Honda Accord Rear Wheel Bearing Replacement (2013-2017)

2013-2017 Honda Accord Wheel Bearing replacement
--------------------------------------------------------------------
TWITCH : / manizilla
SNAP-CHAT : / manizilla
INSTAGRAM : / manizillatoolbox
--------------------------------------------------------------------
Disclaimer :
Creator 'ManiZilla' is a trained professional in his craft and works with his own safety in mind; as should any viewer.
--------------------------------------------------------------------
Don't Mind me just dropping some tags
↓
#Auto #Cars #ZillaSquad

[@bdubbin16]

Thanks this was useful! A few tips for others: 1) the brake guard can be undone so you can rotate it around the wheel bearing assembly and then be able to hit the wheel bearing from multiple sides instead of just one as shown in the video. 2) with a 10mm socket you can take out the ABS sensor from the top so you don't have to worry about damaging it. 3) I didn't need a flexible wratchet ... a solid one did the job.

[@swaggerjacker1482]

What makes a wheel bearing go bad?

[@G3RRYxC]

​@@swaggerjacker1482I think just wear over time/use. (Probably wears faster in wet climates?)

[@swaggerjacker1482]

@@G3RRYxCmakes sense

[@joet4806]

Excellent Leadership & Teaching Skills! Direct and to the point. Thank you

[@scottl072]

Thanks for keeping your video so clear and to-the-point.

[@bobbymathis1700]

Excellent tutorial and video editing! Well done and thank you.

[@DAlilbigman]

Nice video Manny! Thanks for sharing. Wifey is hearing a humming noise from the rear passenger side of our 2015 Accord. It only hums at 50 mph. Had the new tires checked and all was good. No holes in the muffler s my guess it’s the wheel bearings.

[@jasonoid-official]

Got the same problem on my 2014 rear driver bearing.... I caught it before it got this bad though. Thanks for the video.

[@cristianmaradiagaseren7507]

Great vid. could you share the part number?

[@johnregal5098]

Fantastic vid. Thank you so much for doing this.

[@davidhollfelder9940]

Parking brake cable won’t let you pull the caliper. You left that part out.

[@4Runner21]

Any torque specs? Or is good and tight good enough? Is this same or similar for 13 Acura RDX? Thank you!

[@goofyGAguy]

72 foot-lbs.

[@RavRam15]

Good job Manny! 👊🏾👌🏾👍🏾

[@ManiiZilla]

🙏🏽 thank you

[@bobbysmith9803]

Well done video and very clear looks like 12k quality

[@tonyfeldscher2209]

Will the wheel bearing not make noise when going in reverse? My accord makes the noise when going forward only. Happened after I replaced stuck rear caliper.

[@chstewart3715]

I'm not doubting the HUB was bad, but loosening the tire then shaking it was kind of redundant

[@ScareLegionOfficialStudios]

i was going to comment that but regardless it was going out anyways

[@falecf4]

"Nice and tight" being 80 ft-lbs for the hub bolts and lug nuts.

[@cool124]

Hi,
How long does this generally take?

[@detect2protect]

what do you use for the spray penetrating oil?

[@kenjones2874]

Great video!! Nice music too.

[@raminderparwaga]

Sick video!

[@ManiiZilla]

Respect brother 🙏🏽

[@Awake2Evil]

What are the sizes of the socket you need

[@cyreese3720]

Do you know if it's the same process for a 2018?

[@ShiftyReaperGaming]

Most likely been like this for years fronts are pressed in rear is bolted in like this one nothings ever changed due to it being Front wheel drive if it’s all wheel drives will be different

[@zaneyone1]

Tapping the bearing assembly out evenly will make it come out easier than beating it out on one side as you did. Otherwise, good video.

[@techieguy336]

There's only a small section which can be accessed with a hammer. How would you tap it evenly?

[@shamzpachino4778]

I followed this video and the only thing I did different was remove the “brake shield” so I can bang from more sides. It was the little 10mm screws.

[@1Challino]

Thanks!!!

[@jjspatel]

What is the cost of one wheel bearing of this model?

[@nevelis]

Probably about $50

[@Ez-sk8ig]

Buy quality parts and do the job one time. Skf, Timken, ACDelco, even Moog is better than the cheap ones or no name. I always check the warranty time to see. Timken will usually be lifetime, but they are also the most expensive.

[@dannysautorepair]

Great video thanks

[@king_ton6069]

Is it the same with a accord 2009 ?

[@devonteparks614]

Hey what is that thing your using to tap it im stick currently trying get mines off?

[@ManiiZilla]

I use a punch with a hammer
If yours is really badly seized you may need to use a torch to heat it up and then try to hit it

[@joela6895]

get a slide hammer. theres youtube vids on it. i spent 2 days trying to get mine off with a hammer and flat screw driver. i used the slide hammer and it took me 2 mins. fuuuuuucccckk

[@owenmorris8266]

link to the hub assembly?

[@mohammedsayyde]

Which brand?

[@BeenLogic]

For the 2016 model sport do I have to worry about a abs sensor for the same drivers rear wheel ??

[@inibrasiumthefirst2680]

probably. abs sensors arnt bad just carefully remove them. also some times they get stuck and they break so its always better to be prepared to replace it

[@DymondReed]

what type of drill is that?

[@roxiewatters1161]

It looks like a DeWalt high torque impact wrench

[@Ez-sk8ig]

Milwaukee

[@itsyanielxo]

What are the bolt torque specs for mounting the hub?

[@samlenderman]

72 ft-lbs per Haynes

[@TheHonda6211]

What are the torque specs?

[@samlenderman]

72 ft-lbs per Haynes

[@PedroRodriguez-hy5ty]

Wears your slide hammer