Man do I miss Ron. 😔 He helped sooooo many people when he was alive, and is still doing it. I really wanted to meet him before he passed away. Really a smart guy and a blessing to all powerstroke owners!
Another great video, I've watched every video of yours. It's crazy knowing you're gone, gone but not forgotten. Thanks for all your videos, I learned so much from them! Rip DieselTechRon
ive been a diesel mechanic/shop owner for 42 years now with experience on everything from volvo to i detroit but whenever i . work on a ford diesel i go straight to rons videoes. the man was a legend and his knowledge and experience will be greatly missed. i wish i could have met the man in person. god bless him and his family., steve ehrhart ,ehrhart iindustrial alvin texas
I just want to thank you for keeping Ron's videos up. I am very sorry to hear about his passing. my 6.0 seems to have a skip during idle and at crewsing speed high gear once warm. does great when cold and while excel. scangauge numbers are where they should be. getting codes for fuel contributions for 1 and 5. skip can cause violent vibration until I let up off the excellerator. I'm stuck till I can get a metric adapter to test dynamic fuel pressure. did change oil/filter. fuel filters upper and lower. lower was at about 80% used up. upper looked good. hifm seems to have a sappy film in the bottom. put atf 8n fuel lats fill up to clean fuel system. not as bad now, but I still have a skip.
The ratchets are the same size. I use 8 and 10mm most of the time so I like the 1/4. I buy them off a tool truck but they cost more. I have six and bought more than that for people off ebay. Cpo outlets is a seller with good prices.
Ron, so appreciate the tips, videos, and efforts you make to help us all! You should be sponsored by these guys and milwaukee (ratchet). Take care. Joe
The software is Fords ids system. It is windows based and I have issues with windows 8 and tablets. That's why my videos always show different computers. I'm trying to find a reasonable one with a full size USB port that works good. The surface pro did good except entering vins on programming. I can't say aliexpress.com so do some research or buy from Ford.
I guess my concern would be feedback. I've seen better results with rev-x than hot-shot. So I guess I need to get on forums and read and use this on some trucks this winter and test it.
I will try and locate the article and post a link. Archoil is as good or better. Again we are dealing with opinions here so I would suggest trying it for yourself.
I have a 05 f250 that is white smoking at idle and take off. Truck on has 110,000 miles. Has egr delete no loss in coolant. Could this be caused from stiction?
Do you have to do an oil change first to use this or can I add it when I had an oil change 1500 miles ago? I just found out about these products and sounds like identical problems you had with this truck.
Hi there, I have 2005 Ford Excursion 6.0 Diesl ( almost 400.000 km), everything original except EGR blocked. Problem: misfire. My actions: replaced oil and added sticktion modifier Arch oil, fuel pressure 50 psi,. But still misfire and didn't react when apply to gas pedal and stalling ( even with good fuel pressure). Please help me to identify the problem. Regards, Evgeny
@@thebear6751 Yes, you are correct about MOPAR AUTOMATIC TRANSMISSIONS.... M - must O - order P - parts A - after R - racing OVER MY DEAD BODY, WOULD I OWN A DODGE....POS!!! JOHN KEATING
Man do I miss Ron. 😔 He helped sooooo many people when he was alive, and is still doing it. I really wanted to meet him before he passed away. Really a smart guy and a blessing to all powerstroke owners!
Another great video, I've watched every video of yours. It's crazy knowing you're gone, gone but not forgotten. Thanks for all your videos, I learned so much from them! Rip DieselTechRon
ive been a diesel mechanic/shop owner for 42 years now with experience on everything from volvo to i detroit but whenever i . work on a ford diesel i go straight to rons videoes. the man was a legend and his knowledge and experience will be greatly missed. i wish i could have met the man in person. god bless him and his family., steve ehrhart ,ehrhart iindustrial alvin texas
10 years later and still helping people. RIP dieseltechron.
I just want to thank you for keeping Ron's videos up. I am very sorry to hear about his passing.
my 6.0 seems to have a skip during idle and at crewsing speed high gear once warm. does great when cold and while excel. scangauge numbers are where they should be. getting codes for fuel contributions for 1 and 5. skip can cause violent vibration until I let up off the excellerator. I'm stuck till I can get a metric adapter to test dynamic fuel pressure.
did change oil/filter. fuel filters upper and lower. lower was at about 80% used up. upper looked good. hifm seems to have a sappy film in the bottom. put atf 8n fuel lats fill up to clean fuel system. not as bad now, but I still have a skip.
