1978 Chevy Blazer Pulldozer Mad Mudder 1/24 Scale Model Kit Build How To Assemble Paint Decal
Vložit
- čas přidán 21. 02. 2023
- www.modelroundup.com/1978-Che...
#Scalemodel #chevy #blazer #ICM #Kit #Reviews #Plastic #Scale #Model #Models #AMT #Tamiya #TamiyaUSA #Revell #MPC #Academy #Italeri #Ford #chevy #Tank #Armor #Aoshima #Hobbyboss #Modelroundup #Tool #Tools #onedaybuilds #onedaybuild #tested #scalemodels #hpiguy #hpiguys #scalemodels #Scale_model #hobby #hobbies #adamsavage #2023 #model #models #modelling #scale #modeling #weathering #howto #diy #create #make #STEM #future #floor #polish #tutorial #decal #decals #waterslide #automobile #fomoco #moebius #modelkit #kit #rust #rusty #rusted #rustoleum #puller #pulling #kseries #cseries #1978 #offroad #offroading #4wd #silverado
REVELL MONOGRAM 1978 CHEVY BLAZER 350 V8 PULLDOZER PULLED PORK MAD MUDDER PULLING TRUCK 85-4532 14532 RMX-4532 RMX4532 4532
If there’s such a thing as a classic truck - pull vehicle, the Chevy Blazer is it. This “Mudder”, equipped with a powerful V-8 engine and oversize tires, can match brute horsepower against a sled loaded with thousands of pounds of weight.
Multi piece V8 engine
Chevy “Moose” motor with two- 4-barrel carbs on a high rise manifold
Massive Tires
Detailed interior
Detailed suspension
Kit Features:
• High-performance Chevy small block V-8 engine
• Massive off-road Ire.
• Raised 4-wheel-drive suspension
• Competition-ready equipment including racing drivers seat, roll bar, and eight suitcase weights.
• All-new decal sheet with American county fair “Pulled Pork” graphics.
• Molded in white and clear with chrome plated parts and black vinyl tires.
Parts count: 122
The Chevrolet Blazer is an automobile nameplate used by General Motors for its Chevrolet brand since 1969 for several SUV models:
The Chevrolet K5 Blazer is a full-size sport-utility vehicle that was built by General Motors. GM's smallest full-size SUV, it is part of the Chevrolet C/K truck family. Introduced to the Chevrolet line for the 1969 model year, the K5 Blazer was replaced for 1995 by the Chevrolet Tahoe. The third generation was simply called "Chevrolet Blazer", without the K5 name. In 1970, GMC introduced its own model of the truck, called the Jimmy, which was discontinued in 1991 and replaced by the Yukon. The "Jimmy" name was chosen to reflect how GM may sound in a similar manner to how Jeep was thought to be a pronunciation of GP in the competing market.[citation needed] Both were short-wheelbase trucks and available with either rear- or four-wheel drive.
The K5 Blazer and Jimmy had "full convertible" removable tops until 1975. For 1976, GM introduced a half-cab design that was less prone to leaks and slightly safer in a roll-over. These half cabs had the convertible top begin a few inches behind the driver/passenger doors and run back to the tailgate.
The Blazer's long-wheelbase relative, with an integrated rear body and doors for second row passengers, is called the Chevrolet Suburban.
For 1973, GM's line of full-size trucks was redesigned and updated; internally, GM named this the "Rounded Line" generation, while the unofficial nickname was "square body".[8] A tilt-steering wheel became optional.[7] Although rear-wheel drive Blazers were manufactured until 1982, the majority sold were four-wheel drive. As tested by Popular Science in 1973, a K5 Blazer with the 175 hp (130 kW) 350 V8, automatic transmission, and full-time four-wheel-drive accelerated from 0-60 mph (97 km/h) in 22.5 seconds, with an observed fuel economy of 9.648 mpg‑US (24.38 L/100 km; 11.587 mpg‑imp) at a steady 45 mph (72 km/h).[9] With the standard 250 I6, automatic transmission, a 1974 K5 Blazer returned fuel economy of 13.69 mpg‑US (17.18 L/100 km; 16.44 mpg‑imp) at the same speed.[10]
The 1973-75 K5 Blazers were equipped with a removable convertible top. In 1976, a half-cab design was introduced and used until 1991.[11][12]
The second generation K5 models incorporated the rear hatch glass and tailgate into a single unit, which allowed the glass panel to retract inside of the tailgate by use of a manual crank mounted on the tailgate or an electric motor activated by a key-operated switch on the tailgate and a dash-mounted switch.[13] The weight of the large glass panel was rumored to be a liability as the manual crank gears wore prematurely and the electric motor was prone to frequent overheating and subsequent failure. This also included the electric motor drive cable which goes to the window regulator to the motor (similar in design to a speedometer cable), which usually would fail under heavy abuse. Another feature of the K5 Blazer tailgate was the safety switch connected to the electric motor which prevented the rear window from being raised if the tailgate was unlatched.
