Top 5 3D Printed Accessories For A Saltwater Aquarium
Vložit
- čas přidán 1. 08. 2024
- Controller brackets www.ebay.co.uk/usr/aquarium3d...
45 degree frag holder reefparts.co.uk/product/singl...
Tunze ATO holder eBay item #234767667254
Vaccum nozzle marineaquatics.co.uk/shop/pum...
Feeding hatch www.londonaquaticdesign.co.uk...
Corner frag rack aquaprint.uk/index.php/produc...
Nero angle shorturl.at/BCIR2
Aqua Print MP40 flow director allthingsaquatic.co.uk/produc...
Join this channel to get access to perks:
/ @reefdork
The best algae scraper in the world - amzn.to/3lRCOVb
3 test kits every reefer should have:
Hanna phosphate ULR - amzn.to/3PQ2OxN
Hanna nitrate HR - amzn.to/3wWfL1M
Hanna alkalinity - amzn.to/3z8kKxM
My vlogging equipment
Video
Fujifilm XT-4 amzn.to/3LYfyPY
16mm F1.4 amzn.to/3z7706r
80mm F2.8 macro shorturl.at/uvMN7
Fujifilm X-S10 shorturl.at/aQ169
18mm F2 shorturl.at/AX489
Tiffen 85b orange filters amzn.to/3wYhpjh
Elgato stream deck XL amzn.to/3dKLlbn
Audio
Sennheiser MKE600 amzn.to/3me3S17
Zoom H6 amzn.to/3ajJsAO
Focusrite Scarlett Solo amzn.to/3N4Ggrw
Deity V-Mic D4 Mini amzn.to/3pvIKov
Rode Lavalier Go amzn.to/3LYOeRw
Zoom H1N amzn.to/3NMp8qo
Audio Technica AT2020 amzn.to/3AdcGe8
Shure SM58 amzn.to/3Tl9ghH
Sliders
Neewer motorised slider amzn.to/3N5Jsmz
GVM 24 inch motorised slider amzn.to/3N312aL
Lighting
Elgato Keylight amzn.to/3wVM9S7
Elgato light strip amzn.to/3CiZE1e
Raleno PLV-S192 (fill light) amzn.to/3wXGjzt
Lume Cube Panel Go amzn.to/3a69cR8
Art
Jellyfish tank amzn.to/3AcS31r
Micro tank shorturl.at/cnx25
Canvases Instagram @coraldesign.pl
Some of these links have an affiliate code - so if you make a purchase, I get a small commission at no extra cost to you. Thank you!
For any commercial enquiries, please send me a PM, contact me via Instagram or leave a comment below.
0:00 3D Printed Accessories For A Saltwater Aquarium
0:15 Controller mounts
1:12 Tunze ATO bracket
1:46 45 degree angle
2:18 Hanna organisers
2:52 Honourable mentions
3:20 MP40 flow director
This is fantastic!!
You have to remember that not every filament for a 3d printer is suitable for an aquarium, especially for a marine aquarium. A material such as PLA is not suitable because it will biodegrade over time and will release the chemical into the water. Food-approved PETG material is suitable assuming that the particles from the printer head are not in the print 😁. You should also remember that the filament should not be colored (chemistry).
Personally, I am printing covers for 2 marine and 3 freshwater aquariums.
vivid aquatics random flow generator is a great 3d printed item .
I like the MP40 Flow director Alex. Great idea!!
Great list! The apex reagent funnel guides are another great 3D printed item.
Just ordered the ATO pump stand, bloody genius!
Found them . Brilliant. Ordered a copperband feeder in Neon orange . Thank you for letting me know about them. Regards Paul.. 2 months in with my copperband. Bought it from my LFS abyss Aquatic
Awesome I ordered 2 of the mp40 flow directors last and expecting them tomorrow for my wb220.6. Glad you rated them number one
I recently bought a anemone guard for my Nero! So awesome!
Brilliant advice
Nice one Alex! 😀
Great video
Thanks ! There goes my year end bonus !
Thanks, Alex. There were a couple things on there I didn't know about; such as the 45 degree frag holders that could come in useful. I've been attaching some choice frags to heavy duty rubber coated neodymium magnets on my back wall, but once they're encrusted I've been wondering if the rubber would break down and expose the metal after some time. You mentioned interest in the DIY EcoTech Battery backup. I've posted a new video on how to build that on my channel if you're interested. Keep up the good videos!
Excellent 👍
Ok, didn't expect to be impressed, but the Hanna organizers would be nice since I always seem to have to open ALL of them to get the one I need, and the hinges are about shot. Like those 45 degree things too.
