Even Veteran Engineers Had To Learn This from Me! Idea of Using 1,5V Battery to Weld Aluminum Brakes
Vložit
- čas přidán 3. 04. 2024
- Hello everyone! You are watching video "Even Veteran Engineers Had To Learn This from Me! Idea of Using 1,5V Battery to Weld Aluminum Brakes
"
I hope you enjoy watching my video!
► Subscribe: / @gausdiy
On Gaus DIY channel, you can learn various inventions, tips, science projects, crafts idea and DIYs teaching how to reuse or recycle.
© Copyright by Gaus DIY ☞ Do not Reup
#diyprojects #tipsandtricks #diy #tips - Jak na to + styl
Idea for video creator:
Instead, take the output fuel line and place in left nostril. Pinch right nostril shut. Close mouth to prevent escaping gas. Turn on motor for approx 25-30 seconds. Have lighter ready. Open mouth slightly and ignite lighter near mouth.
Hopefully this method will prevent the posting of stupid ass posts.
LOL! Indeed!
Hallelujah! Holy Sh!t! Where's the tylenol?
Agreed, 😮 what a waste of time. Sometimes these videos just suckered us into watching.
@@jimmcclurg9885😊😊/😊😊/😊😊/😊😊😊😊😊😊😊/😊😊
Drill the holes using a drill press for precision. Use a hardened steel nail or brad. Assemble and bond pieces together with J-B Weld. Then throw away.
😅😅😅😅
install completed brake lever onto scooter then throw scooter away.
clean using steel wool under recently boiled water, put salt until it doesnt dissolve and some oil on top of the water to avoid dissolving oxygen, get a 5v wall charger and put your piece on negative and a bit of solder on positive, don't expose the aluminium to oxygen and always start the deposition right after you cleaned the piece, put the oil only when starting the deposition. Then after that thin layer is deposited you can use leaded or leadfree solder and it'll stick to aluminium.
@@fss1704 ... and then throw away.
buy a new one instead
Just an absolute waste of 13 minutes and 49 seconds of your life that you'll never get back.
I thought it was quite funny. I'm pretty sure it was meant to be.
Truly cringe-worthy...
Rechne mal die 400 + Leute , die sich das Vid angesehen haben als Multiplikator für "verschwendete Lebenszeit" drauf.....
Wir wollen doch verarscht werden , oder ?
Und mal ganz ehrlich , selbst wenns funktioniert hätte ? 10€ gespart und dafür fährt dann immer das Risiko mit das ich mit so einem Mist einen tödlichen Unfall verursache ? No Way !
Thx i stop watching the video at 3:32 😂😂
@@Sparta_nl You're welcome. He just throws it away and tells you to buy a new one at the end anyway.
I have broken motorcycle foot rest in my store. Thought about fixing it several times. Your video helped me a lot to throw it. Thank you
Truly the last Fix-It video you'll ever have to watch... 😂 13:36
Stimmt 😂😂😂😂😂
Eres un bueno para nada hubieras empezado por el final
It ignorant people that purposely wast others time for no other reason than to be a dick that shouldn't have a yt channel p.s.🖕@@Tandrabuddha
I think you mean the last one you WANT to watch.
アルゴン溶接してもらえよ
I love the end, it kept me hooked trying to figure out what was the point in this DIY.
Thank Bro
To borrow the words of the famous Guy Martin "this has got hospital written all over it" . if it doesn't get you during the repair it will get you after it.
I was thinking what a potential explosion. Wonder how long those hot glue joints will last with gas working on them.
Goal of this video achieved. I haven't laughed so well in a long time
Thank! Have a nice day!
Lost me when he used a self tapping screw as a drill bit🤣
That will work until you need to stop quickly and then you will find one piece in your hand and no brakes. Good luck with that.
Or if a bike falls over on cement and breaks the handle .
There's good ones and bad ones . That was pot metal . Recycled cast dirty aluminum made into bicycle parts .
