А whiskey barrel from an oak log | DIY | How to make a wooden barrel with your own hands
Vložit
- čas přidán 20. 08. 2024
- How to make a whiskey barrel with your own hands. We make an oak barrel at home. The whole process of making a wooden barrel in a small garage. Video on "TM ZHENATAN WoodWorking" CZcams channel. • А whiskey barrel from ...
------------------------------
Facebook group: Wine and barrels TM ZHENATAN
www.facebook.c...
------------------------------
Wooden Beer Mug DIY: • Wooden Beer Mug DIY | ...
------------------------------
Oak barrel made entirely by hand | Woodworking | Аncient craft: • Wooden barrel made ent...
-------------------------------
How to make an small wooden barrel: • Small wooden barrel | ...
-------------------------------
Cherry barrel from an old log: • Cherry barrel from an ...
-------------------------------
Making a apple barrel: • How to make a Apple Ba...
-------------------------------
LIKE THE VIDEO, SUBSCRIBE TO THE CHANNEL
/ @tmzhenatanwoodworking...
-------------------------------
LIKE AND SHARE WITH YOUR FRIENDS
#oakbarrel #woodenbarrel #howtomakeabarrel #doityourself #DIY #whiskeybarrel #diyprojects #wood #handmade #cooper #makebarrel #ancientcraft #woodworking
That coopers clamp thing is ingenious. This video makes barrel making look easy, which is a testament to the cooper, not the ease.
Thank you very much!!!
Good morning everybody! Another video on the channel "TM ZHENATAN Woodworking"... How to make an oak barrel for whiskey from a log with your own hands... Friends! I wish you good health and a peaceful sky above your head. Like and 👍 subscribe to our channel!!! Happy viewing!!!
A true craftsman and a pleasure to watch the process.
Thanks!!! I'm glad you like my work...
What an outstanding video. Not a single word spoken in the entire 20 minutes, like a masterpiece from the silent film era. No call to "like or subscribe", no four minute explanation that he's about to do the thing you knowingly searched for. He could be a mute for all I know, yet it doesn't matter. I wish this man could make every DIY video I ever needed from now until the end of days. A man and his barrel with a costarring cast of tools. He plays the role of cooper masterfully, but his true master craft is filmmaking.
Thank you very much!!! I am very pleased to read such comments. I am very glad that you liked my work and my video...
Классный мастер красавчик.
Эх жаль, как бы можно было бы заказать у него бочку?
Great video
Thank you very much!!!
would love to see a drawing (plans) for the two or three jigs used to taper and cut the side angles for the staves. Excellent craftsman at work utilizing available resources with pride of workmanship. "Work is love made visible" K. Gibran
Thank you very much!!! Here are some videos on my second channel that will help you. CALCULATIONS and TEMPLATES | MILLING RIVETS | ASSEMBLY and STRIPPING THE BARREL: czcams.com/video/_ae8lUzGrzQ/video.html
DIY WOODEN BARREL | Milling cutters | Making the bottom | Assembling an oak barrel. czcams.com/video/cE_Nmrdr9f4/video.html
I sincerely hope you never experience a kick back on that table saw. Didn't appear you have much room to get out of the way.
You have inspired me to try this project too. Thanks for posting this video.
Thank you very much!!!
No wonder wooden barrels are so expensive. Lots of skilled labor involved. 👍
Thanks!!! I'm glad you like my work...
Love your work and the way you demonstrate the craft.
Thank you very much!!!
Beautiful
Thank you!!!
I use a home made radius jig. You can mill different widths of staves. I use jigs for 1ltr right through to 500ltr.
I want to make a device to make barrel staves of different widths...
Ponder talking to us as we came here to be educated! Thanks for sharing and the best of luck!
Thank you! I am very glad that you liked my work and my video... And good luck and Merry Christmas to you!!!
Id love to buy 2 of these!
