EZGO Solenoid Click but No Run

EZGO Solenoid Click but No Run. We take you step by step over the electrical system with the controller to the motor. Watch as we show you how and what to check for if you have this issue.
Use Code For 15% off - CSTV15
Get your Cart Smart TV T-shirt Below
www.mygolfcartshop.com/p-2480...
Our Ship To Address is;
My Golf Cart Shop
3505 Figsboro Rd.
Martinsville, Va. 24112
Call Us for any Golf Cart Questions or help
276.632.8905
Follow us on;
Instagram -
/ mygolfcartshop
Facebook -
/ mygolfcartshop
Facebook -
/ cartsmarttv2
#golfcartrepair #ezgo #golfcart

[@jimpalmer7162]

Video was great helped me fix mine. I’m off and cruising again thanks for the post

[@Nobody_Important_Yea]

Always learn something, Thank you.

[@jamesrushing7591]

I got a 2002 western 42v cart here and I followed your video but I lost power at the small lug on the solonoid what direction should I go next?

[@jamesrushing7591]

Here’s a list of my results following your video
Pack v 43.7 brand new batteries
Pack v on white charger wire
Pack v on green fr wire
Pack v all 4 lugs
Bat + to m- 1v pedalup, pedal to the floor pack v
Sm terminal on the left of the solonoid pack v
On the controller:
Red wire pack v
Black wire 6-7v vid says 14-15v
White wire 0-2.4 vid says 0-1.8
B- to b+ stays at pack v vid says goes to 0
There is my findings if you have any ideas let me know thanks

[@cartsmarttv]

Sounds like the ITS but don't count out your controller as they communicate together. Give us a call if you can to talk to a tech. 276.632.8905

[@octaviousmillz2864]

When I do the high amp circuitry test I'm getting 23.7 then I press the pedal I get battery pack voltage. So is the controller bad?

[@cartsmarttv]

Are you getting battery voltage from the M-?

[@octaviousmillz2864]

@@cartsmarttv yes when I press the pedal. With just my lead on m it should read 0 right? Mine is reading 23.7

[@matthejl8]

When I look for voltage on all F/R posts. I don’t get it. Only on bottom. Do I need to have in forward? Gas pedal pushed? Or all should have pack voltage also? Also I have the resistor on the big posts of the solenoid. Won’t that show voltage on B- and B+ even when you hit the gas?

[@cartsmarttv]

@@matthejl8 you should have voltage on all 4 lugs of F&R, yes to the Resistor.

[@matthejl8]

@@cartsmarttv only voltage on one, but in all other appropriate areas…means prob bad FR switch?