How to Replace BMW e46 Lower Radiator Hose
Vložit
- čas přidán 4. 02. 2019
- I'll show how to replace this problematic lower hose on the e46 series BMW. Hopefully save you some time and keep you from bursting the hose when you're out on the road...Enjoy!
- Jak na to + styl
Would be great to have the link for that part (Lower Radiator Hose) Good video.
thnx alot for sharing , it was useful
This hose can degrade when you have a leaking power steering reservoir. Keep that in mind if you notice the power steering reservoir leaking. In that case fix the power steering reservoir leak before you change this hose.
power steering reservoir leak can also cause alternator failure...twice, hahaha. ;)
every time I fix something with this car I learn of 10 other possible problems…..lol
Thanks for this!
Did you end up posting the front end replacement video? I would very much like to see it.
Did you end up using both drains or just the drain of the reservoir??
I took mine off but I believe an o ring and a plastic ring came off, and im not sure how to put the rings back so its leaking. Any help would be great
Thanks for the video. My 02 325i had a leak on this hose. I just removed it - a lot harder that what I was hoping for. The hose connector where the top of this hose connects seems to have some play side to side. Not much. Anyone know if I should be concerned with a little play? Does anyone know how hard it is to get to that water hose connector?
I was changing my reservoir tank 2 month ago and I was trying to get this specific hose couldn't come off but the other day it bursted lol time to change it
Were you able to replace the lower hose by draining just the overflow? Or did you have to unscrew both drains?
can you do one where you show where the upper part of the hose connects by the engine. having trouble finding it on mine. hoping it's easy. mine starting leaking right at the ring like yours did.
What is the hose that connects to the expansion tank right above the lower hose? What is it called it seems like it connects to the firewall
Nice video 👍👍👍
Thank you. Appreciate the support.
Thank you man
You're very welcome. Glad I could help out.
Awesome video!
did you end up draining the whole system? or did you only drain it from the small drain bolt underneath the radiator expansion tank?
Yeah I eyed balled the leak and didn’t take out the air filter so I didn’t know the leak was coming from the bottom holes .
Hello
We had this same hose leaking...replaced it following your steps. Thanks for the helpful video. Its a new hose but still leaking from same spot. Any suggestions. 2005 bmw x3
Thanks another for great videos
I think there is a small o-ring in the end of those hoses. If it falls out while your working it will leak. I have had that happen before. Also, make sure the hose is all the way on and the locks are in place. Good luck. Tanks for watching.
Have you ever replaced the air intake for the alternator that you removed around the 5:30 mark? Mine is tearing and I can’t seem to find anything on it
Hey I have an intake behind the alternator and it’s not connected to anything, should it be?
Would the lower radiator hose be the culprit if there's a coolant leak after the engine warms up? It's definitely not the radiator itself, more near the engine than radiator.
There's two pipes as well underneath the intake that fall apart; probably your culprit.
Do u have a video how to replace the upper house?
That's a great idea. I might just do a vid on that. Thanks for watching.
i changed out the lower hose too, but the hose is now leaking from the connection, so whats next? i have had my 325i parked now for close to 2 years, because of this fear of my engine gasket glowing up, so i decided not to mess with this till i fix this problem correctly. i changed out the reservoir, all the hoses even the ones under the intake, and still have this leak, i am giving up on this and have tried many times with even the old one, all i was wanting to do was i had a leak and the car started overheating so i changed out the entire coolant system, i hope i can get some help for this, thank you!!
I had the same problem and I ended up fixing mine with a mixture of grease and pushing down on it really hard, I don't know what else to say but I hope this works for you
reconnection is a challenge, and with grease, and soap, and swearing still could not get it done in 3 hours! perhaps an offbrand replacement of radiator but the hose rubs the wheelwell and will not advance.. must be a tool that pulls them together maybe like a gear puller?
May need your actual help with a 325ci I’m buying.. seller says never got hot but popped both rad hoses
Dude...That sounds like overheating, or just absolutely no maintenance and the hoses just ruptured. I'd steer clear.
I appreciate video BUT u didnt show us other end of hose connect and if can do without draining coolant? My tank is dry so Im fine and probably dont need to see other end but others might.
That's exactly what I wanted to see. Poor video.
My hose didn't slip off- it was on so tight that I had to cut it off and pull the radiator. Even then, I almost damaged my radiator trying to remove it. I bought the entire coolant hose set and I'm struggling to remove another one. I'm afraid that I'll break the plastic connector. I've searched online for a good method to no avail. This is a total nightmare.
I'm honestly so confused. This hose looks like the hose that connects to the side of the expansion tank. Are they the same hoses?? Because I've purchased this exact same hose before but never replaced this hose.
it's called "Coolant recovery Tank Hose", but the major retailers don't list it that way, you have to search for "radiator hose" and find the one that looks right... I'm currently searching for a video that shows how in the heck you get that top connector loose, and this video certainly didn't show it; You can't reach it, or at least I can't, and I have small hands. back to the search.
The only thing is disagree with is leave those springs down so you get an audible click when you put the new one on. So you know it’s seated.
Got lucky mind burst in the yard
Almost perfect, I just wish I could see where the top end of that hose connects!
Forreal he skipped the actual job
U could see it right away when u take off ur air filter
I'm trying to replace this on my 04 330i and I cannot for the life of me get it off of the hard molded water pipe
this is not a lower radiator hose, the lower radiator hose is connected to the bottom right side of the radiator
You had engine oil in the cooling system for that reason hose get swollen and Popoff.
Anybody know the real name of this hose so I can order it 😩
RealOEM.com is the best place to get names and part numbers for everything BMW. Thanks for watching.
I can’t find the part, different coolant hoses keep popping up
Check realoem.com. You should be able to get the exact number (and all previous numbers) for your car. It's even broken down by production date...Good luck and thanks for watching.
11531436410
hi im having difficulty inserting the lower radiator hose back to the radiator outlet ive clean the o ring then spray with silicone spray but still it cant sit in properly im thinking if the o ring or those notches blocks when i pushing it through i give it a slight gorilla force just to push it but im cautious that i might break the radiator outlet. i really dont know what trick should i do to connect it properly please help me. thank you very much.
i clean opening of the lower hose multiple times tried wd40,silicone spray,pour hot water thinking the gasket might flat a little bit? but i cant push it all the way i even use coolant and oil on the opening of the hose just to slip it in the radiator input but no luck tried pushing aligning with the notches keep trying i even use sand paper on the surface of the radiator input still cant go all the way. btw i used my old radiator hose didnt got a new one.
Not sure without pics...but...make sure you actually have proper hose for your BMW, make sure slots are aligned (they only go one way), and (I have done this one before) make sure the metal locking wire is pulled all the way back on both sides. Another thought...if your prior hose was very old the old o-ring may still be stuck on the outlet. Good luck. Hope this helps....
My hose looks the same, I’m doing the radiator at the same time and removing the aircon fully. The end clips are a pain to get off honestly!
This is a lower heater hose..
What's the number of this part?
I don't recall...but...if you go to realoem.com you can look up most every single part on BMWs...Great website. Hope this helps and thanks for watching.
11531436410
Ok video but Entirely to much talking
adhd
Me?...or you?...maybe me. I dont' know. Maybe you? maybe wrong camera setting...or lighting...or I forgot to eat breakfast...ok, maybe me?
Worthless
TOOOOOOOOOOO much talk....just do it !!!!!!