How to Install a new updated USB module for Apple CarPlay and a 2016 Ford F-150 when the Update wasn’t enough I learned you needed a newer USB module...
I went through the process and followed the directions exactly. It took my car over 3 hours to update. Not sure why. But when it got to the end and said installation complete. It worked! One thing none of the CZcamsr's never mentioned was that the screen gives an alert saying that the USB is not compatible. Even though it all still works. My guess is because i got the parts from Amazon and not from Ford.
This applies for 2016 Ford Fiestas and Fiesta ST's im having the same problem in my ST, i just need to find out which one to put into my car. This video helped alot i thought i was the only one not getting it, after i updated to v3.0 Sync.
Thanks for your video. I did this last night and it worked. The only thing I wanted to add was that my USB ended in “-F” not “-B” at the end of the numbers the that were the same as yours on the box. Just an FYI.
Thanks for video. It made the process much less stressful. One difference I had was that my 2016 F-150 would not update from SYNC3 v.2 to SYNC3 v.3 until after I swapped the USB hub. The vehicle said that it successfully installed the update from the thumb drive (SYNC3 v.3), but until the new hub was in, the head unit still displayed the old software version. As soon as the hub was connected, I started the vehicle and v.3 was displayed. Everything works perfectly with the iphone X connected via an Apple lightning cable. I was surprised to learn that I could use Google Maps and that I was not confined to Apple Maps.
I have looked forever trying to find the updates for SYNC to download to a USB with zero luck. Ive been on the ford site , made and account, put in my VIN etc with zero luck on finding a place to download the update. I just purchased my 2016 F-150 XLT with the same system as in the video and I am guessing I need to upgrade the USB hub as shown , but I also need to update the SYNC - if you could please let me know where you located this update file I would appreciate it!
@@robbiewynne8743 I originally did it on my desktop PC, but I only have my phone available at the moment, so that is what I'm using as a guide for you. In the Chrome browser settings, I chose "Desktop Site" because I couldn't find the section on the mobile-formatted site. 1. Start at ford.com/support 2. Select "Search by vehicle" 3. Enter your VIN and select "Search" 4. Scroll all the way down to the "Sync Updates" box and select "View Updates" 5. The latest update should be available to download to a USB flash from the page that opens.
Thankfully, CarPlay now allows other navigation apps... at least on my other Sync3 devices. I had a 2016 C-Max and went through the update. I then traded that in for a 2018 Fusion, which was already setup for CarPlay. I think I was able to use Waze prior to trading in the C-Max. The reason I came today is I just bought a 2016 F150 to replace my 2013 Explorer and it hasn’t been updated yet. I ordered my new USB hub, which will arrive tomorrow. I couldn’t remember which I am to do first... update firmware or update hardware. I THINK I’m supposed to do software first.
Just wanted to add my thanks as well. Worked great. I found the part at Ford Discount Parts ($50.30). This is what I ordered: HC3Z-19A387-E 2016-2020 Ford Control Module.
I cant even get my pos to update, let alone install the module, but I have spent $85 for no CarPlay still. If you do plug the module in before updating it, the pos says its a bad USB and to remove it
Good video i have the part number on my video but if you got to your ford dealer just tell them you want the latest production usb port apple car play compatible they can be a pain to pop out some times especially on the newer edges got you with a sub 🇺🇸👊🔴⚪🔵💪👍
Going to go get this part after work today I’m tired of Bluetooth connection and the volume for music also is lower through Bluetooth than through Apple CarPlay or android whichever you have
I have a '16 F-150. Sync 3 updated to version 3.0. Bought this exact same part from the Ford Dealership. Installed just as seen on this video however I immediately got an message that states " This USB device is not supported. Please remove". Then bought another USB module online and got the exact same error. Anyone else had this issue? Any suggestions?
I installed this product and I love the functionality. Only problem is my volume up/down and other steering wheel controls don’t work like they used to. Did you have this problem too?
@@fordtechlife i figured out the problem; you have to be on the screen you want to control on my truck; volume up and down for example, i have to click on spotify/music screen, and it'll work correctly; siri button works from any screen.
That came out wrong So all I have to do is buy the part and everything is already loaded. I don’t need any download or upload or anything ???? What’s link to where you bought part Thanks
@@billwandling318 You have to upgrade your Sync system. 2016 Sync comes with version 1.0 and you need to update it to 3.0 You have to go to the myford website where you are able to login or create an account, register your vehicle and then download the new version onto a usb flashdrive, then go to your vehicle and plug that usb in and your system will detect the update and start the process. Should take about 30 minutes and have to leave the vehicle on, install this part an bam, Apple Carplay. If youre running Android however Android Auto will connect wirelessly. Its a bit more than just downloading though, look up specifics through other sources. 1 your flashdrive will need to only have that file on it i believe and have one with at least 3gb of space, then you will need to reformat the flash and file you download. Sounds tedious but its really simple, if youre lucky you might be able to call the dealer and just have them do it for you although it will probably require an appointment and end up taking hours instead of 30 minutes
It's stupid that you need a new module for this. It should just be a dumb module that passes USB straight to the head unit with separate dash light wires. By the looks of the connector, it's a special USB mini-B connector and the module is a USB hub which should be standard.
