DIY RZR S or XP 1000 7 Button Ride Command Installation
Vložit
- čas přidán 9. 03. 2021
- This is a DIY install of the Polaris Ride Command System into my 2020 RZR S4 1000. My machine did not have the option for ride command, after speaking with friends and searching for the correct part numbers I was able to put this together!! Below is the parts list, as well if you have any questions please leave me a comment below and id be happy to answer it!!
FAQ-
- Cost of this depends on where you source parts from and what kind of deal you can get, I purchased everything new from my local dealership and am in it about $1700 for this. But i know it can be done for less.
- The part 2884021 will show as a “mount kit” as the description, this is actually the full wiring harness, sat antenna, cameras, fasteners, and am/fm antenna, as well as the mounting bracket and plastic trim pieces that you will not use. Polaris just does a bad job describing what the actual “mount kit” contains.
Parts List:
Ride Command Dash Panel- 2637724-070
Ride Command Head Unit- 3280922
Ride Command Install Kit- 2884021 - Auta a dopravní prostředky
As expected another great modification that I will be doing to my 2020 RZR that I really wanted on my S model. Thank you sir. Great video!!
Thank you!
I'm about to do this to my 2020 s 1000
Great video! Made my install easy and quick on a 17 900s4. Took me about 5 hours. I got an older 7 button display (part # 3280899) on eBay for $400 so the total cost for me with the other parts was about $900. Well worth that price. Also, saw back orders for the dash part saying at least a month and a half out. Mine took a week and a half. The harness took a few days longer than that. Thx for the help!
Awesome!! Glad you made the switch, it definitely is worth it!
hi, would this work on a 2016 turbo xp? Anywhere I can see pics?
Great video. Attention to detail is helpful.
Awesome video and guide, I did the same swap on my 18 1000 XP last summer. We have almost the exact same mods, front end swap with fang lights, 7 button ride command, and I have everything to retrofit a cluster gauge, just haven't got it in yet.
Do you have pictures.
what wiring harnesses did you use. i’m trying to do the same with my 18 1000 4, but can’t manage to find parts
@@eduardosalazar3940 You need all the parts he listed in the video description
@@trandall is it going to be the same on the 2018 model vs what he did ?
@@kcranch2697 Yes, they are the same
Love the videos awesome job.
Thank you for the support! Appreciate it!
Nice job. I did the same install on my 2017 xp1000. But I used a 5 button dash piece and cut out the holes to fit the 7 button. I was able to use the factory mount but you can see where I cut into the plastic. I might change mine to the way you did yours if the cosmetic issue bothers me. Thanks for the great video.
I’m wanting to do the same on my 2017 xp4. Did you use the same harness as in this video? Just wondering where it gets all the cluster data, maybe the dlc connector?
Thanks for the vid
Great Video! Helped me out with my install. Did you end up adding an amp and speakers? I have door speakers id like to connect the factory amp and wiring if possible. Do you have any helpful tips with doing this? Thanks.
Hi, I have a 2015 1000 xp4 . It already has the gps on it. The screen is smaller though , I would like to get the bigger screen . I wonder if I just need the dash and the screen without all the wiring?
Did the new gauges pick up the original miles and hours?
This is awesome ive been wanting to do these 3 upgrages for my 2017 rzr xp 1000 4
I would really like to know how much all this cost you ..
Hello,
Is this installation fits with my RZR 2016 1000XP ?
If yes, is it possible to plug an audio system (MTX AUDIO or MB QUART) to the 7 buttons screen command ride ?
If yes, is there any special accesories to plug the audio system to the screen?
Many thanks !
Shawn,
Question for you. I already did the judge cluster swap.
I too would like to add the 7 button ride command. The only feature I intend to use it the GPS itself.
Do you know which harness connector supplies power tot he unit? I’m hoping to purchase just the single connector instead of the entire harness just to provide power. Not sure if it’s in the 16pin or the 32pin.
Thanks
Did you ever consider installing a oem steering wheel with oem buttons?
I would assume that this process and parts would work for a 2019 S 1000 S
Do you have the part number for just the harness? And if possible where did you get it from?...
Need the wiring the same as the one you have on your video
Can I use any ride command head unit or just that part number? Can it be used or new? nothing do with the miles or odometer as that’s in the cluster? Going to do the Custer retrofit as well. Great videos.
You can use any 7 button ride command unit.
Awesome video. Did you have to rewire the 32 pin connector with the oem 16 pin connector?
Nope, it was all plug and play
Good video.
Question, I have a 2016 xpt, will the dash for that year? The dash looks like it has all the same mounting points as your 2020.
Yes, you have the same dash making it a direct swap with the same mounting points!
Where can i find the wiring harness for the screen
Well done videos, very informative. I have the same year 2 seat model of your S 1000. Question re the upper dash panel you installed. Your panel has 7 cut out holes at the bottom for the display's buttons. If I use your part number, will I receive the dash panel with the 7 bottom cutouts? All the pictures on line do not show cutouts for the 7 button display. Maybe the pics are generic??