The smaller S-10 Blazer, based on the compact S-10 pickups, debuted in 1983;[4] the K5 prefix was used until 1991 to avoid confusion with the smaller utility vehicle. - Auta a dopravní prostředky
I agree that the full instrumental music is calming and just perfect for the painting process.
Same kit as the old MAD MUDDER awesome kit awesome build
Just got back from the Truck & Tractor pulls, went into my local Hobby Shop and saw that kit on the shelf. 🙂 Grabbed it and really looking forward to the build!!! 👍👍
Right on dude
I look forward to your build, Tim. 🤟🤠👍
@@modelcars2978 🙂
I just ordered one but to build a stock Blazer that was missing a body and interior tub.
@@grb351 That's cool!!!
Chris you're a beast. Your spray booth looks like my spray table for the cabinet parts I spray lacquer on.
Really dig the painting music 🎶👌🎧🎼🎨
I'm building this kit and it's coming along nicely 🎉 maracas 🎊 oh' la
open the box, ditch the decals and instructions cut the inner wheel wells, rear tank and get building! endless possibilities with this kit! Glad its been re issued.
you have great patience and a very steady hand
Looks Great!
One of your top Best!
Colors and Graphics Pop!
Awesome always cool ride 😎
You must not drink coffee. You have a steady hand. That way you tint the sun roof,very cool
that monster truck came out gr8
Damn it! Now I gotta buy this one and try and sneak it into the house. I think she's onto me!
Those decals are absolutly amazing. It REALLY makes the kit POP! Great job!
You did a great job with that one Chris, and it's true real men drive Pink trucks 👍👍
it seems like you had a lot of fun building this kit.
Impressive build. Once again, it's about the details. However, and I hate to bring this up, but the driveshafts are the wrong shade of silver. It would be tempting to paint over them, but that would add a noticeable scale 3/16" in their size. So just strip the paint and primer and repaint - should be easy and will add a serious improvement to the build. Please be laughing about now. No joke - this is a beauty truck. Thanks again for sharing your works.
Ordered just seeing opener, didn't even watch video. Now, great video Chris keep em coming I'll keep watching.
I love this build and presentation Chris!! Your color choices are perfect!!
Very cool👍
Wow that is awesome, I just subscribed I’ll be watching for more I turned them into remote control 1/24 scale I’m watching now
Thanks, keep having fun!
That build is awesome 👍
Love it,especially the piggy tail,nice build sir.Thanks for sharing.
Such a cool kit! Great build! Thanks for sharing.
This is terrific - great job on it.
🧑🏽🎨 it did popped out in my notifications, so i clicked on it right away 😅😁
I used to have a 1976 Blazer, K5
Oh so many memories....
🤫 i lost my virginity in it 🥰
Great looking kits and build. I love that the bed is attached to the cab.🥓🥓🥓
Looks awesome 😄 thanks for sharing... cheers
What an awesome build! Thank you for posting this.
Glad you like it!
I really hope they start bringing back these older kits
Very well done on the Chevy Pull Dozer Chris! I love the contrast between the Electric Pink body and gloss pink chassis along with that black! Excellent detail work!
Awesome job Chris, cant wait to get my hands on this one
Really nice build. I used to have an original Monogram Blazer Pulldozer years ago when it was a new model.
Seen your show, called my hobby shop picked mine up and I rem. The older monogram kit I built , I still have some original parts from that kit .
Cool kit! Nice job Chris😎👍
Yo that is AWESOME!! I hope these don't sell out.
DOING THIS ONE RIGHT NOW
Looks awesome!
That's one awesome kit. Great job as always!
I wish they’d reissue some ford 4x4’s like this .
That's one cool looking pull truck.
I love your assembly and painting method. I always removed all parts and cleaned molding lines and did any custom work I wanted. Then primer everything and begin painting and detail painting everything and let dry for 2 days then I only clear coated the body. All is left is assembly and then decals. Giving the time I had it usually took 5-7 days to complete. My trick to assembling painted parts without glue ruining them was I used a toothpick. It takes such a tiny amount of glue.
