How crucial is the angle and direction on where the sensor sits? It came with some double-sided velcro pads that are completely unusable sitting where it does in this video but would be really useful to hold it in place while trying to screw the red cover back on. If I rotated the sensor 90 degrees that would work but I guess that screws up the readings?
Hi Elite team. I´m trying to use my turbo muin with Zwift, it recognizes FC belt and cadence but it doesn´t work with the trainer. It finds Elite and the Misuro serial numbers appears, but it takes only 3 or 4 seconds, than it loses signal. Reading comments around youtube I saw many complains about the same problem, they say it happens several times with this trainer.
It could be great if you'd added a short part showing the battery instalation and that for that model you need to press 12 times the botton inside the Misuro + (it's well explained in the instructions anyway)
Honestly, I don’t understand why It is so complicated... I’ve set up the mode 12 and paired with my Garmin 735xt with the wheel sized but I can barely ride over 30km/h while riding hard! Can’t figure out what’s wrong... any help would be much appreciated. Thanks :)
Does the misuro B attach to the housing magnetically when inserted? My Misuro B moves about which can be quite tricky, when installing the red cover. Where exactly is the magnet installed? I have followed all set up procedures, but i cannot install the serial numbers because there are none to chose, when connecting to misuro b to myetraining app on my ipad.
+Ana Roque Misuro B+ is a sensor that uses ANT+ or Bluetooth Smart protocol to transmit: - Speed - Calculated cadence (only for TurboMuin with serial number over 30000) - Calculated Power Every app or device that use ANT+ or Bluetooth Smart can receive from the Misuro B+ the data mentioned before. Of course due to TurboMuin being a pure fluid trainer every app/device will not be able to make an automatic resistance change. The resistance change will always give in relation of the speed of the training
+Ana Roque Misuro B+ uses ANT+ and Bluetooth Smart transmission protocols Every device that use this transmission protocol can be used to be connected to the sensor Please check with the producer what transmission protocol use your device
That says "no data in entry" for a few days, I've changed the battery, paired it multiple times, the my e training app does recognize my ht but NO FUCKING DATA
Well we arent retarded we know how to undo a screw or 2. It would help if it showed how to connect the Sensor to your iPad/iPhone/android device. OK so here goes Misuro B+ just arrived, battery went in OK, fitted inside the housing, at no point has any of the instructions mentioned if I need to use the magnet (C) for my trainer:( am I missing a picture, as (c) is shown on other trainers? Is the magnet built in? at this stage I don't know. The worst part for me is this, originally they sold this with the sensor now they have removed the sensor and charged us extra for the privilege of having to buy it, the same goes for the skewer and the cassette both of which are shown in pictures of the device but not included, very misleading. Also what they don't tell you is that you now have to spend even more money on an extra connection for your phone tablet if it doesn't use Bluetooth smart ass another 25 - 35 don't forget Skewer 10 + Cassette 30 + Misuro upward of 38 seen as high as 68. your looking at around another 200 on top of the purchase price, which is anywhere between 340.00 up as high as 550.00. not to mention the my E training advertised as 9/year but is now 19/ year. They make great machines but when it comes to the finer detail they really do suck and ruin the whole experience. They need someone with a brain to simplify the whole deal. They are so behind with the destruction manual that they suggest you try and find your model by the serial number either 3000 to give you an idea of how far ahead my model is its 59000. Shame as the unit is great but as for all the crap, pathetic. Go to CZcams type turbo training video and get on and cycle with the other peeps and change gear when they say and go flat out when the say for as long as shown on the screen. Great
If it was as simple as in the video. I can't remove the red plastic part because the screws are fixed too strong. Well done, unknown assembly-worker.
Are you serious? Get someone who can use a screwdriver then.
yes correct the screws are cheap and not really a x head
How crucial is the angle and direction on where the sensor sits? It came with some double-sided velcro pads that are completely unusable sitting where it does in this video but would be really useful to hold it in place while trying to screw the red cover back on. If I rotated the sensor 90 degrees that would work but I guess that screws up the readings?
Hi Elite team. I´m trying to use my turbo muin with Zwift, it recognizes FC belt and cadence but it doesn´t work with the trainer. It finds Elite and the Misuro serial numbers appears, but it takes only 3 or 4 seconds, than it loses signal. Reading comments around youtube I saw many complains about the same problem, they say it happens several times with this trainer.
Has anyone tried to hook up the Misuro B+ to this trainer? Haven't got it right yet and really can't find any instructional videos anywhere..
