HONDA HORNET CB600F Honda 599 OIL CHANGE [MADE EASY !] By THE OLD MECHANIC.
Vložit
- čas přidán 26. 08. 2024
- Do your own oil change maintenance on your Honda Hornet 600 Honda 599
The Old Mechanic shows you how easy that is !!
YOU can DO that TOO. Its SOO easy if you know how to change the oil of your own HONDA HORNET CB600F 2010, and I show you HOW TO SAVE A LOT OF MONEY !
HERE ARE SOME PARTS:
CASTROL POWER-RS 10W40 4L: amzn.to/3WCoArs
Oilfilter HF204 amzn.to/3XxdqVf
Oil Filter Removal Tool Aluminum: amzn.to/3w8NNyo
copper washer set: amzn.to/3kmh8D7
As an Amazon Associate, I earn a small percentage from qualifying purchases.
You are also helping my CZcams channel to be able to make more of these video's.
If you want to see more of my maintenance on this Honda Hornet CLICK BELOW
• Honda Hornet CB600F 20...
Motorcycle maintenance Made Easy By: The Old Mechanic.
THANKS For WATCHING!
Don't forget to SUBSCRIBE LIKE and SHARE this video with your all your friends on FaceBook please.
#TheOldMechanic #motorcyclemaintenance #HondaCB600F
![Honda CB600F Hornet 2010 Sparkplug Change Easy...? [-PART 2-]](/img/n.gif)
Hi, I recently purchased a Hornet and I like to service it myself. Your videos have been a great help to me, thank you very much.
Hello Javier, thank you for your comment ! Greets The Old Mechanic
You're a very "by the book" mechanic which is great for instructional videos. Thank you for taking the time to make these videos, +1 for Castrol being the best oil. I use the Edge high mileage in my J37 to slow down the oil burning and it works great better than when i use to use Amsoil Signature Series engine.
Thanks Justin 👍🏻👊🏻🏍
Thanks, i bought a Hornet 2 monts ago and your videos help me alot 👍👍
Groetjes van je zuiderburen, deze serie is geweldig, heel droog, to the point - top! Ikzelf heb een CB500 ;) Oerdegelijk die Honda's
Hallo, Ik heb zelf meerdere Honda's gehad en die hebben het altijd goed gedaan. Op 1 na een CB750F2 (nieuw gekocht in uhhh 1975 ofzo) die liep tijdens een vakantie in zuid Frankrijk volledig in de soep. Bleek een afgebroken klep te zijn, die hamerde in een paar seconde een gat in de zuiger. De motor had pas 30.000 km gelopen en had destijds maar een half jaar garantie (!). Je kan het maar treffen he ;-) Groetjes van The Old Mechanic.
====
Hi, I have owned several Hondas myself and they have always performed well. Except for a CB750F2 (bought new in uhhh 1975 or something) that ran completely into the soup during a holiday in the south of France. Turned out to be a broken valve, which hammered a hole in the piston in a few seconds. The engine had only run 30,000 km and at the time only had a six-month warranty (!). You can only hit it ;-) Greetings from The Old Mechanic.
You can unscrew the filter and screw it on with your hand without any problems, preferably in a rubber glove
Hi Jan, perhaps you are right, if you are The hulk.. But I am not..lolll So I just use the tools for it, and you need the tool anyway to torque the oilfilter to 26 Nm
Thank you for all your videos.
Helped me very much in learning how to repair my pc41.
Thank you very mutch, this vidros is awesome 👍👍 please more video about hornet. Thank you, greetings from Slovakia.
Hi Radim, thanks for your kind comment !! When I get this bike again I will sure make new video's for all my friends. Greetz from The Old Mechanic. 🏍 👨🔧
@@TheOldMechanic Thank you old mechanic, wish all good from Slovakia 🐝👍
Thanks for review ..can you show howe to change coolant on this model , thanks..
Unfortunatly I am allready busy on a new hobby project. The next time I will do make a video about a coolant change as a lot of people asked me to do that.. Greets from The Old Mechanic
Thanks For sharing mate i own a bike like Yours mine it's the Black Edition.👍
Bless You.
Nice..tanks for the video with hornet....pls put video with cooling liquid system change.....tanks....i have a hornet cb600f 2010....and i like your video ....
Hi Radu Thanks for your reply, For this bike a cooling liquid change is still on my list. My next video is about changing the sparkplugs. I hope that you are going to like to watch that too. Greets from The Netherlands.
Dzieka ✌️
Great job keep going
Thanks Badr, I will. Greetz from The Old Mechanic.
Como reparar las barras de suspensión dañadas gracias 🙏😁😜
change the oil every how many km? 5000?
Hello Friend id Does not need to Fill the filter with some oil before installing?