Yes, if you order the part #’s on my video it will get you the 7 button dash piece!
@@CollaGoUnLTD Thank you for the quick reply and the info!!!
I’m installing ride command into my 2018 xpt 1000. Quick question, what do I do with the old 16pin plug that was plugged into the old Speedo? I saw one video where he removed pins from old and installed into new 32 but he took yellow number one of old and put it into #29 slot of new 32 by my new 32 already has a wire in that slot.
Do I just tape up old 16 pin plug and zip tie it out of the way?
I extended the wires and ran it to my Speedo gauge cluster.
What is the part number for just the harness brotha?
Will this work for a 17 turbo or is the dash frame different and it just plugs in to The diagnostic plug. The dash and ride command is on back order but I ordered everything else.
As long as your dash has the stock circle analog gauge in it, the ride command frame will work.
Can you do a 2020 turbo s tail light fascia swap
Was wondering if you could help me out. I am trying to purchase the ride command for my 2020 Polaris rzr 1000s. I have opportunity to purchase the head unit the serial numbers are a little different but they told me it's the newer version 3286917. Was wondering if you could help me locate a wiring harness or let me know where you purchased your items for your razor. Let me know if you can help. Thanks
Where did you find the dash? I have been looking and i can not find one. According to polaris they stopped making the dash.
Try this link www.partzilla.com/product/polaris/2637724-070?ref=d84d46bb531b7037073b4d38bf71d0a41581a6cc
Will this set up fit my 2017 rzr 1000 xp. 2 seater Will any wiring have to be done or will it just plug on as yours did.
It will be plug and play!
Can you confirm the dash panel number cause what I am seeing that is the top panel and not the dash to where the ride command would fit? Where did you purchase your from?
That is the correct part number. 2637724-070
How much u charge to do this swap??
does this and the steering wheel work on the 2017 Polaris Rzr 900 (2 Door)
Yep
Is there a modification to add the 2020 rear end?
Unfortunately not that I’ve seen for the S models as our bed and everything is drastically different than an XP. But I’m sure someone will probably do it in the future!
Hey are you still active on here? Iam having a problem my screen won’t get a signal. Any ideas?
How did you manage to wire the cluster and the ride command to be working at the same time?
The existing RZR harness gets plugged into the gauge cluster, and the new ride command harness plugs into the ride command itself. Check out the other gauge cluster install video and then watch the ride command video it will explain it better.
@@CollaGoUnLTD can you send me the videos for the 2020 cluster and ride command install and part numbers
How did you connect your cluster to the ride command, is there a splitter wiring?
The ride command has its own harness that plugs into the diagnostic port plug, the gauge cluster utilizes the plug that normally runs to the round cluster in the center of the dash.
@@CollaGoUnLTD thanks for the Quick response, awesome video
What is the person to person antenna you are referring to do you have a part number?
It’s the Vehicle to Vehicle antenna rzr.polaris.com/en-us/shop/accessories/audio-technology/2884449/
@@CollaGoUnLTD hey bud, im about to get everything order to do this install. I have the exact machine as you, just the 2 seater version. My question is, was there ever a bracket that worked with the dash and the head unit? Why do we have to make a bracket? Was the bracket discontinued or something?
@@kevinsnyder333 There was a bracket for the fox edition, but has been discontinued for a while. Which is why there is a need to fabricate your own.
@@CollaGoUnLTD ok gotcha. I have no problem making my own just was seeing why. My dealer got my dash in today. Just need the headunit and install kit. Is yours still working good? Anything else I need to order or know about not mentioned in your video? Thanks again for your video.
@@kevinsnyder333 awesome! Mine is still working perfect!
If your planning on installing a ride command compatible stereo system like kicker , or Rockford fosgate do you also need to purchase a separate audio adapter ?
It comes with audio adapters in the wiring harness kit but I am not for sure on if they will work for your application or if they only work with Polaris’s audio setup.
I used to live in GJ. 😃
Is this a possible conversion on a 2015 900s
Yep it sure is!
Is that the correct number for the dash? I have the 5 button dash that I had to cut the dividers. I would like to buy this 7 button dash. I didnt know they made that. Please confirm the part number so that I can order ASAP. thanks
Yes that is the correct part number
@@CollaGoUnLTD Thats crazy it came on a rzr 900 and that dash will fit on 2017 rzr turbo 1000? Same size?
Well this work on 2015 xp 1000?
Yes it should
Well, I wanted to start ordering these parts amd the dash is on backorder dangit. I have the same rzr as you just a 2 seater.
Bummer! Hope they come back into stock soon!
I ordered the dash today. Says early January arrival so that probably means July haha. So what was this dash actually meant for? Since you have to make a bracket for the ride command?
The dash was meant for the Fox Edition RZR. But you can’t get any other parts for it because it was discontinued. Which is why I had to fabricate the mounting bracket for it.
@@CollaGoUnLTD gotcha. Well man I really appreciate you taking the time to make this video. I hate our stock gauge.
Will this work on my 2018 Polaris Rzr xp 1000 4 seater?
Yes it should!