I did this in my 2016 Taurus. Works great but to be honest if you already have Sync 3 you do not really get much additional functionality with Apple CarPlay although my car already had navigation in it. I am hoping more apps become CarPlay compatible because most of the time I actually leave it turned off. I do like having the option though because I can use other Navigation apps if I need to and still see the directions on the car screen.
How did you get it in a 2016? I was talking to a Ford/Sync Representative today and they told me that only cars after 2017 have Sync 3 and that you cannot update Sync 2 to Sync 3.
@@dylanmurphy7814 Some 2016's had it. Also, they will tell you that Sync2 cannot be swapped with Sync3, but you can. It is a drop in replacement. You just need the screen/apim assembly, a GPS antenna, the USB hub listed in this video, and a power adapter for the hub from a source such as Infotainment or 4DTech.
lol 😂 “do not get much additional functionality with CarPlay “ what are you expecting. It makes the screen look like your iPhone and access to music and maps in a familiar way so
What kind of magic ass screwdriver do you have to do this? No way this popped right out with a regular screwdriver. I just spent and hour and this fucker is not coming out at all
Joey Ivezaj go register you car/truck on ford.com you can download the update to a thumb drive and then upload it to your car/truck or if your vehicle is WiFi enabled you can connect your car to WiFi and set automatic updates
I went through the process and followed the directions exactly. It took my car over 3 hours to update. Not sure why. But when it got to the end and said installation complete. It worked! One thing none of the CZcamsr's never mentioned was that the screen gives an alert saying that the USB is not compatible. Even though it all still works. My guess is because i got the parts from Amazon and not from Ford.
Do I have to unzip files 😊
@@rugarmoore7657 Yes. I ultimately had to get the right part from Ford and the problem went away
Thank you for this video. Husband spilled liquid in our usb hub on our Lincoln and I was able to replace it myself because of you! Saved me $200!!
At my Ford dealership they charged me $57. Got it to update to ver 3 in my F150 and Android Auto and Apple CarPlay works! Thanks for the upload!
foford what year do you have? I have a 2015 and I definitely want this
@@ballisticbrothers225 I have a 2016. I think it's possible too on the 2015 . Check out 4dtech.com and on CZcams
Just did this, easy and works perfectly. $57 including sales tax at the Ford dealer. Part number now ends with E instead of B.
in amazon now the las letter is F, I don't know if its going to be the same
PRO TIP: paint can opener to remove module
This applies for 2016 Ford Fiestas and Fiesta ST's im having the same problem in my ST, i just need to find out which one to put into my car. This video helped alot i thought i was the only one not getting it, after i updated to v3.0 Sync.
Thanks for your video. I did this last night and it worked. The only thing I wanted to add was that my USB ended in “-F” not “-B” at the end of the numbers the that were the same as yours on the box. Just an FYI.
Thank you for this. I followed your instructions to the letter, took 15 mins and it’s now perfect. Awesome video, very well done.
This is awesome. I must have reset that stupid thing after updating 10 times and finally gave up. Appreciate it.
Kenneth Lickliter no problem I was in the same boat thats y i did this video to help everyone out .
Thanks for video. It made the process much less stressful. One difference I had was that my 2016 F-150 would not update from SYNC3 v.2 to SYNC3 v.3 until after I swapped the USB hub. The vehicle said that it successfully installed the update from the thumb drive (SYNC3 v.3), but until the new hub was in, the head unit still displayed the old software version. As soon as the hub was connected, I started the vehicle and v.3 was displayed. Everything works perfectly with the iphone X connected via an Apple lightning cable. I was surprised to learn that I could use Google Maps and that I was not confined to Apple Maps.
I have looked forever trying to find the updates for SYNC to download to a USB with zero luck. Ive been on the ford site , made and account, put in my VIN etc with zero luck on finding a place to download the update. I just purchased my 2016 F-150 XLT with the same system as in the video and I am guessing I need to upgrade the USB hub as shown , but I also need to update the SYNC - if you could please let me know where you located this update file I would appreciate it!
@@robbiewynne8743 I originally did it on my desktop PC, but I only have my phone available at the moment, so that is what I'm using as a guide for you. In the Chrome browser settings, I chose "Desktop Site" because I couldn't find the section on the mobile-formatted site.
