💎 How To Scan 𝐄𝐮𝐭𝐞𝐥𝐬𝐚𝐭 𝟏𝟔𝐀 16°East | French Channels | Master Decoder | Pbteck

How To Scan 𝐄𝐮𝐭𝐞𝐥𝐬𝐚𝐭 𝟏𝟔𝐀 16°East | French Channels | Master Decoder
To scan for French channels on Eutelsat 16A (16° East) using a Master Decoder, follow these detailed steps. Ensure you have a satellite dish properly aligned to Eutelsat 16A. Here's a step-by-step guide:
Step-by-Step Guide
1. **Connect the Satellite Dish**: Ensure your satellite dish is correctly aligned to Eutelsat 16A at 16° East and connected to the LNB input on your Master Decoder.
2. **Power On the Devices**: Turn on both your TV and Master Decoder.
3. **Access the Menu**: Using the remote control, press the "Menu" button to access the main menu.
4. **Navigate to Installation or Setup**:
- Look for an option labeled "Installation," "Setup," "Antenna Setup," or similar.
5. **Select Satellite Configuration**:
- Choose "Satellite Setup," "Satellite Configuration," or "Satellite Installation."
- Select "Eutelsat 16A (16°E)" from the list of satellites. If it's not listed, you may need to add it manually using the satellite's position details (16.0° East).
6. **Set LNB Type and Frequency**:
- Ensure the LNB type is set correctly (usually Universal for most setups).
- Check and input the correct LNB frequency (e.g., 9750/10600 MHz for Universal LNB).
7. **Transponder List**:
- Access the transponder list to ensure you have the correct transponders for French channels.
- You may need to manually input transponder frequencies if they are not pre-listed. For example:
- Frequency: 12545 MHz
- Polarization: Horizontal (H)
- Symbol Rate: 30000 kS/s
- FEC: 3/4
8. **Scan Channels**:
- Choose "Blind Scan" or "Automatic Scan" to allow the decoder to find all available channels on Eutelsat 16A.
- If you prefer to scan specific transponders, use "Manual Scan" and input the frequency, symbol rate, and other parameters.
9. **Start the Scan**:
- Initiate the scan and wait for the decoder to search and list available channels.
- This process can take several minutes. Ensure not to interrupt the scanning process.
10. **Save Channels**:
- Once the scan is complete, the decoder should save the found channels automatically.
- If prompted, confirm and save the channel list.
11. **Verify Channels**:
- Navigate through the saved channels to ensure the French channels are correctly listed and accessible.
Additional Tips
- **Firmware Updates**: Ensure your Master Decoder firmware is up-to-date to avoid any issues with channel scanning and compatibility.
- **Signal Quality**: Make sure the dish alignment provides optimal signal strength and quality for Eutelsat 16A.
- **Manual Configuration**: If the automatic scan does not yield results, you might need to manually add and scan specific transponders known to carry French channels.
Example Transponders for Eutelsat 16A (16° East)
Here are some transponders you might use for manual scanning to find French channels:
- *Frequency:* 12543 MHz
- *Polarization:* Horizontal (H)
- *Symbol Rate:* 30000 kS/s
- *FEC:* 3/4
- *Frequency:* 12603 MHz
- *Polarization:* Horizontal (H)
- *Symbol Rate:* 30000 kS/s
- *FEC:* 3/4
- *Frequency:* 12647 MHz
- *Polarization:* Vertical (V)
- *Symbol Rate:* 30000 kS/s
- *FEC:* 3/4
For the most accurate and up-to-date transponder information, you might want to consult the Eutelsat website or a reliable satellite frequency database.
Following these steps should help you successfully scan and access French channels on Eutelsat 16A using your Master Decoder.
__________________________________
LINKS
WEBSITE:
www.pbteck.com
INSTAGRAM;
/ pbtecknology
FACEBOOK;
/ pbtecknology
TWITTER
/ pbtecknology
TELEGRAM:
t.me/pbtecknology
#pbteckinfo #lnb #gotvinstallation #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteck #pbtecknology #canalsat #canal+ #freefire

[@pbteckinfo]

I hope this video has helped you to solve your problem. Comment below your thoughts or whatever you misunderstood. Help this channel to grow by hitting LIKE, SUBSCRIBE and SHARE button. Thanks For Watching...

[@pbteckinfo]

[@adelaidebiney3227]

Pls I did it, but it showed 80% signal strength and 0% signal quality