Fuel pump
The ratchets are the same size. I use 8 and 10mm most of the time so I like the 1/4. I buy them off a tool truck but they cost more. I have six and bought more than that for people off ebay. Cpo outlets is a seller with good prices.
You know it’s bad when your 6.0 sounds like a 7.3 lol
Awesome vid brother! Nice to have guys like you share some info!
Rev x worked in my 6 liter. $40 a bottle in Canada. I recommend using two bottles first time and one every oil change after.
I miss this man !
never tried it but I see another video coming.
Hope these videos still up I use them a lot when working on my 2005 Ford 6.0
Ron, so appreciate the tips, videos, and efforts you make to help us all! You should be sponsored by these guys and milwaukee (ratchet). Take care. Joe
The software is Fords ids system. It is windows based and I have issues with windows 8 and tablets. That's why my videos always show different computers. I'm trying to find a reasonable one with a full size USB port that works good. The surface pro did good except entering vins on programming. I can't say aliexpress.com so do some research or buy from Ford.
Thanks
thanks for the socket plug, I have all 7.3s and hate the fuel filter cap
I guess my concern would be feedback. I've seen better results with rev-x than hot-shot. So I guess I need to get on forums and read and use this on some trucks this winter and test it.
I will try and locate the article and post a link. Archoil is as good or better. Again we are dealing with opinions here so I would suggest trying it for yourself.
Funny I just found out about this product today and decided to use it. Looks like a good call
Hey Ron What kind of diagnostic system is that? I see it is some kind of windows tablet, what program is this and where could I get the same set-up?
Ron excellent video, very helpful. What software are you using there?
I wanted to also add. Have you considered polishing the spool valves as a cure for stiction?
Can you do a test like this with archoil9100?
I was wondering if anyone knows the diagnostic software DTR is using in these videos? I'd love to get this so I can do better diagnostics on my truck.
I have a 05 f250 that is white smoking at idle and take off. Truck on has 110,000 miles. Has egr delete no loss in coolant. Could this be caused from stiction?
what software is that to check the parameters and how much does it cost per year? thanks.
Now do always add rev x to fuel filter area or fuel tank
Hey Ron, could you do a solenoid body removal on the 5r? I need to replace the line pressure control solenoid. Sorry to derail video thread. Thanks
Hey Ron, ever tried ARCHOIL 9000?? Works pretty damn good as well and cheaper
Where do you buy that stuff
Ron, why do you prefer the 1/4" vs 3/8" M12 ratchet? I can only find the 3/8 locally. Is it shorter?
Do you have to do an oil change first to use this or can I add it when I had an oil change 1500 miles ago? I just found out about these products and sounds like identical problems you had with this truck.
Hi there, I have 2005 Ford Excursion 6.0 Diesl ( almost 400.000 km), everything original except EGR blocked. Problem: misfire. My actions: replaced oil and added sticktion modifier Arch oil, fuel pressure 50 psi,. But still misfire and didn't react when apply to gas pedal and stalling ( even with good fuel pressure). Please help me to identify the problem. Regards, Evgeny
Ron passed away. May he RIP.
Would a bad injector cause power loss until I get to 3000 Rpm?
Is the enhance mode only available to dealers as my IDS doesn't let me do that, and the worse part I'm paying 700 every year for the license.
no my buddies ids has it, he just is a work out of his truck mechanic on his own
Will the rev x be ok with new injectors?
no injector clattering when tuned on
Should Try Turbo Maxx works much faster cheaper and change oil twice as long.
Turbo Maxx I wouldn't go twice as long as this Engine lives on the oil
Ahh the trusty David frank frank
just bought some of this stuff
is this a add every oil change kinda product?
larry yep usually they all are
Wow.
Go with cornwell
Truck needs an oil cooler.
Solve all your problems. Buy a Dodge.
Never!!
@@thebear6751 Yes, you are correct about MOPAR AUTOMATIC TRANSMISSIONS....
M - must
O - order
P - parts
A - after
R - racing
OVER MY DEAD BODY, WOULD I OWN A DODGE....POS!!!
JOHN KEATING
Who would even look at a Dodge if it didn’t have Cummins? Nobody