15. Montage von Mischrohr und Mischkammer - Assembly Mixing shaft, Mixing chamber
Vložit
- čas přidán 6. 09. 2024
- Hallo Leute,
hier erklären wir Euch wie Ihr das Mischrohr einbaut und Justiert.
Dazu wird Mischrohr mittels Joch und Druckstückmittels und einer Schraube befestigt.
Der Düsenabstand wird auf 14,6mm eingestellt. (dies ist mein persönlicher Erfahrungswert)
Dazu wird noch eine neue Mischkammer mit VA-Brenner eingebaut.
Euer Güni & friends outdoor & survival Team
Hier könnt Ihr folgendes Erwerben:
Petromax 150/500 Verschleißteile, Pumpenleder #46:
amzn.to/2Ap4idZ
Pumpenleder SET mit Spreizfeder, Pumpenleder, Mutter und Pumpenkolbenplatte, für Petroleumlampen:
amzn.to/2BGkcPE
Petromax technische Vaseline:
amzn.to/2kiDVRb
VASELINE weiß DAB Qualität alter Heideschäfer 100 ml Creme:
amzn.to/2BFygZw
Brennspiritus 1 L Spiritus geruchsfrei Premium AHK Bioalkohol Made in Germany:
amzn.to/2j8UWd6
Würth Mehrzweckfett II Graphit 400g:
amzn.to/2kkksj2
Petromax Petroleumlampen HK500/829:
amzn.to/2nikLM9
Petromax Glühstrumpf Einloch HK500 5er Set:
amzn.to/2ki4vd5
Petromax Alkan, 1 Liter:
amzn.to/2nnP44j
Petromax Verschleißteile-Set:
amzn.to/2kimqQY
Petromax Reflektorschirme für Starklichtlampen Chrom oder Messing:
amzn.to/2j9np2w
Petromax Brenner HK150 - HK350/HK500 in Ton oder VA je nach Wahl:
amzn.to/2kfp6ii
Petromax Luftpumpenadapter HK150/HK250/HK350/HK500:
amzn.to/2AlYan5
Petromax HK 500 Original Kiste viel Zubehör Petroleumlampe Outdoor Laterne
amzn.to/2BGjNwr
Petromax Düsen - Nadel Set für Vergaser Petromax Starklichtlampen (5 teilig):
amzn.to/2nrUT0L
Petromax Original Rapidvorwärmer:
amzn.to/2BBoyaJ
Petromax Pumpe HK150/HK250/HK350/HK500 komplett:
amzn.to/2kgTxVe
Petromax 150/500 Excenter Komplett 114, 1430130:
amzn.to/2AlwwX3
Petromax Vergaser mit Dichtung HK350/HK500:
amzn.to/2BDSqmN
Petromax Dichtungssatz für Vergaser & Rapid und Pumpenventil (8 teilig):
amzn.to/2BDetKn
links sind ohne Garantie.
Bitte um PN wenn etwas nicht funktioniert
Danke
It is one those items you buy in life and after many hours of fiddling around amd ordering spare parts - it either ends up on the shelf to be never used again or you throw it away. I have spent so many hours on it: 4 times as much as actual burning hours. Too bad it is so expensive. It does not work and is not made well. The needle does not completely close. The mixing chamber breaks in the housing amd falls of. The pressure build up is a tiny plastic nob and besides it being am excercise it is very uncomfortable for an adult hand. It snaps your finger. The pre burner is hard to ignite and stops very often and restarting is difficult. Might work indoors.... but he!
14.5mm is only achievable when you bend the ring that holds the tube. 12 is the best i can get without putting force on it. The screw that is supposed to hold that distance comes loose.
Patiently worked 3 hours on it again this week. Petromax hk500 is not good for your stress levels. Buy a standard oil lamp - buy 10 of them and still save money and agony
Obrigado amigo ajudou muito
Feliz por ajudar. cumprimento Güni
👍👍👍