Schade um diese Zeit und Arbeit. Das dümmste was ich gesehen habe nach max.2 min.kann man abschalten.😅😅😂😂 weil nur scheiß raus kommt.
Andy Kaufman humor where you get the laugh, but the joke is on us.
Die Mülltonne war das beste in dem Video
Take into account the cost of bit’s and pieces plus hourly rate a new one is cheaper and safer
Don’t watch to the end…complete waste of time!!!
but depend if can buy the same
"Buy a new one" only works if 'new ones' are available. Depends on the part in question. There are ways to weld aluminium reliably. This is not one of them.
Great video bro, you put a big smile in my face ... Thanks for sharing
Glad you enjoyed it ! ❤️❤️
An engineer would have told you that what you did was not welding but more of a back yard aluminum solder attempt. Welding involves melting rhe base metal and the fill metal so that they form a rather uniform alloy making a continous metal piece. You did not even achieve a good solder joint with your technique.
You have to watch til the end
😅😅😂😂
@@ZapattaZDon’t bother
He is just trying working with his hands until he gets the porn music studio off the ground
It's an act of brazing aluminum.
I would never run the risk of finding myself braking or shifting with a broken lever. it is a piece subjected to constant stress and for the little cost the game is not worth the candle
If the motorbike falls, it can cause the brake lever to break. Thank you, have a nice day!
@@GausDIYи позвоночника, чего уж там😅 так что всё же лучше заменить на литую😂 тут на велике опасно ездить, что уж там про мотоцикл говорить😅
@@GausDIY there's a reason if it breaks. Accidentally it's something that can happen, it's a different matter if it happens because I tried to repair it. the insertion of a pin, also made of iron, a harder material than the alloy, reduced the thickness of the section intended to accommodate it, thus being able to cause a sudden breakage during the stroke, the work for carrying out the welding was ingenious but certain materials are particularly unsuitable in DIY, I sold bar counters, compressors, scales, slicers, fryers, meat mincers etc... and our technicians did great on copper, soft iron and stainless steel, they were capable of making iron rollers for graters, but also for welding of aluminum or anodized alloys, brass, cast iron, antimony and more had to turn to equipped laboratories and it was often convenient to order the new piece from the supplier. good life.
I'm just gonna buy one. Thanks anyway. My tweeking sister in law would love this.
Hope you enjoy it!
Just started watching and am wondering what's in the middle bottle. Is that urine? Is it beer? 🤣
Yeah, why don’t they say what it is?! Probably is “apple cider vinegar.”
@@1-2_Flush_Water_Saver It`s the explosion barrier.
I wish i had’ve found this useful video before I went on Amazon and bought a brand new pair for $18.99 delivered the following day🤔
Thank you, but if you buy a new one, it will be very good and safe. Wishing you and your family a happy weekend
لايجب ان لا تستهانوا بأي فكرة
يجب ان نشكر الرجل لانه قدم لنا فكرة ناجحة بالمجان .هل هذا جزاءه البعض يستهان انا بالنسبة لي اشكره جزيل الشكر واشجعه واوحييه.
أشكركم على تحياتكم، أتمنى لكم ولعائلتكم السلام والسعادة
Was das für ein Video , wie Sprenge ich mich selbst weg , Kauf dir einfach ein neuen Bremshebel und du lebst länger 😂
That was priceless.
Come buttare un sacco di tempo e rischiare di incendiare casa. Proprio da ingeniere
Good job, just some people don't understand the enjoyment of doing this.
Yeah exactly! it is passion
Me parece que con lo q cuesta una palanca nueva no vale la pena perder tiempo y pasando trabajo con eso,lo q más me gustó es el título del vídeo,siga con esa humildad!!!!! Jajajaja
Que desperdicio de tiempo
😂😂😂😂 son los 13.48 minutos de mi tiempo perdidos poniendo atención al tip's para que al final solo me hiciera reir,jajajaja 😂😂😂
clean using steel wool under recently boiled water, put salt until it doesnt dissolve and some oil on top of the water to avoid dissolving oxygen, get a 5v wall charger and put your piece on negative and a bit of solder on positive, don't expose the aluminium to oxygen and always start the deposition right after you cleaned the piece, put the oil only when starting the deposition. Then after that thin layer is deposited you can use leaded or leadfree solder and it'll stick to aluminium.
