Amazing Homemade Wood Log Splitter !
Vložit
- čas přidán 24. 03. 2021
- SUBSCRIBE to my Secound CZcams channel link here..
/ @balkanmrdkdiy4741
Thanks to all..
Amazing Homemade Log Splitter Wood Processing Machine using Worm Gearbox 20:1 and el.motor 2.2kW three phase...
For more DIY Videos press the link ..
• SIMPLE HOMEMADE ELECTR...
And here ....
• MAKE A USEFUL DIY TOOL...
by Mr.DK DIY
SUBSCRIBE LIKE AND SHARE !!!!
My FB Mr. DK DIY page: / youtubecrator
My Twitter page : / dejan_bmb
My Instagram : / mr.dkdiy
All of my DIY videos I have done for experiment and my challenge, if you make these videos at home and something happens to you I will not be responsible for anything !!!
Welcome to Mr. DK DIY channel
My channel include of guiding videos:
-DIY
-How to make
-Awesome ideas
-Tips....
✅ Thanks for watching!
🔔 Like, Share & Subsribe my Channel
Thanks for your Support !
#mrdkdiy #wormgearbox #woodsplitter - Jak na to + styl
На редуктор поставь шкиф побольше, чтоб обороты уменьшить, а сила увеличится.
Дрова какие-то игрушечные. Надо берёзу сантиметров 30.
Nice work buddy, but quite dangerous. Why dont you make a push pedal type toe switch, so wen u want to break the wood u tap it with your toe and the device starts to turn. Wen u let go, device will stop. That way more safe.
Felicitaciones bonita maquina,pero muy muy peligrosa,primero deberias bajar la velocidad de giro con un reductor y lo otro colocar un boton mas de emergencia mas al alcance de alguien que pueda socorrerte si la maquina te agarra la mano o el brazo...saludos amigo desde chile.
Nice work 🎉
Thanks 🔥
Thumbs up if you’ve still got 2 thumbs!
Классный дровакол!
Zagen zonder beschermkap is levensgevaarlijk.
Зменшити оберти і. буде супер 👍
Автор прошло два года ?!!
Ты ещё живой???🤣🤣🤣
Отзовись!!!
🤣🤣🤣🖐🖐🖐😉👍
Hahaha, this is like medieval torture device for wood 😀
😁😁👍😉
Классный агрегат супер!!!
Very Nice Job DK!!!
would the motor need to be a 3 phase one or what kind of hp would it need to be? this would be perfect for a wood chunker that I would like to make
Video klass, super! 👍👍👍🔥🙏
Молодец. Лайк
That machine is all most to dangerous to be safe ! I love it 👍👍👍.
Although rare, damage can be done to the motor when it is attached to the frame while welding. Stray current can flow through the windings. It’s better to remove the motor when welding.
Awesome, any ideas where to find a gearbox like that?
That’s awesome 👏 👍 it so much
Thanks a lot my bro 👍👍
Greath work man !!!
Thanks for Nice comment 👍👍
Fun project
good idea. it was incredible
Thanks for Nice comment
Super odradjeno!
Hvala Puno brate 👍😉
Iz dakle si ti +??
My opinion : rotate axe should be slower ...
Good job I wonder if OSHA would approve. I,know I,do
Топор надо сделать каб рубил на четыре части, а то и на восемь. Как у промышленных дровоколов. мощности хватит если сбавить обороы и повысить усилие на валу
Você é demais 👍
👍👍👍
I GUESS ALRIGHT IF YOU'RE NOT SERIOUS ABOUT DOING FIRE WOOD TO LAST YOU A WINTER.
Big like
Thanks
I have similar project like this but with 3 phase 750w 700Nm electric motor 1360 rpm reduced with drivetrain to 8 rpm on axe.
But I will use direct conection without belt.
A bit quick that axe blade don't you think? I would slow it down, presuming the motor has enough torque and the easiest way is to fiddle about with the pulley sizes.
Чёткий агрегат.Тока у меня шота булки сжимаюца .
You can make wood splitter with motor and reducer. Nice video
Yes thanks
Надо площадка, чтобы деревяху не затягивало.
На уровне изобретения.
этому изобретению сто лет в обед...
🤣🤣🤣
Good work👍👍👍🍻
Thanks bro
Всё нормално на привари на топор два упора в виде треуголника тогда ещё лутше калоть будет чюрку.
Super 👍
Thank you 👍
аппарат классный но пальцев только десять и они не отрастают
Dobra izvedba ali malo nevarna drugače dobro
Такие палочки можно сразу в печь бросать
Nicee👏👏👌
Thank you! Cheers!
