How to show polish aluminum with Evan's detailing and polishing. Special guest Trainee Nick Wey.
Vložit
- čas přidán 29. 08. 2024
- In honor of Louisville Mats next week I decided it was finally time to release the how I show polish aluminum video. Yes it is a very lengthy video. I'm sorry I couldn't make it any shorter to save time as show polishing takes a ton of time. Mid way through an advanced training course with Nick Wey I knew he was the guy to do the show polishing video with. I have a very distinct process and wanted to prove that even someone new to the polish scene can replicate the process. Now understand he is very talented so that put him at an advantage to pull it off. He showed great pressure use and great at following his overlap and stuck to his pattern. Most at home can use this same exact process and achieve great results.
Now I am not saying this is the only way to achieve a show finish. There are hundreds if not thousands of ways to achieve a perfect shine. I wish the camera showed just how great this shine is. The natural sunlight outside made this look amazing.
But sit back and enjoy the content. There is so much jam packed into this one segment. I hope you all enjoy it.
All of these products are available at www.amazon.com... or by the individual links.
Makita ga7021 amzn.to/2RPDBoo
6,000 rpm
Dewalt D28499X amzn.to/2JZqw9j
6,000 rpm
Makita 9927c amzn.to/2TaKL8n
3500 rpm variable speed
Dewalt dwp849x amzn.to/2qIZ7j9
3500 rpm variable speed
Orbital buffer for paint
15 mm orbital
amzn.to/2VWSM2l
Porter Cable
amzn.to/31saU5d
Inox sander and variable!!! (Game changer)
amzn.to/3vqHpCh
amzn.to/3CqfOVP
Rotary sanding backing pad
amzn.to/3wg8EQl
White cotton towel options
12 x 14 (100 pack) amzn.to/2SHAm3r
12x 12 (24 pack) amzn.to/2C5evLU
Makita 5" da or random orbit
hook and loop amzn.to/2SxCY3r
Extension cords
100' 10 gauge amzn.to/2Sqclko
50' 10 gauge tri tap amzn.to/2t6PHPJ
100' 12 ga amzn.to/2GgOFJJ
50' 12 ga amzn.to/2TA5nXs
20 ton jack
amzn.to/3343V4i
20 ton air jack
amzn.to/2qSNTvJ
20 ton stubby jack for low axles
amzn.to/2PzRc5e
20 ton stubby air jack for low axles
amzn.to/2JA9ShK
Getting clean after polishing.
Suave men’s care 3 in 1
amzn.to/37u6K0r
Lava bar soap
amzn.to/2ZxfZda
Under new law I have to proclaim these links are associate links and I get paid for the sales of these products.
What an awesome video. So much detail explaining all the small steps. Really appreciate you taking the time to explain everything going on. I always ended up leaving hash marks and now I know why. I had the pleasure of talking to you at Amcan. Thank you for taking the time to answer my questions. God Bless you for being such a neat guy. Thank you..!
I truly appreciate your comment and I am happy to hear that you found this video helpful. I enjoy talking with people and helping the improve their techniques. Thank for watching!
Wow. Great video. Nick knocked that out of the park. Your outside explanation of the steps and what was happening during the process were great. Really appreciate the effort you put in these videos.
Thank you. Love that the videos are helpful to others. Nick did a great job!
That’s some good work right there, nice to see color commentary when someone else is polishing. Learned more tips there, great video
Thank you, I was happy to get a chance to film while Nick was here. Happy to hear that you found it helpful.
The job was very, very professional👌, and even better👍, the explanations were incredibly educational😎. Thank you💪👌🙏
Thank you and you are truly welcome.
Thanks for the show. Best wishes young man
Thank you for watching
So tankful to watch your videos 😎Polishing runs in my blood this summer is going to be insane 🙌🏽🙏🏽
Excited for you bud! Thanks for watching and supporting my channel.
Great video! Thank you.
Thanks for watching and taking the time to comment.
Very cool video Evan. 😎
Thanks! 😃
Evan I just got my order in, its raining today but hopefully I'll be able to try it out on my trailer tomorrow! Thanks for posting this as it'll help with my project
Happy to hear that this was helpful to you. Hope everything went smoothly with the trailer.
Very impressive. Great work guys
Thank you
Good job guys! Great video
Thank you!
Awesome video
Thank you
Killer content. Super helpful. I’ve polished some things but a long time ago. Trying to get up on the new wheels and rouges. My main takeaway though is how and what do you look for to know when to reapply rouge?
You will be able to tell when you notice that it is not cutting anymore. Hope this is helpful. Thanks for watching and taking the time to comment.
The differences between a “hash mark and a rouge line” is what?
Rouge line is the black line in front of your buff. Hash marks are the friction scratches left behind by the buffer. Hope this makes sense.