Cheers thks for sharing
Hello sir , what will happen if I bot extra oil little bit thanks .
Nice video,
How long does the oil in the bottle last?
I have one from ~2019 (still sealed), can I still use it?
No problem 😉
Hi there, i have PC41 from 2008. I found on the web some specifications where is written that the oil is a 10W-30 and i'm preparing to put that viscosity. What do you think about that? Thanks!
I can phantom smell it
you do not heat the motorcycle before changing the oil so that it flew better?
Hi Jan, if you are in a hurry, then thats the way to go. But if you got plenty of time to allow the oil to drip out then you can drain the oil while its cold, because it will flow to the lowest part of the engine anyway.
Hello! Can You say more about using kill switch? Why in some motorcycles is important to shut down the motorbike by the key and is it necessary to do it in Hornet PC41?
Kill switch is same as key - don't matter how you turn the engine off, providing it's not in mid-air! Don't matter whether you use red switch or key.
Waar haal je die ringetjes voor schroef van de olie
Hoi ik zoek die online, maar uiteraard verkoopt de dealer die ook 😉👍🏻👊🏻🏍
@@TheOldMechanic oke Dankje. Weet je ook toevallig welke maat ? Hoeveel mm en moet er echt een nieuwe op ? Zie vaak mensen die maken hem goed schoon en gebruiken hem weer
Will the maxilum oil level be the same when you take the bike off its stand having both wheels on ground?
on the motorstand the bike leans a tiny bit to the front, so thats also visable in the oil glass. But you have to be aware of that when filling the oil.
Greets from: The Old Mechanic
@@TheOldMechanic thanks for the comment
@@bencrosbie Your welcome and don't forget to subribe to my channel ;-)
Sorry - only hand tighten =- 1/2 turn or so BY HAND after it gets tight. Also, what about oiling the new filter o'ring? MC Garage/Yuri(sp?) is a far better explainer. Sorry.
what size is the oil plug? M12? M14? thanks
Hello Hal, the oil plug is M12 x 1,5
@@TheOldMechanic thanks!
@@ImNotADeeJay your welcome
with original hornet exhaust it sounds like a scooter ;D
Hello, have you any other recommended oil? In my country i cannoy buy RS fully synthetic version, i can order it but is expensive as hell. I'm curious about your opinion for Motul 7100 full synthetic 10w40 or Motul 300V full synthetic 10w40?
Greetz from Poland
Hi Inetpub, I personaly NEVER use full synthetic oil, because the chance could be that your clutch plates might become simply to slippery. And there is a chance they got burned. The Castrol I have been using now for years is the Power RS 10W40 and thats according to Castrol with synthetic components in the oil. So the best of both worlds.
@@TheOldMechanic thank you for answer! Saddly i cannot find that oil in my country auctions, the only i see its Castrol Power 1 10w40 4T semi synthetic, which i belive is way different oil than Power RS. So now i am considering Castrol Power 1 10w40 4t or Motul 5100 10w40 which is also semi synthetic but theres so many fake motuls on our market that i think i would buy castrol at the end. Hiflo filter of course and a copper washer :)
@@MrILovePoland Hello Castrol Power 1 10w40 is the same oil as the Power RS. Castrol often use different names for different countries. So I would go for the Power 1, with the Hiflo filter ! I can't command on the Motul oil because I have no expirience with that brand.
@@TheOldMechanic so ill buy it, thanks for your reply and cant wait new videos :) hard to find such valuable content these days
@@MrILovePoland jak kupisz w intercars itp albo znanym sklepie motocyklowym to raczej fejka nie dostaniesz ;)
How much oil you use with filter?
The manual say 3.9 Liter, but when you let the bike drain for a day orso you can add 4 liters. I never count the amount, I fill it up watching that oil glass. Till its at the right height.
@@TheOldMechanic but manual says 2.8 with filter
@@ali.zafar171 Hi Ali, YOU are so right, I made a terrible typo..(stupid me..!) The manual says 2.9 Liter !! SORRY !! I allready changed that in my comment .
Thank you so much for your videos! SO helpful. What is the name of the attachment you use in minute 9:25? i have the oli filter remover but i need to buy to torque attachment and i can't find it anywhere. Thank you!!!!
Hi GianMatteo, its a torque wrench from the brand TengTools and the range is 19 - 110 Nm
@@TheOldMechanic Thank you for your reply, i have a torque wrench but i dont have the specific extension to attach to the oil filter remover because it has a square hole........
@@gianmatteomannering4521 ahh thats called an extension bar. I use the 3/8 inch
You can buy them is several lenghts, and sizes. Here you can see them:
www.liveabout.com/auto-repair-tools-ratchet-extensions-281837
That’s a yellow crayon (usually wax)
Hello Gareth, Thanks for your comment and for subscribing to my channel !