How To Scan Startimes SES 05 5.0E Channels | Master Combo Decoder
To scan and configure channels for Startimes SES 05 5.0E on a Master Combo decoder, follow these steps:
### Step-by-Step Guide:
1. **Turn on the Decoder and TV:**
- Ensure your Master Combo decoder and TV are both powered on and properly connected.
2. **Access the Menu:**
- Use the remote control to navigate to the "Menu" option on your TV screen.
3. **Select Installation:**
- In the menu, locate and select the "Installation" or "Setup" option. This is typically where you can manage channel searches and satellite settings.
4. **Choose Satellite:**
- Select the option to configure satellites. Look for the satellite list and select SES 05 5.0E. If it's not listed, you may need to add it manually.
5. **Add New Satellite (if needed):**
- To add a new satellite, select the "Add Satellite" option and input the necessary parameters for SES 05 5.0E:
- **Satellite Name:** SES 05 5.0E
- **Position:** 5.0E (East)
6. **Input LNB Settings:**
- Set the LNB type to Universal or the specific type used by your satellite dish.
- Ensure the LNB frequency is correct (typically 9750/10600 for Universal LNBs).
7. **Enter Frequency and Other Parameters:**
- **Frequency:** Enter the specific transponder frequency used by Startimes on SES 05 5.0E.
- **Symbol Rate:** Enter the symbol rate.
- **Polarization:** Set the correct polarization (Horizontal or Vertical).
8. **Start Scanning:**
- Once all parameters are correctly set, select the option to "Scan" or "Search" for channels.
- Choose whether to perform a Blind Scan, Network Scan, or Manual Scan based on the available options. A Blind Scan is recommended as it will find all available channels on the satellite.
9. **Save Channels:**
- After the scan is complete, save the found channels. This usually happens automatically, but make sure to confirm if prompted.
10. **Exit Menu:**
- Exit the menu and return to the main TV screen to start watching the newly scanned channels.
### Additional Tips:
- **Firmware Update:** Ensure your decoder’s firmware is up to date for the best compatibility and performance.
- **Signal Strength:** Check and adjust the satellite dish alignment to maximize signal strength and quality.
- **Consult Manual:** Refer to the Master Combo decoder’s user manual for specific instructions and troubleshooting tips.
Following these steps should help you successfully scan and configure Startimes SES 05 5.0E channels on your Master Combo decoder.
__________________________________
LINKS
WEBSITE:
www.pbteck.com
INSTAGRAM;
pbtecknology
FACEBOOK;
pbtecknology
TWITTER
Pbtecknology
TELEGRAM:
t.me/pbtecknology
#pbteckinfo #lnb #gotvinstallation #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteck #pbtecknology #canalsat #canal+ #freefire