Super👌👌👍👏👏👏
Super🔧🔧🔧😉😬😁
Nice👏👍👌
Thanks 😊
Leave a comment here 👇👇👇
Thanks for your support
Like SHARE and Subscribe
Thank you 😉👍
Good 👌👌👏
Thank you! Cheers!
There's no doubting your ingenuity but Three Phase wiring without so much as a gland or proper cable anchors? No chain guard either! Your chain-drive would easily take a hand off!!
Wow OTT.
Надо лист метала за колуном приворить, что-бы пень упирался
👍👍
You are very skilful, master. It would be an honor for you to work by your side. 👍👍👍👍👍👍
Thanks for Nice comment bro 👍😉
I have 6hp motor. When my axe touches the wood, my motor pulley spins, but the gearbox doesnt move. What am ibdoing wrong?
25:49...а рабочий стол всё же нужен...такой как у всех хотя бы...
Super
Thanks a lot for Nice comment
fuerza centrifuga, netamente peligroso para las manos, yo estaba pensando en la broca cónica
А конеческое сверло безопасно?
What mortor use for this machine
put in there a lump I'm wondering how it splits?
I think the speed should be slightly reduced for better safety.
Yes bro thanks
Real deal chopper well done bro ,
WHATS THE WOOD FOR? TOO SMALL FOR HEATING, LINCOLN LOGS?
💯💯💯👍
👍👍👍👍
nice welder , still crude where it was put together , is anything square , if taken a little more time , this might have made to last, only my opinion
Nice
Thanks
👍👍👍
Атракцион " Лишние пальцы"!
عالی
Слишком высокие обороты, и так же нужен натяжитель ремня
Great work! Can you share the HP of the motor and the ratio of the gearbox?
Motor is 2,2kW and gear ratio of gearbox is 20:1. All mentioned in video
@@lojzofilipek5747 would you know about how much a gear box would cost?
As soon as I find a gear reduction box I am going to make me one of these I’m in to build an outdoor furnaces and log splitters and fireplace. Heat exchanger but I’m going to build this thank you
Thanks a lot
Здорово.
👍
What did that old gear reducer come out of?
I don't know bro really i found that 😉👍
У редуктора корпус алюминевый?
👍👍👏👏
😉👍
I've split 5 cords through it so far. Does what I need it to. czcams.com/users/postUgkxUyQswtttSffRMblGbrhCvZn7JkhtG1-7 I scrounge all my firewood and am not equipped to handle big wood, but for logs up to 24 inch diameter or so, it works great. I've been amazed by some of the gnarly bur oak and elm crotches it has split. For the tougher stuff within it's size range, you might have to study the piece a bit to decide the best attack, but if you split smart it's up to the job. It did arrive low on oil, and I was would have nicked it half a star for that, but it has regained my full confidence. UPDATE NOVEMBER 2021: Still going strong after all these years. I love the one-handed operation. Hope it's still in production if I ever need to replace it
Olá, quantos CV esse motor ?
👏👏👏👏👏👏
👍👍👍😉
Больше на щипачку подойдёт
Nice stuff! What do you use as a cover for your camera while welding?
Thanks 👍I use Adobe premiere pro 😉
Were are you from?
@@MrDKDIY From Kuusamo, Finland. So, the effect was digital after all. Works for the viewers, it seems. Kudos!
Nice Finland 🇫🇮👍👍
👌👌👌👌
Thanks 😉🔧🔩
Za duże obroty a to skolei większe niebezpieczeństwo
Продавате ли или не дровокол, и ако да каква е цената
By force or 220v
Добрый день, на продажу есть у вас такой дровокол?
no bro
@@MrDKDIY 🙌🏻
Нельзя варить через подшипник.
👍👍👍👏👏❤❤
😉😉😉🔧👍
Quanto custa rachador de lenha...?
Мужик (пересмотри видео) и сделай правильно !!!
Motor hp?
What is gear ratio of gearbox
На редуктор шкив нужен раза в два больше!
Giró muy rápido, tronco muy pequeño.
Bravo soprattutto per la sicurezza ,quella l hai messa prima di tutto👍
How to motor use HP
Ware are you from
Macedonia
🛠👊👊👊
Thanks bro👍👍👍👍
Эл.включатель закрыть сзадней стороны.
👍👍🇯🇴🇯🇴
З чого редуктор?
шкив надо поставить больше на редуктор