That’s cool
Thank you for watching.
I have a new tractor and trailer, can I use time to shine on them rims?
Nice Thax
Thank you!
What kind of pads do you use in each step?
I’m doing a small old boat, sanded to 600 , using orange buff, brown compound, and after a few sq/ft the aluminum won’t go shiny and just gets smooth black. What can I try to stop this?
What metal polish are you recommending? You didn’t use mineral spirits to clean between compounds.
You don't need to clean between when using these compounds. I use my Time2Shine aluminum polish. Everything can be found at www.goshineon.com.
What to do about tye bunks being in way. What is process do you cover tgem with something to keep from getting messed up.
What's the best Aluminum Alloy to polish... Any corrosion protection after?
The best is in the eye of the beholder. Everyone has their own preference. I make my own called time2shine aluminum polish. It has a lot of wax in it to protect and is easy to use. I use it everyday in my shop. So to me it is the best. But I am biased. LOL Thank you for the great question and for supporting the channel.
I want to do this with my rims on my 300C….is sanding necessary if they already have a polished look
On a chrysler 300 c they are likely chrome. If they are chrome they cannot be polished like this. Be sure you figure out what material they are.
I could use some tips on cutting and polishing stainless
There is a video posted here on that.
Just curious, I just subscribed, do you polish the back of the tanks when they are on the trucks? Or just the front that people see? Thanks in advance, really learning a lot.👍🇨🇦
There is no real point in polishing the backs of tanks on the truck. If we do it is typically for a show truck and those are pulled off for easier access and of course safety reasons. I do not recommended polishing the back of tank while they are still on the truck.
@@EvanStegerMetalPolishing Thanks for the reply, I was sure that you wouldn’t, but you never know what customers might ask ya to do.😂
So, according to what you say, in the video,“If you use less compound, you have less hashmarks“. Right? So if there’s more contact with the wheel that’s doing the work and less compound that’s lubricating the wheel, What is the compound doing? What are “the hashmarks“? This is your learning lesson after two decades of disrespecting me. The term “hashmarks“ is stupid. What you’re talking about is a grade of clarity. This grade of clarity in your video is a number six. Because, there are still lines from the work being done. Number seven is clarity.
Thanks for watching.
Hey evan, i just did my first my first tank, and i have multiple burn lines, do i need to keep on cutting ? Or coloring
studio.czcams.com/users/videoOx8dREeD9Gk/edit
studio.czcams.com/users/videoqg_yu9CAFvc/edit
Try watching these two videos and if you are still having the same issue reach out to sales@goshineon.com and we can discuss it more.
Thanks for watching.
Hello. how many turns 5.00
Why not sand with a 1500 first?
czcams.com/video/E4w0yd7XdfM/video.htmlsi=rLg631zGMvLmv0Af
How long does the shine last?
It is hard to say because you have to take in consideration the conditions in which the aluminum will be in for example, weather, roads, the handling of it. It can last several months or it may need touched up with hand polish more often because of those conditions.
I gotta ask what you mean,or why? in a day or two what does it do?
Cure
That is sex ... brilliant work guys :)
That is metal polishing lol... thank you.
HAY EVAN CAN I HAND POLISH WITH MAYO
I don't recommend it buddy.
HAY EVAN CAN YOU BUFF OUT 320 GRIT
YES BUT IT WILL BE HARD
It's possible, yes.
Just a fyi it’s about to be a blood bath in the trucking industry imo. love the channel though.
Thank you for watching!
holy shit i never realisd how far behid the times this is.
you still palm sand stuff before you start polishing?
i can attain results with a first cut that out shine this using rotary tools.
lol its kinda funny listening to the terminology. 400- 600 has notjing to do with color or brightness. the SHOW BROWN and regular brown is funny. if chrome platers could see this it would be comedy.
Happy to amuse. Thanks for watching.
Talking sand paper grit…
you should be able to cut with a white bar almost and be able to 2 step when rotary sanding proper the absolutel dept and clarity is absoltely not comparable at all.
palm sanding ruins the survace making it much much hardet to obtain true mirror finishes.
Why don’t you guys just cross cut
I have uploaded a few shorts from Mayberry. Will get more posted
HAY EVAN CAN WE CHAT TONIGHT
Sorry I missed it.
The number between six and seven is the laziness of this generation. In the old generation, there was no distinction between the two because there was no laziness, so get it right! Get back to me in 20 years.
Thanks for watching and taking the time to comment.
He’s going too fast! You have hashmarks! You have hashmarks on your finished product too!
Thanks for watching.
I’ll see if you have hashmarks after Two more decades. And we’ll see where you’re at in life.
Thank you for watching and taking the time to comment.