1. Start at ford.com/support
2. Select "Search by vehicle"
3. Enter your VIN and select "Search"
4. Scroll all the way down to the "Sync Updates" box and select "View Updates"
5. The latest update should be available to download to a USB flash from the page that opens.
Thanks buddy,I’m going right now to get the part.Thanks,I’ll let you know how it works.
Thankfully, CarPlay now allows other navigation apps... at least on my other Sync3 devices. I had a 2016 C-Max and went through the update. I then traded that in for a 2018 Fusion, which was already setup for CarPlay. I think I was able to use Waze prior to trading in the C-Max. The reason I came today is I just bought a 2016 F150 to replace my 2013 Explorer and it hasn’t been updated yet. I ordered my new USB hub, which will arrive tomorrow. I couldn’t remember which I am to do first... update firmware or update hardware. I THINK I’m supposed to do software first.
Just wanted to add my thanks as well. Worked great. I found the part at Ford Discount Parts ($50.30). This is what I ordered: HC3Z-19A387-E 2016-2020 Ford Control Module.
For the usb module, just tell the dealership you need the one for a 2017 F150. 2017’s came with apple CarPlay.
Just got my truck yesterday I gotta go get one of these !
Thanks for sharing they quote me $2425.36 with ur video I did it in $82.13 with tax and took me 15min 🙏
I cant even get my pos to update, let alone install the module, but I have spent $85 for no CarPlay still. If you do plug the module in before updating it, the pos says its a bad USB and to remove it
Good video i have the part number on my video but if you got to your ford dealer just tell them you want the latest production usb port apple car play compatible they can be a pain to pop out some times especially on the newer edges got you with a sub 🇺🇸👊🔴⚪🔵💪👍
Great advice!!!!!!
Thanks for showing this! I’m going to change mine out too
Just now using this video but it was very helpful but one odd thing my part number ended in BC but it still worked
Going to go get this part after work today I’m tired of Bluetooth connection and the volume for music also is lower through Bluetooth than through Apple CarPlay or android whichever you have
Thank you, kind sir… I hope it’ll work as easy for me.
What is the cable part number for the usb that give the usb power ?
Awesome info. just ordered one!
How long does software take to install
Did your truck come with the large display stereo? If not did you go through the dealership for the stereo.
Does it work for android?
Hey,
Thanks for making this video. Can you please share me the direct url to buy this product. I didn’t find the original one.
Thanks
I actually went to the Ford Dealership
Is there a way for me to get apple car play without sync my sync is outdated and I can’t upgrade because the feature is no longer available
Part number for 2016 Ford F150 is HC3Z19A387E. Just ordered mine online for $46
Do you have a link?
Can you post a link to the usb module? Is there another place to order it?
OEM is Best Ford Dealer
If you never found it look up Midway Ford on Ebay they have it
Can you do this with out sync having the navigation futures?
Would this work for the 4inch screen I just want the car play
Just curious how did it take to switch over to CarPlay
What do you mean should switch when it senses your Apple device in the USB port within about 5 seconds ?
fordtechlife yea I did the swap and nothin g
@@aldojr5552 has to be sync 3 and software level 3.0 or higher got to setting and aboutsync to check level
what about android auto? also need the same hub?
Yes anything before 2016 sync three
This didn’t work for me and I have 3.3 version of sync
I have a '16 F-150. Sync 3 updated to version 3.0. Bought this exact same part from the Ford Dealership. Installed just as seen on this video however I immediately got an message that states " This USB device is not supported. Please remove". Then bought another USB module online and got the exact same error. Anyone else had this issue? Any suggestions?
I have the same problem. The usb port don't recognize the devices. Have u fixed the problem?
It's the cable. Using an aftermarket or damaged Lightning cable will cause this. It's not the module.
Was this issue fixed?
Thanks for sharing Matt. Now that you have had it for awhile, has there been any changes or is everything still good?
Black6ear1 everything is working properly still no problems at all
TooLegitFilms2
Best $60 spent. Thank you.
Funny how the ford chime changed randomly while the truck was “booting up”
Do u have a link to the part?
I installed this product and I love the functionality. Only problem is my volume up/down and other steering wheel controls don’t work like they used to. Did you have this problem too?
No mine works fine
Ive heard of this it's a device issue depending on the device it may do that
@@fordtechlife i figured out the problem; you have to be on the screen you want to control on my truck; volume up and down for example, i have to click on spotify/music screen, and it'll work correctly; siri button works from any screen.
This started happening to me before I replaced this part
Hey
I just buy that part and it works
There download upload you need as well???
That came out wrong
So all I have to do is buy the part and everything is already loaded.
I don’t need any download or upload or anything ????