Thank you!!! I sell barrels very rarely, because this is my hobby, not my income... And I send by mail only within Ukraine for now...
Climate Friendly Eco Friendly Barrels
Amazing!!! Craftsmanship at its best.
Thank you! I am very glad that you liked my job...
Wonderful video! Such a skilled craftsman!!
Thanks!!! I am very glad that you liked my work...
fine cooperage!
Thank you! I am very glad that you liked my work.
BEAUTIFUL!!!
Thank you!!!
I am putting in a small experimental craft distillery I really wish I could purchase some of these barrels from you😊 it would be nice to have some 15 gallon barrels that were home crafted.. so that I could age my own wildflower honey in them before putting whiskey into
Unfortunately, there is a war going on in Ukraine now. Therefore, for now I send finished barrels by postal companies only within Ukraine...
Isn't that a shame I hope you stay safe maybe one day in the future@@tmzhenatanwoodworking7252
Coool!
Thanks!!!
I never thought I’d see an electric chainsaw smaller than mine. I feel for ya brother.
I already have a slightly larger electric saw, brother...
good
Thank you!!!
Fantastic. Thank you. I will try my best to recreate it. I will film it and post it too!
Thank you!!! I am very glad that you liked the video... Try it. This is a very interesting activity... If you have any questions, I will always help with advice...
Fantastic workmanship, well done 👍
Thank you!!!
Wow! Great video, I have some oak wood I had milled from my front lawn, it’s gonna be tough but I will be attempting to make an aging barrel for bourbon soon, cheers.
Thank you!!! I am very glad that you liked my video. Try making a wooden barrel. This is a very interesting activity...
Das größte jemals gefertigte Holzfass stand im Weinkeller der Festung Königstein. Das Fass von König August (sein Spitzname war August der Starke) hatte eine Höhe von 10,5 Meter und war 15 Meter lang. Es hatte ein Fassungsvermögen von 238600 Litern.
In english:
the biggest ever made wooden barrel was standing in the wine cellar of the Königstein (Kingstone) Fortress. The barrel of King August (his nickname was August the Strong) was 10.5 meters in Height and 15 meters in Lenght. The capacity was 238.600 liters or 59650 gallons.
Vielen Dank für diese nützlichen Informationen!!! Aber soweit ich weiß, wurde dieses Fass angesichts der Menge an Wein, die damals in dieser Region produziert wurde, aufgrund seines großen Fassungsvermögens nie mit Wein gefüllt.
Great skills. Interesting to watch.
Thanks!!! I'm glad you like my work...
Very interesting! From Missouri
Thanks!!! I'm glad you like my work...
One of the most interesting videos I have seen in awhile!! Very good.
Art from Ohio
I sincerely hope all is well with you in your war torn country - much love from America. I am honored to be a subscriber of your channel.
Thank you! I am very glad that you liked my work and my video... With your support, we will certainly win this cruel war...
pretty
Thanks!!! I'm glad you like my work...
Well done sir!!
Well done sir!!
"Nice barrel! Where did you get the timber?"
"The forest"
But seriously. Impressive work!
Thanks!!! I am very glad that you liked my work... Oak logs were brought to me by my friends from the forest...
Well when this stupid ass war is over I sure hope we can connect and I can get a couple 15 gallon barrels to try out😊
Necessarily!!! I also really hope that the war will end soon...
Impressive sir! Thanks for sharing!
Thanks!!! I'm glad you like my job...
nice work, from Uruguay
Thank you!!!
Well, you made that look easy...
Harder if you make them barrel shaped.
Thanks!!!
Reconozco que eres un gran artesano,feliz navidad
¡¡¡Gracias!!! Me alegro mucho de que te haya gustado mi trabajo... ¡¡¡Y feliz Navidad para ti!!!
This is so cool.
Thank you! I am very glad that you liked my work and my video... Merry Christmas!!!
What amazing skill. Really enjoyed that. Subscribed.
Thank you! I am very glad that you liked my job and my video... Merry Christmas!!!
