the other day while doing some tree work around the house I notice that the chain was not getting lubed. the saw is almost new I bough it used but is was in almost new condition.
Appreciate this! Just picked up a used ms 192 tc. Runs really well, but then I noticed that oil was not adequate to the bar & chain. The manual I found on-line didn't explain anything about bar oil adjustment. Looks like there is no adjustment screw. So the oiler pump is either working or not? No settings to worry about? I'll pull that break wheel like you did and check the oil pump. Thanks again!
Successful! Found a partial blockage in both the black rubber oil delivery ("T" shaped rubber hose and distributor end). Also the pump itself looked dirty so I simply flushed it back & forth in some clean gas and all the gunk was removed. Between these two partial blockages, the oil feed quantity doubled AT LEAST! Bar & chain are now getting a steady and very adequate oil supply. Your video gave me the courage and just enough info to dive in...! Thanks again!
*hits like for unexpected burnout* video might not even help but that was nice
Appreciate this! Just picked up a used ms 192 tc. Runs really well, but then I noticed that oil was not adequate to the bar & chain. The manual I found on-line didn't explain anything about bar oil adjustment.
Looks like there is no adjustment screw. So the oiler pump is either working or not? No settings to worry about?
I'll pull that break wheel like you did and check the oil pump.
Thanks again!
Successful! Found a partial blockage in both the black rubber oil delivery ("T" shaped rubber hose and distributor end). Also the pump itself looked dirty so I simply flushed it back & forth in some clean gas and all the gunk was removed. Between these two partial blockages, the oil feed quantity doubled AT LEAST! Bar & chain are now getting a steady and very adequate oil supply. Your video gave me the courage and just enough info to dive in...! Thanks again!
Thanks good to know it was the same on yours.
HOLA
Hello