I hope they come out with a stock version!
Another excellent build! Would have loved to have seen how you do the highly-detailed chrome bits like the rain rails, etc.
Great job as always, I found that cutting out the rubber inside the tires flush with the sidewall’s makes fitting the wheel the best fit for me
Nice looking build sir! Almost bought but picked the Silerado!
Are you gonna be doing a video of the new 99 Chevy street truck? Awesome build as always👍🏽
Got mine in the mail today
Wild paint job and tons of decals! My kind of kit! Just getting tired of that slow boat!
I’m going get one and build it up
That was the spare tire carrier and gas can the two bubble lights were part of a light bar and the two braces were to the roof rack parts were from the sheriff's blazer and the first run of the blazer kit
Great build up by the way....
Yup, thats true and the bubble lights were from the Sheriff's Blazer kit by Monogram.
Found a bottle of Elmer's glue at dollar general that is crystal clear and can you tell me the review of the model with the metal injector stacks please thank you
Very nice build of a nice kit. I really like the kit, but I would really like to build a stock Blazer. Thanks for sharing.
I built the actual mad mudder pickup truck with the fleetside bed it was a molded red 78 Chevy Silverado k10 model i bought from the Harmon's Chevrolet restoration parts shop in Geneva Indiana around 1992
I can understand the issues with the tripod gm stainless mirrors I built them for a 72 Chevy Cheyenne super truck kit I put together when I was in highschool and after a few years they kept falling off and I put the west coast mirrors from the 53 Ford truck on it
A little kit bashing from the 76 Chevy pickup 4x4 & and it could by built stock
Got 2 from store. I would drive the helll out of it. Lol
I had the older version of this kit the body was painted green on the cover
Looks like u could do a kit bash with the sister kit 77 gmc and get a stock blazer
Or the 76 Stepside.
For some reason I want to go to Puerto Rico.🤔
"you can't build a stock Chevy Blazer from this kit"
"challenge accepted"
You Can DDOOOO-IIIIITTT ‼️‼️👍🤣😂
Actually, the only parts you would need are the stock hood, seats, intake manifold, rear roof, and tires. The rest is still there. Or you could use the stock engine from the 76 Chevy Stepside. Easy conversion.
Just go source you the stepside you mentioned and the revell GMC Sierra tow truck molded in orange I realize it was a snaptite model but when you see the kit you'll know why it was suggested and they also sell a plow truck based off the tow truck
Another cool square body truck is the 84 gmc k1500 its a short bed i believe it is also based off of the blazer and the original monogram chevy 76-79 fleet side pickup monster trucks it i believe is a ertyl kit though it is what was released and people made Fall guy decals for it, but if I build one im probably going to try to track down another one of the original 4 Chevy square body fleet side monster trucks or maybe reissue of the three that came out in the late 1990's one was pink, yellow and i think black.
Fully understand that sir I had a 78 gmc High Sierra k15 with the silver painted ac bezel and dash pad applique plaque its actually the same black one trim outer lip in argent silver you find in the 78 Chevy k10 scottsdale i know because I had one of those two ..
Chris this Blazer is actually based on the stock 1976, not 78, squarebody by Monogram. Most of the parts are there for a stock one except for the rear roof, stock hood, seats, and tires. I hope Revell will reissue the stock version again. We need a squarebody Blazer. Maybe retool a 78 grille as this one is a 76. Great build as usual. Already ordered one.
I built the same mad mudder molded in red I believe it was actually the ground pounder I was thinking it was a 78 it may have been a 76 but yes the cab and seperate long fleet side bed, but I think my favorite gm square body grille they have done so far is the 79 I think it is desert dunes GMC Sierra jimmy k15 with the removable half roof shell, and the custom hood and scoop and the revell snap tite 79 GMC Sierra tow truck is almost the same truck
And I believe I still have the green version art and body of the mad mudder I robbed the chassis for the GMC Sierra jimmy k15 desert dunes it got broken years ago and isn't one you could just find 10 years ago..
Built old version was a fun build then pull truck may pick one up to replace it
So beautiful.... Saw on at the hobby shop today but really don't think imma be able to build it or have time to :/ I might have to try and find someone who would sell an already built one any ideas where to look?
I think it’s a super cool kit and I’m sure sill be picking one up. On a disappointing side note, I can’t understand why they’d include 5 lug wheels in this kit. With that said, the Ground Hawgs look amazing! Another awesome, informative build, Chris.
Because they're from the stock Blazer that we're already on the tree.