That's like telling someone how to build a clock when they ask you what time it is.
Visto il valore, conviene comprarla nuova.
To make your weld with heterogeneous filler metal, you must first heat your support that you want to weld, so that it melts the filler metal, if it is compatible!? of which you will make sure beforehand that the latter has a lower melt degree index than what you want to weld. Otherwise congratulation for the creation and assembly of your blowtorch and the manufacture of the aluminum wrist brace, beautiful engineering.
There's 15 minutes I'll never get back
I thought the idea of reinforcing it by driving in screws was a great idea. Finally, filling the gaps with epoxy resin mixed with aluminum powder may have worked. I liked the honesty of the video by showing it to the end and then throwing it in the trash.
Aluminium oxidiert unter Hitze zu Asche, man muss es mit Schutzgas schweissen. Darum ist das "Schweissmaterial" auch verbrannt. Einmal googlen hätte gereicht.
Just get an ac/dc tig welder, bottle of argon, helmet, gloves, a workshop.
What a load of work for that. I’d rather just replace it
@@eddiee9491 true
Yeeeee Best!🤣🤣🤣👍
Thank Sir! ❤️❤️
I bet his mum wasn't happy with her dining table when she got home!
If your life has that litttle value i guess it s an option
I felt, I felt that something would go wrong. So much innovation and a spectacular ending😅😅😅😅😂😂😂😂
Saludos desde Barinas Venezuela gracias por compartir tus enseñanzas
wtf this was nice 😂😂😂
When I want to move a marking to another surface I use Engineer’s Blue. That’s a highly pigmented paste and is really good. They sell in different names.
OMG CZcams please give us a x8 speed button!
Jajajaja me hiciste reír de verdad pero no digas eso jajajaj si puede ser verdad eso es barato jajaja pero tuviste la 💡 tienes mucha creatividad Dios te Bendiga pero me dió risa lo q dices al final jejeje me sacaste una sonrisa y estaba triste por unas cosas y no pensé q este video me cambiaría la forma de ver las cosas y en realidad me diste una gran lección por eso me suscribí
had naar school gegaan dat had gescheeld!!!
Bello davvero.avete un' amico in più in Italy,Gianni.😊😊😊❤❤❤
Ciao amico dall'Italia, ti auguro una splendida giornata ❤️❤️
Mdr, so modest, that he will build us the future rocket by going to Mars
Put a copper tube over the break and hammer it tight andsqueeze it in a vice to clamp it
Excellent, going to break one then get a labotomy 😂😂😂
LOL using a wood file on metal.... brilliant
Da ich schon länger keinen guten Witz gehört hatte, konnte ich mich reichlich über dieses Video amüsieren 🤣
Pues despues de haber visto esto , me convencieron de ahirrar tiempo y gastos ....haciendo una compra de una palanca nueva.. gracias
Gracias, por ahorrarme doce minutos, de mi vida.
You know what. All you people keep complaining about this video but i don't see any of you having the mental capacity to even fathom this idea or even trying to bring something back to life. Including your manners... he did a great job and made some great all viewer friendly content. Thank you for your video and I'm sorry these people are so entitled to their not existent imagination.
I concur
Yes it is good to repair broken things instead of tossing them in the trashcan. But it is a waste of time being clueless how to do it. A thin sheet of alloy will turn into ash if it gets in contact with a flame. You can weld alloy but first you need a gas shielded welding machine and second the training how to use it.
Goes to show you that even the worse of ideas can fool, some people.
When you have time on your hands, heck anything is possible
Lavorare in questo modo è assolutamente da folle indipendentemente dal risultato.
