Alone Driver Fatigue monitor,Driver fatigue camera work with Mobile DVR, DMS,DSM
Vložit
- čas přidán 26. 07. 2023
- 0:10 1. Wiring
In This part we will point out the wiring connection between the DMS and MDVR8204SH. The instructions here are precise, so users will not find it difficult to connect the devices.
---
1:00 2. Set camera resolution
To set the camera resolution, users need to use the remote to setup the camera. The step-by-step instruction should be followed.
---
01:49 3. set DSM channel
Since the camera is connected to the CH3 of the MDVR (wiring connection video), Users should set the DSM channel using the remote.
---
2:39 4. Set serial port function
Then we must set up the MDVR8204SH Serial function. This step-by-step part will show users on how to properly set the serial function of the device.
---
03:22 5. DSM Alarm demo
This Part, users will see the DSM Demonstration. It shows all the Alarm and how the DSM is properly operating even if the driver is wearing sunglasses.
---
05:54 6. Mobile Phone for Shooting Demo
This is the same as the DSM alarm demo, but we used our mobile phone to shoot. All the precise alarm will also be shown.
---
08:19 7. Carry out alarm queries on the platform
In this part we will show users on how to check the CMSV6 Platform all the driver reports accumulated. - Auta a dopravní prostředky