04 Turbo Cavalier Build: Mounting The Turbo
Vložit
- čas přidán 6. 09. 2024
- 2004 Chevrolet Cavalier
In this video we get the turbo header on the car and clear out some room for the turbo, then we install the turbo and tighten everything down. In the next video we'll go over everything that is already done to the car and we'll finish up the piping from the turbo to the intake. For now this car has the stock engine and transmission, but there are big plans for this car in the future! This is not a customers car. Thanks for watching! Be sure to subscribe to follow the build of this car and others!
_________________________________________________________________
chevrolet
chevy
cavalier
03
2003
04
2004
05
2005
Ecotec
eco tec
2.2 liter
2 2 liter
4 cylinder
boost
psi
p s i
boosted
turboed
turbod
Thinking about doing this on my 04 🤠
I have a 02 pontiac grand am it has the same engine and I was wording where did you get all this stuff for this build I want to do something like this to my car if that even posable
I’m curious to I have a Cavalier as well and want to add power
Be soft on the timing above 15 psi I lifted #4 ring land last weekend on the stock piston
I'm going to run it on 10psi until I get forged internals and a built transmission. Thanks for the info though! Much appreciated.
You will have plenty of room for safety on 10 psi depending on turbo. I’m running a super 16g but will be upgrading to gt35r after build
@@jewlenskyy5993
I've just got a cheap Ebay turbo on it right now, but when I build the other motor it's getting a BorgWarner ball bearing turbo.
10 psi on super 16g and run +26 on timing on my daily pos cav
Hey now we’re talking. Lol I’m ready to see some boost. I’m ready to see my old mustang on the channel
Should be fun when we completely build everything on this car and get a better turbo. It weighs 2500 pounds with me in it. When the build is completely done we're shooting for around 500whp.
got an 04 base model 5 spd. only options were pwr sunroof and the sportier suspension lol...been driving it for 16 years and thinking about turboing. the reviews on the obx are horrible, what do you guys think of it now that it's been a few months?
So far so good! We haven't really got to drive the car yet much though. If you subscribe to my channel, I plan to finish this car up soon. There are a lot of things I want to do to it, eventually it'll be fully built, my plan is to make around 500whp with this car. And you won't miss anything we do with it, cause I record everything.
What tune r u guys gonna use
Got the same car same year to haha mines red tho 👍 going S/C with mine
We'll get back to building this one soon!
what sc kit are you gonna use ?
@@joshua13js zzp kit stock m62 blower from the cobalt ss
Just run the charge pipe to the intercooler and put a filter on the turbo
There are newer videos of this car on my page. It will be done soon!
Do you guys still have the LTG powered Camaro?
No we got a 2019 ss since the ltg was totaled
👀
Where did you find a manifold that fits? I can't find any turbo parts for an 04
We just looked one up for this engine, not this car, then we made it work, lol.
@@1018Video what about the egr passages that go into the stock manifold? Is it okay to block them with the new manifold? I would think that would throw an egr code right?
@@josephstevens4032
We just removed all of that, when the car gets tuned that will all be deleted and turned off in the tune.
What turbo kit did you guys use and where from?
Just a cheap Ebay turbo for now, but later I'll be upgrading it to a BorgWarner ball-bearing turbo.
@@1018Video thanks!
@@Lodus_beatbox
Thanks for watching!
The like button won’t work