L'archétype du mauvais bricoleur. Toutes les étapes sont soigneusement foirées. Ça tient du génie !
Mil gracias Dios te bendiga🎉❤❤❤
Hola nuevo amigo, un amigo lleno de amabilidad y cortesía, ¡deseo que siempre seas feliz!
I was shaking my head throughout the video saying “that’s not going to work just sleave them together or buy a new one “ . The blow torch was fun though .
Carburetor torch 😆
I think that most of de comments are from people that didn’t see the end of the video 😊
I'm very grateful to you for watching and understanding the message I want to convey
@@GausDIY They might have lost the will to live before you threw your attempted repair into the trash bin. May I suggest you do the same with your camera and prevent us all WASTING our time too.
😂😂😂😂😂😂😂😂 thank you very much 😂
Welcome 😊 😁😁
the duct tape method as you did it does not take into account the fact that the image is mirrored but not superimposable
Jajaja excelente video..... Y lo seguí hasta el final jajaja. 😅😅😅😅😅😅
jaja, deseo que usted y su familia estén siempre seguros y felices. ¡muchas gracias!
Perfect 👌
Thank you! Cheers!
If you got that right, I'd be blown away. Good effort. 😅
What a bungler! A new one is cheaper than parts and time!
The comment section is the best part !
هل السائل نفط او بانزين وماهو المحرك الدافع للهواء حقآ فكرة اعجبتني ❤
هذا السائل هو البنزين، شكرا لك!
Buenas.tardes estoy viendo el video desde Chile...
Ok I’m already 50% stupider when the glue gun came out
Hola, soy el señor ingeniero veterano , he aprendido mucho … Gracias por todo
Me vuelvo a mis asuntos de ingeniero veterano
😅
Bueno, gracias amigo divertido y humorístico. Deseándote siempre felicidad y buena suerte en la vida. ❤️
I’ve been in the motorcycle industry since 1981, NOBODY WELDS LEVERS.
What a ridiculous waste of time
Col tempo che hai impiegato e il costo di una nuova faccio prima a comprarla
I'll never get back that time
Great gasoline torch tool educational video . Too bad that thing didn't weld . At first i thought that was pee in the bottle .
It must be gasoline and a fish tank air compressor . The aur bubbles through the gas and the second and third bottle catches dirt and droplets .
Eso lo hice hace años y mi moto no pasó la ITV, me dijeron que pusiera una nueva
Ya hace muchos años que dejamos de chupar el dedo. 😂😂😂
If it broke once, it will break again. But a new
One.
I enjoyed this video.. I'll be waiting for next video .. i,e. Fixing a Broken heart.. 😢😢
Hello Bro! Wishing good things always come to you
Great idea❤❤❤
Thank you! Cheers! 🤩
Fantastic that’s exactly how I would do it
Ich kann vor lachen nicht !
idée intéressante mais vouée à l'échec 1: une soudure cela se prépare avec des surfaces de contact propres, sèches, brossées afin de pouvoir se contacter avec l'apport de soudage.2:une poignée en aluminium ne sera pas soudée avec un apport de plomb ou d'étain ce n'est pas compatible et surtout la soudure alu se fait sous vide d'argon.3: le report que vous avez fait avec le scotch est bien pour la première partie mais vous avez pour la seconde juste copié et décalé le scotch sur la partie de droite or il fallait retourner le scotch pour qu'il corresponde au profil opposé.4: il suffisait de percer comme fait sur les 2 morceaux et fileter chaque élément en insérant une tige filetée de vis et serrer l'ensemble avec de la résine époxy qu'il suffisait de poncer ensuite pour obtenir un bon résultat.5 Pour bien souder il est utile de bien chauffer les 2 parties à souder si vous voulez que l'apport tienne. Si vous ne chauffez que l'apport aucune soudure de se fera et l'apport fondra et tombera au sol. Sinon un bon point pour le montage du chalumeau.
