How to lift a Ford Bronco Sport 1.5 inches with the HRG Offroad lift kit
Vložit
- čas přidán 2. 12. 2021
- Bronco Sport lift kits: hrgoffroad.com/product/1-5-in...
In this video, I show a step by step installation of the HRG Offroad 1.5 inch lift kit on a 2021 Ford Bronco Sport Big Bend. The installation took about 2.5 hours and came out great! This procedure is exactly the same for the Badlands and First Edition models.
Time stamps:
1:00 front strut removal
3:52 attaching spacer to front strut
6:00 re-installing front strut
8:30 installing camber bolt
9:45 installing brake line spacer
12:00 rear spring removal
13:23 installing rear spring spacer
15:00 installing trailing arm spacers
17:45 walkaround after the lift
18:17 Finished Lifted Bronco Sport with 245/65/17 BFGoodrich KO2 tires
Find us on Facebook
/ hrgoffroad
Instagram @hrgoffroad
Please like, share and subscribe for more great content!
Want to send us something?
HRG Offroad
223 Rolling Hill Rd
Mooresville, NC 28117 - Auta a dopravní prostředky
I like the way you are explaining ever single step with normal ever day English and also that if you make a mistake you say it. Thank you for making videos for regular DIY guys.
Wow end result looks amazing! The lift and those rugged tires are so sharp. I want one!
That is the way to do a video!!! You show the challenges, keep a good humorous attitude. Fine job, I will buy your kit.
I have the badlands and love it a lot, with all options. I don’t care about the fuel. It tow my enclosed 4x6 full very easily and still accelerate like a sport car with the trailer. Smile. On highway during my 3500km trip i averaged 9l/100km. In city i can use the eco mode from time to time but most of the time i am in normal mode. I like having all the options and the color orange cyber is very nice. I also installed a brake controller and 7 pin plug. We had to cut a bit the back plastic to put the rounded 7 pin and i have a converter to 4 pins. Controller is installed just above the brake on the dash. I installed a loadwarrior roof rack. I got a lot of compliments. People come to me to said the Bronco is very nice.
Nice job.
Fantastic now I can take mine
Nice!!!
Thanks 🙏🏽
Looking to save some money by trading my ram 1500 rn and I’ve only seen outerbank videos so it’s nice to see the smaller engine type moded. I don’t off-road as much as I use to so a good in between is what I’m looking for and this might be it.
I would have to wonder about suspension component wear in 40-50,000 miles. Nice video.
I’m wondering how the larger tires will impact the fuel economy and the engine performance
I see the option on your site to include/not include the camber bolts. I am not sure what to select...can you please help? Thanks!
Noticed the kit comes w/ a rear sub-frame spacer (x4) and this video did not show that installation?
How much would it cost to get that lift done?
Where can I get a camber bolt for the front assembly?
Which tires did the customer go with?
Will this work on maverick tremor ?
This kit works for Badlands edition?
Hello, I bought the 1.5-inch HRG lift kit. After installing it, the rear tires lean a little inward. is this normal? should they stay like this?
Hello,
I live in NC and have a badlands. How much would you charge to install?
Wait a second....... Honda rescue garage making parts for Fords. Is it April? This is pretty cool. Please tell me you are making lifts for the Escape as well. I have one of your lifts on an Acura, and it's been awesome.
Theoretically the kit will fit. We just need to get one in the shop to do an install.
Doe's it needed to be Re-aligned after the installation ben?
I ordered this but to save time I’m having my mechanic install and wondering what would happen if they dont trim the metal like you did? Could it damage anything
What’s the overall height of the truck after adding the lift?
Why is it you lower the engine for the 2.0L Badlands but this one does not get lowered?
What tires are you using??? (Brand-size) 🙏🏼
Since that top bolt on the shock has a lobe how and I supposed to know what orientation to put it in?
Initially it would be a guess. The spacer is going to cause the top of the tire to bow out. The camber bolt is to correct that and pull the top of the tire in. So initially put the bolt in where its centered and then rotate it until the top of the tire comes in some. It doesn't need to be 100% accurate as its only temporary until you go to a alignment shop and have a professional realign the front end which is pretty much always necessary otherwise you will have poor tire wear and could have other issues long term.
I have a 2021 Bronco Sport standard factory setup and would like to add bigger tires. I need to know will 265 wide tires fit without any issues ********
Lol
I saw on your website that you have a version of this lift kit for Badlands/First Edition. I’ve got a BL and want to lift it but none of the other lift kits from other companies are compatible with the BL/FE. Do you have a video on that one or can you explain how that one works? I haven’t looked under my BL yet to see how it is lifted from the factory… is it just from the suspension or is there a stock lift/leveling kit already?
The badlands/First Edition have different shocks and springs than the BB/OB. The springs are slightly longer and also use a hydraulic rebound stops. Source: media.ford.com/content/fordmedia/fna/us/en/news/2021/08/20/high-performance-off-road-stability-suspension.html
@@hrg_tv so the instalation should be the same for all models?
@@hrg_tv what is exactly the difference in parts between 1.5" lift and 1.25"?
Can you lift the base model with this?
YES
Ver naaace
What size tires did the customer upgrade to ?
245/R16
Ok be honest I have no experience working on cars. I know my way around tools tho. Can the average Joe do this easy or should I just honestly pay someone to do it for me? Which of course not sure how much it would cost if any idea please let me know but just seem intimidating to me.
I wouldn't mess with this nonsense
It's pretty easy but just have a shop do it so you can get it aligned at the same time. I've never lifted a vehicle but I have slammed a mustang. 😄
Can you lift the badlands with this kit?
I'm wondering this too, I know the Badlands comes standard with more lift, but I would love to have the biggest tires possible.
Thats amazing information about HRG Engineering Company: czcams.com/video/O_MW1Si8FH0/video.html
Will 265/70R17 BFG KO's fit with this lift kit? 🤔
No
Pretty sure you can fit it with some cutting. Going to try to fit 31s on my wife's Bronco 🤞
@Robert Garcia sweet. Yeah, please give us an update!
So I could, technically, order two sets of spacers and get 3" of lift?🤔
No, it does not work that way. They will not physically fit
Rough country same thing $250
Rough Country wasnt designed with a flange like the kit from HRG. So its prone to rattle. Read other blogs.. if you're cool with rattles... go the cheaper route
To much work for me