Amazing skills! Great job! I am enjoying your channel and learning a lot. Subscribed. 👍
Thank you! I am very glad that you liked my job.
As cool as it would be to follow your video, I realized one problem on my end. Your hands are much more steady than mine, I wouldn't get a good final product if I made one.
Thank you!!! I am a self-taught cooper and I used to think so too. But then I decided to try and started making the first barrel...
Very nice video. I would like to try making one. Could you please tell me how to figure the length of the bands for the ends and middle? Also, what angle to put on the side of each board. Thanks
Thank you!!! Watch these two videos. They will provide answers to your questions: czcams.com/video/qeHGh-Y8tgo/video.html
czcams.com/video/vsfZ4Yhxmgg/video.html
perhaps put the tap hole in before finishing the body construction. How do you get the sawdust and that chunk of wood out?
To drill the cork hole I use a hole saw... After drilling the hole, the round piece of wood stays inside the core bit and sawdust getting into the barrel is minimized...
Before they fill barrel with whiskey they burn barrels inside and add several pounds of maple charcoals to it, a few pieces of sawdust from a oak board will not contaminate anything
Some things are best done much the same old way they were done years ago.
Horse shoes are another example.
You are right ... Here is a video of making an oak barrel using ancient technology: czcams.com/video/gTIoRtujfww/video.html
Канада смотрит и восхищается!
Спасибо большое!!!
Very beautiful. I would like to see that template/gig you used to router the angles on the staves, do you have a video showing this tool up close? Thank you for a truly wonderful video.
Thanks!!! Very soon there will be a video in which I will show how to make such a template for milling rivets...
Exactly my question. Can't wait for the video.
@@tmzhenatanwoodworking7252 Thank you so much. I really like the apple barrel video too.
@@aerialrescuesolutions3277 Thank you! Merry Christmas!!!
This is amazing! Great craftsmanship! What happens to the wood chips that fall inside when the bung is drilled? Is there a way to get them out?
Thank you so much!!! I am very glad that you liked my work... To drill the filler hole, I use a core drill, inside which remains a cut round piece of the barrel, and all the small chips remain outside the barrel. Thus, the ingress of sawdust into the barrel is minimized ...
I know that hoopers used to heat the steel hoops before putting them on wagon wheels so they would tighten to the wheel as they cooled. I guess I always thought that was how it was done for barrels too. This was a great video. What is the taper angle of the staves?
Thanks!!! I am very glad that you liked the video. The difference in the width of the riveting in the middle and along the edges is 12%.
Nice to see you, countryman)
"Хатинка Нареченої"))
А ви робите бочки чисто для себе/відео, чи на продаж?
Доброго вечора! Роблю бочки у вільний від роботи час. Іноді продаю по готовності...
Bel lavoro semplice x chi sa fare
Loved the video. Trully I did but could you add some text about tooling, process or where did you get or how yo make the jig for the planks (staves?). I'd love to attempt this type of project. The skills alone would be nice to know.
Thank you! Soon I will make several videos in which I will describe in detail each stage of making a barrel and show the tool needed for this...
Great video. Is there a formula for the curved shape you drum sanded into the slats?
Thank you!!! Watch these two videos: czcams.com/video/qeHGh-Y8tgo/video.html
czcams.com/video/vsfZ4Yhxmgg/video.html
Would you happen to have plans for the barrels ?
Thank you
Very nice look at what it takes to make a barrel. I especially like the trick with the spanner, using 6 radii to determine the circumference. Are you using stainless steel pins to hold the lid together?
Thanks!!! I use stainless steel pins with a diameter of 2 mm.
Wow! I am truly amazed by your skill! How long has is taken you you to learn and perfect this art?
