How to Fix "bonnet open" error on Land Rover Discovery 3 hood switch

Sdílet
Vložit
  • čas přidán 26. 08. 2024
  • In this video we look at how to fix the "bonnet open" error on a Land Rover Discovery 3 / LR3 and how to replace the switch.

Komentáře • 44

  • @simpleinverso8628
    @simpleinverso8628 Před 4 lety +3

    You two truly are pair of inventive blokes!
    You've saved me from a giant bill from the dealership.
    Mad thanks from Mexico!

  • @3lowerpark840
    @3lowerpark840 Před 6 lety +3

    Used this today and was very helpful. Took me about 15 mins and saved me paying a garage to do it!!

  • @vandalsavage6152
    @vandalsavage6152 Před 3 lety

    Thank you so much. Tonight, bad neighbourhood, pitch black, can't lock freelander with fob. Torch, piece of copper wire, shorted the plug as you indicated, taped it up to keep water out. Closed bonnet, no fault indicated, licked vehicle with fob. It's guys like you that make the web brilliant..

    • @L663
      @L663  Před 3 lety

      Hope the car was fine in the morning and you had a good nights sleep !

  • @dvarcoe999
    @dvarcoe999 Před 6 lety +1

    Great help. did the cable bridge yesterday . Only took a few minutes. Better than paying my mechanic for labour and another "genuine LR part"

  • @eyley
    @eyley Před 11 měsíci

    Spot on fellas, sorted me right out and now the alarm doesn't keep setting off - cheers!

  • @switchau
    @switchau Před rokem

    Thanks mate, now I can close my Land Rover... and wait 10 days for service ;)

  • @flanaganbrookes7595
    @flanaganbrookes7595 Před rokem

    Did this 2 mins ago took about mins to clean and test worked a treat thanks guys.

  • @bjohnsonsv
    @bjohnsonsv Před 6 lety +1

    Very helpful. Yes, In US, the switch is still on the right side (UK Driver, US Passenger). In my case, the switch is bad (tested with ohm meter, and after cleaning, it works sometimes, but not all the time). I ordered the replacement switch from Atlantic British (~ $40.00).

  • @4183dougs
    @4183dougs Před 10 měsíci

    Thank You 😊 took care of this today thanks to your video. HOPEFULLY...problem solved.

    • @L663
      @L663  Před 9 měsíci

      Excellent !

  • @royboybliss
    @royboybliss Před 10 měsíci

    Thanks. Refreshing style to your video - a voyage of discovery (ha!) rather than some cutesy “I’ve already worked out the answer and this is how I did it” sort of thing. Keep going guys!

  • @AdrianWreyford
    @AdrianWreyford Před 3 lety

    Brilliant. I was looking all over for that switch. After looking at your video it took a few minutes and fixed. Thx

  • @TheBestThingsEver
    @TheBestThingsEver Před 2 lety

    That's twice you've saved me now boys - amazing work !

  • @hardik290485
    @hardik290485 Před 3 lety

    Saved me at least $250 for doing this. Great work

    • @L663
      @L663  Před 3 lety

      Have a nice night out with the money you saved !

  • @rollymp
    @rollymp Před 4 lety +1

    Hi guys... great job as always.... any word yet on a apple car play on my wife’s 2013 Range Rover evoque ... thanks

  • @aspabay
    @aspabay Před rokem

    Thank you for this video. It was quite helpful and I was able to solve the problem with my vehicle.

    • @L663
      @L663  Před rokem

      Great to hear!

  • @triumphspitfire487
    @triumphspitfire487 Před 2 lety

    Perfect! Couldn't lock my car, went out a checked and my sensor had unclipped as well, two second fix to an annoying problem.

  • @234Xperts
    @234Xperts Před 6 lety +2

    I had the same issue with our LR2, did the bridge today and the Problem is now gone....