What’s link to where you bought part
Thanks
@@billwandling318 You have to upgrade your Sync system. 2016 Sync comes with version 1.0 and you need to update it to 3.0 You have to go to the myford website where you are able to login or create an account, register your vehicle and then download the new version onto a usb flashdrive, then go to your vehicle and plug that usb in and your system will detect the update and start the process. Should take about 30 minutes and have to leave the vehicle on, install this part an bam, Apple Carplay. If youre running Android however Android Auto will connect wirelessly.
Its a bit more than just downloading though, look up specifics through other sources. 1 your flashdrive will need to only have that file on it i believe and have one with at least 3gb of space, then you will need to reformat the flash and file you download. Sounds tedious but its really simple, if youre lucky you might be able to call the dealer and just have them do it for you although it will probably require an appointment and end up taking hours instead of 30 minutes
@@iR3J3CT_ sometimes to do it wirelessly can take about a month if you just connecting it and letting it do it itself when its around your wifi
How did you update to sync 3.0
Will this part work on a ford fusion 2019
Will this work on a 2015 F250 with sync 2?
Does this work on a 2015 F-150 XLT model?
Probably not in 2015 Ford had the mysync system and they went to the Sync3 system in 2016. Call the dealer and ask
Nice got you with a sup 💪💯🔧👊🔴🚗
It's stupid that you need a new module for this. It should just be a dumb module that passes USB straight to the head unit with separate dash light wires. By the looks of the connector, it's a special USB mini-B connector and the module is a USB hub which should be standard.
Curious, do you need to install the new USB module before you update The Sync 3?
No you don’t have to. You can update them in any order as long as they both get updated.
Does it still work great? I updated the sync and no Apple play...annnnd now my usb isn’t charging. So I’m asking before I attempt
Yup still works
whats the part number
What's the part number and where did you get it from?
penguinknees69 I got it from the local ford dealership
Hey! would Apple car play work on a Sync 2?
No but you can physically swap out your sync 2 system for sync 3
but how do we get Apple CarPlay wirelessly without having to plug the phone in?
grneal26 if it’s an iPhone sadly you need to plug it in for CarPlay
Donde puedo conseguir esto en mexico ?
Buenas tardes Alan, lo conseguiste aqui en mexico? Veo q lo vende aliexpress pero hay demasiados y tengo dudas sobre cual comprar
Does it work with 2015?
That's what I want to know also help
I did this in my 2016 Taurus. Works great but to be honest if you already have Sync 3 you do not really get much additional functionality with Apple CarPlay although my car already had navigation in it.
I am hoping more apps become CarPlay compatible because most of the time I actually leave it turned off. I do like having the option though because I can use other Navigation apps if I need to and still see the directions on the car screen.
How did you get it in a 2016? I was talking to a Ford/Sync Representative today and they told me that only cars after 2017 have Sync 3 and that you cannot update Sync 2 to Sync 3.
@@dylanmurphy7814 Some 2016's had it. Also, they will tell you that Sync2 cannot be swapped with Sync3, but you can. It is a drop in replacement. You just need the screen/apim assembly, a GPS antenna, the USB hub listed in this video, and a power adapter for the hub from a source such as Infotainment or 4DTech.
You can add and remove APPs via your iPhone's CarPlay settings under SETTINGS-->GENERAL
lol 😂 “do not get much additional functionality with CarPlay “ what are you expecting. It makes the screen look like your iPhone and access to music and maps in a familiar way so
Can you play videos on the screen from CZcams?
Will it work for android also ?
you just need android auto for sync 3. you shouldn't need the usb module
What kind of magic ass screwdriver do you have to do this? No way this popped right out with a regular screwdriver. I just spent and hour and this fucker is not coming out at all
note to self.... Don't make a video if you do not have a tripod for our camera!
Found it on Amazon: www.amazon.com/gp/product/B07SHSXRQ8/ref=crt_ewc_title_huc_1?ie=UTF8&psc=1&smid=A3H01BOCDZ66C0
Ipizzle? Lol
Sean Adams Lol yup
I called Ford. They quoted me $90 for cable and module. I have 2016 ford 150 echo boost.
You don't need a cable just the port / hub assy 🚘🔧💪
This whole thing is such a PITA. 😡
Pain in the Ass thats technology now days 💪🇺🇸👊🚘🔧
How did you update to sync 3
Joey Ivezaj go register you car/truck on ford.com you can download the update to a thumb drive and then upload it to your car/truck or if your vehicle is WiFi enabled you can connect your car to WiFi and set automatic updates
I went to dealership my truck still in warranty did it for free. Updated sync 3 still need the module.
@@johnfregeau7411 You can't update from Sync 2 to Sync 3 though, only if you already have Sync 3 you can update to a newer version of Sync 3.
@@andrewvaldez8783 yes if your within the 3 years 36 k miles and request to update your in 🔴⚪🔵🇺🇸👊
Is this the same for a 2015 f150 platinum?
No cause 2015 and under has the mysync system & 16+ has sync 3