Thanks!!! I am very glad that you liked my work... I am a self-taught cooper... I started making my first barrel in January 2019... It was quite difficult to understand and learn all the secrets of cooperage. But I patiently read old books, watched films and tried to make barrels... I took some of the information from books, some from videos on the Internet, and invented a lot of devices, machines and methods of work myself. A year later, I already made my barrels quite quickly and with high quality ... Well, how I make barrels for whiskey and wine now, you saw in my video ... Thank you for watching!!!
@@tmzhenatanwoodworking7252 That is amazing! I want to learn to make my own barrels and because of your videos, I will look into it. Thank you!!!
@@-G-Mac- Thanks!!! I am very glad that you liked my work... I am a self-taught cooper... I started making my first barrel in January 2019... It was quite difficult to understand and learn all the secrets of cooperage. But I patiently read old books, watched films and tried to make barrels... I took some of the information from books, some from videos on the Internet, and invented a lot of devices, machines and methods of work myself. Therefore, I decided to share my knowledge with other people who might also want to make their first barrel... If you have any questions, ask. I will always help with advice. Health and peace to you and your family!!!
If you ever offer a class sign me up.
ОК.
Is that a home built, belt-driven, sliding chop saw?!
Yes. I made this circular saw with a belt drive with my own hands.
Excuse me, I have a question, I heard that before oak wood is used to produce barrels, they put it in water for a while to remove the wood poison! Is such a thing true??
No, it’s not true... Oak blanks must dry in the open air for several years. Then they are used to make barrels. And only then do they fill the barrels with cold water for 7-14 days, periodically changing the water in the barrel to remove excess bitterness (tannins) from the oak...
Am i right in thinking that his router bit in the table is set at the angle which both cuts out the stave template and bevels at the right angle all at thr same time?
That's right. The cutter is set at the desired angle. With its help, I simultaneously give the workpiece the required shape and process the side edge of the barrel staves at the desired angle... Watch this video. It clearly shows these points: czcams.com/video/qeHGh-Y8tgo/video.html
@@tmzhenatanwoodworking7252 thank you. How have you set your router up? We struggle here in the UK getting tilting router tables. I take it your table shown on your templates video is the actual temple size and not the finished/routered template?
you have the measures
I didn't see you check for leaks. Did you swell it?
I fill the barrel with water for a few days before pouring wine or whiskey into it. In 99.9% of cases there are no leaks...
I really like the Woodglut plans.
How much for those barrels?
Such a 50-liter oak barrel in Ukraine costs about 100 US dollars...
@@tmzhenatanwoodworking7252 In French or American oak it should be possible to charge at least 3 times that cost.
@@JN2023 I know... In Ukraine, a French or American oak barrel costs something like this...
I disagree with most comments here. For a video labeled "DIY - How To" thos is a poor video and waste of time for the viewer.
No complaints about watching a craftsman at work but without naration this is NOT a "how to" video.
Do you sell these barrels?
I make barrels in my free time... It's more of a hobby than a way to make money...
@@tmzhenatanwoodworking7252 but which country are you in? If I drive past your workshop I might want to buy one.
Consistently Pray for forgiveness, guidance in a good (positive) direction, and for help against evil. Pray to be saved from hell (whatever that may be). Pray for your friends and your family too, it only takes a minute or so/less at a time to pray. Do it and your life will slowly get better, or maybe quickly. It probably just depends on you and the kind of person you are/have been. Don't wait until its too late and you have to suffer the consequences of built up bad karma from immoral acts/unrepented sins. Maybe together we can help make the world a better place by changing ourselves for the better, and changing things around us for the better.
And addressing/thanking the CREATOR, LORD GOD at the beginning and end of your prayers would be a good idea 😊
Or just be my friend if you don't want to say the prayer 😄
I'm trying to help you get right with the LORD🙏
Amen.
You should prostrate yourself if you don't want to do spoken prayer, or do both☺ Please worship the LORD GOD and not any idol. 🙏
That's no oak
This is a real English oak that grows in Ukraine...
Boring
If the truth was to be known it is probably YOU that is boring.
Thank you!