Na super...und was ist mit dem drücken um sich verbinden zu können ?!? Wie oft oder lang muss man drücken und leuchtet diese box dann ?!?! Gruß
It could be great if you'd added a short part showing the battery instalation and that for that model you need to press 12 times the botton inside the Misuro + (it's well explained in the instructions anyway)
+Gonzalo Rodriguez Of course, the video is coming! Thanks for your suggestion!
+Gonzalo Rodriguez Ciao, here is the video you are looking for: czcams.com/video/7KuNrMiD4vE/video.html
so what are you on about?
Honestly, I don’t understand why It is so complicated... I’ve set up the mode 12 and paired with my Garmin 735xt with the wheel sized but I can barely ride over 30km/h while riding hard! Can’t figure out what’s wrong... any help would be much appreciated. Thanks :)
Thx bro !!! I searched for this answer for a long time. Cy
are we supposed to leave the misuro B+ inside the red cover? i have problem when connecting my device(either SmartEtraining or Garmin 520).
Ciao Matteo,
manderesti una mail a real@elite-it.com?
Ti risponderemo al più presto.
Possiamo scriverci in inglese se a te va meglio.
yes
Can you connect the Misuro sensor to Garming edge 520 plus? I want to connect my garmin to a turbo muin trainer. Thanks!
did you get an answer to this??
@@xamymx yep, you can connect it. that won't make it a smart trainer though.
Hello, i got a solenoid with my Muin, but no manual shows how the solenoid have to install. can Anyone help me.
+Dr iPhone Hello, TurboMuin Smart B+ has the magnet already installed by us during production, you don’t need to install any further magnets
Does the misuro B attach to the housing magnetically when inserted? My Misuro B moves about which can be quite tricky, when installing the red cover. Where exactly is the magnet installed? I have followed all set up procedures, but i cannot install the serial numbers because there are none to chose, when connecting to misuro b to myetraining app on my ipad.
That sensor gives me the power, speed and distance?
+Ana Roque Misuro B+ is a sensor that uses ANT+ or Bluetooth Smart protocol to transmit:
- Speed
- Calculated cadence (only for TurboMuin with serial number over 30000)
- Calculated Power
Every app or device that use ANT+ or Bluetooth Smart can receive from the Misuro B+ the data mentioned before.
Of course due to TurboMuin being a pure fluid trainer every app/device will not be able to make an automatic resistance change.
The resistance change will always give in relation of the speed of the training
+Elite How To thanks. And that sensor is compatible to garmin edge 800?
+Ana Roque Misuro B+ uses ANT+ and Bluetooth Smart transmission protocols
Every device that use this transmission protocol can be used to be connected to the sensor
Please check with the producer what transmission protocol use your device
+Elite How To ty :)
That says "no data in entry" for a few days, I've changed the battery, paired it multiple times, the my e training app does recognize my ht but NO FUCKING DATA
I cant believe they charge €19.99/year to use there product! Major letdown
Well we arent retarded we know how to undo a screw or 2. It would help if it showed how to connect the Sensor to your iPad/iPhone/android device. OK so here goes Misuro B+ just arrived, battery went in OK, fitted inside the housing, at no point has any of the instructions mentioned if I need to use the magnet (C) for my trainer:( am I missing a picture, as (c) is shown on other trainers? Is the magnet built in? at this stage I don't know. The worst part for me is this, originally they sold this with the sensor now they have removed the sensor and charged us extra for the privilege of having to buy it, the same goes for the skewer and the cassette both of which are shown in pictures of the device but not included, very misleading. Also what they don't tell you is that you now have to spend even more money on an extra connection for your phone tablet if it doesn't use Bluetooth smart ass another 25 - 35 don't forget Skewer 10 + Cassette 30 + Misuro upward of 38 seen as high as 68. your looking at around another 200 on top of the purchase price, which is anywhere between 340.00 up as high as 550.00. not to mention the my E training advertised as 9/year but is now 19/ year. They make great machines but when it comes to the finer detail they really do suck and ruin the whole experience. They need someone with a brain to simplify the whole deal. They are so behind with the destruction manual that they suggest you try and find your model by the serial number either 3000 to give you an idea of how far ahead my model is its 59000. Shame as the unit is great but as for all the crap, pathetic. Go to CZcams type turbo training video and get on and cycle with the other peeps and change gear when they say and go flat out when the say for as long as shown on the screen. Great