2:49 and there's even place to hoId a pair of scissors 😋 I printed myself a couple of random flow generators for the 3 pumps on the back of my Red Sea max s... Works like a charm.
Uff i need those 45 brackets for plugs and the neros🎉
Great vid. It's worth investing in a 3d printer for yourself if you are a bit technical. That flow director is well under £1 in material. But is worth paying the money if not technical as someone has spent the hours designing it
Bought one last week 😅
What about a flow director for the MP10s
Noice~
Perfect timing I'm getting a 3d printer tommorow :D
There's a thread on Reef2Reef with a list of aquarium prints...
humble fish has a pretty good list going as well
@@ReefDork thankyou I'll have a look there's already quite alot things I want to print and adding the price of buying them up from ebay I worked out the 3d printer itself would actually be more cost effective. 😄
I use my Ender 3 v2 all the time… the only drawback is your imagination.
Can’t see the hanna organiser? Do you have the links for it still?
What is that copperband feeder ? Where can I get one . I can't find it online
Good overview! My Hanna checker holder is wall mountable and even better, is available for free. Those were some stiff prices
Yeah I saw yours the other day! I've bought an Ender 3 so I'm scouring Thingiverse for reefing kit now 😅
@@ReefDork right on, for as much as many of us reefers spend on our equipment in general a 3d printer is just a tool and a no brainer in my opinion based on the investment. A reasonable entry level printer is $350 USD or less.
I'm too tight to pay for controller mounts. The 45 degree frag racks are awesome (does glue really hold them?) I got 3 single mounts from Aqua Rocks after seeing Jake Adams wearing their TShirt - and they are awesome - wish someone made that in Europe.
Most of these are not so universal but pump cages that direct flow is a great idea and probably number 1... I don't know.
I think Random Flow Generators are probably the best overall and I live my pod hotel - ok it's silly BUT if you have a new wrasse in QT you can just move the pod hotel across and... voila (who knows if it works).
What I REALLY want to see is light mounting options - Radion mounts (for example) are ugly and most options are super expensive. T slots (or whatever they are called) should be at LFS's and they should have some 3D attachments and people could also get custom ones - that would solve a lot.
The best part is that I have a 3D printer.
Where did you find the ai nero parts, after the one that adds more angle
Link in description - Reef Parts
Where abouts did your purchase the Hanna tester holder ? I've recently used a great company to 3D print a bracket to attach my Reef Brites to my Radions. This is another great video, thank you.
Reef Parts
How did you mount the 45 degree frag holder to your overflow? Did you just glue it?
I tried superglue but it doesn't work, so I use silicone
Have you got a link for the Hanna Checker organisers?. I can’t find them in the U.K.
Check out reefparts.co.uk
What is the link for the Nero 5 bracket, it doesn't seem to be a link in the description.
Check out reefparts.co.uk
Hi Alex, where can I buy the 45 degree frag plugs from ?
Reef Parts
Does the vacuum attachment suck gravel straight into the pump?
Yep - it can clog, especially if it's not really fine sediment
I know this question is off topic. I know you have a Midas Blenny and I just got one two days ago. Are there any specific care requirements? I plan to feed 3-4 times a day. I read a post on reef2reef that said they need to be fed more than people realize, but this guy was the only person that said that, but it made me worry. What he described on the post was a sunken in stomach, but that sounded like an internal parasite. The guy at my LFS said he was skinny when he got him so he fed him 3-4 times a day to fatten him up. I hope I can keep this fish because I love him. He is starting to eat.
No special feeding requirements that I'm aware of - they only live about 4 years so if that's how old this guy's fish was, that explains it looking sick.
The shorturl links don't seem to work - they take you to the "Create a short url" page rather than the destination. Great video!
That's annoying, thanks I'll try to fix it...
have you ever printed an AQUARIUM piece in PLA... and has it lasted inside the tank without falling apart... i am hearing 2 different experiences with PLA.
No, people in the know only use PETG so that's what I use - not worth the risk for me
Do you still use MP40 pumps? Didnt you have Issues with rust?
Yeah, the wet sides can rust but you just need to keep an eye on them.
@@ReefDork I feel like any kind of rust is a BIG No No. What do you do once you find rust? Buy a new one? I mean, I totally get the upside of a removable wet side for cleaning. But that sounds like a very risky game of poker to me.
most of the stuff looks brittle and really rough quality - or is it the video that makes it look that way
3D printing does produce a less perfect finish, but the quality is fine
People are over charging for 3D printed parts
And some sell other people's designs that are for personal use only...
2:30 As a chemist, these Hanna stands are particularly triggering..... Is it really that hard to get the symbols right if you are smart enough to invent 3D printed models? "No" is nobelium, which is a synthetic element and nothing even remotely like nitrate ions.