@@grb351 I get that but they're incorrect and never should've been included in a full-size, 4wd GM truck kit.
@Earl Hollowell After receiving the kit I see they are different from the stock wagon wheels that were in the Monogram kit. The original wheels were very common in the 70s and were on many 4wd GM, Ford, Dodge and Jeep vehicles.
I believe that is the weight brace for where the front bumper would be tied to the frame by bolts?!
Kinda surprised you didn't go for a Rancho look to your shocks.
Hi Chris, when you paint black on the pink, how long do you wait before you add the next colour?
This is too cool. Wonder if there’s a model kit of a sled for it to pull ??
Outlaw resin makes one
I was looking at that and thinking that there are companies that sell like a scaled down version of flatdeck style semi trailers so I'm thinking I would fairly easily converted into a neat example of the weighted pull sled!!
Absolutely love your builds. I'm a beginner and with each model I try to get better at the hobby. I got one of these sweet kits and I have a 1/24 crawler and I wanna put this bad boy on it, any tips?
You just have to take the rc body off and hold the model body about where it will go so you can mark where the posts go thru the body to attach it to the chassis, I've made a garbage truck , and logging truck crawlers but in 1/10 scale
Weell ACTUALLY it would have a LOL hilarious sounds like a typical comic book nerd good one
Another squarebody Chevy truck model kit this time 4x4 K5 Blazer Mud Puller it similar to the 84 Gmc Desert Truck model kit from few years ago
I have another truck that was a older kit they made a reissue version of one you all may want to track down as much as you like the mobeius bumpside Ford trucks it was the Firestone f150 4x4 i believe it is a 78 it may be a 76, or a 79 anyway it was a ertyl model..
I'm trying to recreate an accurate model of the truck my dad used to own (1973 Chevy Custom/10 fleetside longbed stock with inline 6 engine and 3 on the tree shifter in baby blue inside and out). I don't have the truck to go off of anymore for what it was like. Do you have any good recommendations for books that I could get that would have that kind of information in them along with pictures of the stock engines and bays (hopefully in color) and shots of the undersides that I could use as reference information for when I try to build one up based on a few different models? (Bonus if it has accurate measurements of the truck length, and truck bed, etc. so that I can figure out how to scale that down to match.)
I acquired two of the GMC pickup with snow plow by Revell to start with.
Although I won't be using the snow plow from them, I bought two in case they do not measure up to be long beds in scale and if I might have to lengthen the truck beds, the frame/wheel base/muffler pipes/etc. by chopping them up and adding the two kits together to get the correct lengths.
It was my first thought to do, unless you've got a better recommendation to go with?
I might see about finding someone's spare set of stock side mirrors from that '72 Chevy Wedge model you built up, and the steering wheel too, since those would match and the Revell models don't come with any mirrors that I'm aware of. I bought a 3d printed or resin printed correct '73 front grill and two versions of the inline-6 engine off of ebay. I'll worry about the belts, hoses, wires, battery clamps, hose clamps, other engine components needed, seatbelts, etc. later after more research as to what's missing and what I'll need to add to make it more accurate. I haven't decided if I would paint it up in the way of how I last remember seeing the truck with age, rust, wear, etc. or more like it was back when I was young. I'm still looking for the correct wheels for it but I might have to see about hiring someone to make those custom for me since I don't have a 3d printer nor the knowledge of making parts (yet).
Any info you might suggest, I'd appreciate it! Thank you for sharing your builds, you're really fast and efficient with them, and this one turned out looking great!
So, question for you brother. What's the Mark softer do with the labels?? That's not the same as the label setter they sell?
I keep seeing the glue lid and I want to know what glue are you using exactly HPI? It looks a lot better than what I am stuck with (testors tube glue)
Plastruct Bondene
Testors liquid glue in the pinkish glass bottle works just fine as well, so does Tamiya Extra Thin in the green bottle.
Have you done the amt new release 97 f150 4x4?
What is the brush on glue you’re using??
Plastruct Bondene
Hey Chris I have a 1979 GMC pickup and the engine bay is black, well a very old dirty black but black none the less. so in my opinion a black engine bay is stock. LOL
Is it easier to put parts together than paint I usually paint parts on trees n than assemble
Which both looks completely different from the 82 Chevy k20 Silverado silver brushed aluminum skin glued to the 81-84 ac dash bezel and dash pad panel applique..
What tool are you using at 22:00? And where can I get one?
EDIT: oops... spoke too soon. It's a dental tool. Still... where to buy?
Spare tire mount
Chrome parts should be stripped where glue goes