  • @TheSkiming
    @TheSkiming Před 3 lety

    Thanks for yours videos

  • @hknmhsrler4614
    @hknmhsrler4614 Před 6 lety

    ....god bless you.!!!! Best Sharing! Thank you so much

  • @ajayassani9413
    @ajayassani9413 Před 5 lety

    Hello Great video as ever . Please let me know which cleaner did you use. is it ok to use wd40. Thank you

    • @L663
      @L663  Před 5 lety

      We used the Hols brake cleaner !

    • @ajayassani9413
      @ajayassani9413 Před 5 lety

      Thank you very much for you quick answer.

  • @taemian
    @taemian Před 11 měsíci

    I had this problem, but your fix did not work….BUT when I noticed the corrosion on the u bolt that the latch hooks around, I cleaned it off and now no more warning note!

  • @davidd6118
    @davidd6118 Před 2 lety

    Perfect

  • @mohalbeedh
    @mohalbeedh Před 5 lety

    Thanks 👍

  • @FactsMattersUSA
    @FactsMattersUSA Před 3 měsíci

    Didn't show that it worked because that was the wrong switch you guys were playing with. The actual switch is located in the battery compartment which when closing the boot will collapse the proxy.

  • @WATE001
    @WATE001 Před 5 lety

    Thanks

  • @francishuxley5928
    @francishuxley5928 Před 7 lety

    Awesome, been trying to research this as have the same problem!, no mention of this sensor/switch in the LR3 manuals, naturally! Thanks!!!! Have some other problems:
    [1]Also have a horn which has mostly never worked, except for a couple times it went off as part of the alarm system, with a "chirp". Am thinking, is there a way to reset the alarm system to default??
    [2] A few months after purchase(used, 2007), the instrument cluster became intermittent(no lights, no turn signal sounds,no gauge operation) One test , was the speech function still worked, i.e. the voice responded, of course, there was no corresponding message on the cluster. Am assuming this is a loose conneciton, and disassembling most of the dashboard to get the cluster out to search for the connection problem,....but....possibly this is a known problem with an easier fix???

    • @L663
      @L663  Před 7 lety

      Hi - glad we have helped with the bonnet switch issue.
      The Disco 3 has a separate "siren" for the alarm and another for the horn
      www.ebay.co.uk/itm/Land-Rover-Discovery-3-Range-Rover-Sport-Anti-Theft-Alarm-Siren-YWK500040-/112336941079?fits=Model%3ADiscovery%7CPlat_Gen%3AMK+III&epid=2095192352&hash=item1a27cdb017:g:q9kAAOSw-7RVFDFN
      The horn is easy to change - its just behind the grille.
      I dont think we have done a remove the dash video but it should be similar to the sport see below
      czcams.com/video/0twlR5nXoRU/video.html
      If you get stuck let me know and i will do a video for the Disco 3

    • @MA.MOHEED
      @MA.MOHEED Před 6 lety

      Im cheng tha lock but current not coming in tha cabal

  • @GRIFF22
    @GRIFF22 Před 2 lety

    Can you just leave the switch out?

    • @L663
      @L663  Před 2 lety

      Yes i guess but its so easy to fit a new one... it is a safety device so i would keep it

  • @PaulSampsonAU
    @PaulSampsonAU Před 2 lety

    When you have the switch out of the car it's probably worth doing a continuity check across both pins with the switch closed, to make sure it's working properly.

  • @patriotpioneer
    @patriotpioneer Před 7 lety

    Drivers side U.K. or Drivers Side U.S. ?

    • @L663
      @L663  Před 7 lety +1

      Ah ... good question... of course here in the UK we sit on the RH side of the car ! ( the correct side to drive a car... )
      So yes it will be on the Right Side of the car....

    • @patriotpioneer
      @patriotpioneer Před 7 lety +1

      LOL, Thanks! Now if you guy's would only Speak Proper American English ;-)

  • @otton787
    @otton787 Před 8 měsíci

    Kinda sucks to lose 80% of you potential audience bc you labelled the video only as “bonnet”. If you had also used “hood” in the title you would have 100% audience