Merci de partager vos connaissances et votre expérience. Je vous souhaite, à vous et à votre famille, une bonne journée !
Elmer's WOOD glue, BAM, and your done
Saludos desde Venezuela.
Or just make 2 splints out of anything strong enough and bind on tight with paracord....take 5 minutes 😂
This is fucking hilarious
Fastest fast forward ever attempted by me.
Düşündüm ki,yeni nə isə öyrənərəm.Boş yerə vaxtımı sərf elədim.
तुम्हारे लिए अच्छा बिजनेस है वेरी गुड
धन्यवाद आपका दिन अच्छा है!
I drill a hole and use a roll pin with JB weld.
Ok friend, that's good idea
The best part of this entire video is the last 10 seconds. What a complete waste of time.
Der Titel müsste eigentlich heißen: *Der Stümper im Dienst*
Hallo Herr, vielleicht sind unsere Fähigkeiten nicht sehr gut, aber wir versuchen jeden Tag, uns zu verbessern. Vielen Dank und wünsche Ihnen viel Gesundheit und Freude ❤️
@@GausDIY Danke für die Rückmeldung. Aber wenn man schon Misserfolge hat, dann sollte man diese nicht auf CZcams setzen. Denn man hat keine Freude so einen Murks zu sehen wie hier. Gründe hab ich ja angegeben.
So ein Werkstück, was zerbrochen ist, muss man mit einem richtigen Schweißgerät schweißen. Und da bedarf es auch den richtigen Schweißvorgang, daß auch das *Innere der Bruchstelle* vollkommen sauber und korrekt verschweißt ist. ----- Aber so, wie Sie das von Anbeginn mit den Tesafilm machten, und dann mit einer präparierten Schraube Löcher bohren, wo die Schraube hin und her eiert und ein zerbohrtes Loch hinterlässt, wo das Gewinde keinen rechten Halt findet, so wusste ich bereits im Voraus, daß es nur Murks wird.
Und das mit der Aluminiumhülse der Batterie war ja der Gipfel. Eine Aluminiumfolie zum Schweißen eines Stahlwerkzeuges zu verwenden, war ja des Höchste! -- Haben Sie das nie erfahren, daß man für Stahl auch einen Stahl-Draht verwenden muss, um Stahl mit Stahl zu verscheißen?
Als ich das sah, wie Sie das Aluminiumband auf den Stahl drauflöten wollten, wusste ich schon *im Voraus,* wie das Aluminium von dem Stahl abperlt. ------------ Man zeigt doch keine Misserfolge. Oder?
Ich würde Ihnen empfehlen einen Schweißkurs zu machen wenn Sie wollen.
@@norbertk.1473 Ja, mein Video hat zwei Hauptinhalte: Der erste ist, wie man eine Taschenlampe mit Benzin herstellt, der zweite ist, dass Sie keine Werkzeuge verwenden sollten, die Ihre Sicherheit betreffen, wenn Ihre Fähigkeiten gering sind. Durch das Video werden Sie die Schwierigkeit verstehen und technische Anforderungen, die zum Löten eines Werkzeugs erforderlich sind (Hinweis für Personen, die nicht über ausreichende Fähigkeiten verfügen: Sie sollten dies nicht tun, um Zeit zu sparen. Wenn Sie sich das Video ansehen, dauert es nur 14 Minuten und 39 Sekunden, aber wenn Sie Reparaturen durchführen, kann dies länger dauern. ) Vielen Dank
I was gonna call you a idiot but since you threw it in a garbage I think you're smart.
Ok Friend! Have a good day!
जहां यह नया नहीं मिलता है ऐसा कोई गांव हो या जंगल हो उसमें यह मेहनत करना जरूरी है....
С ЭТОГО НАДО БЫЛО НАЧИНАТЬ 👍
😂😂😂😂😂😂😂😂😂😂😂😂 JUGARON CON MIS SENTIMIENTOS😢😢😢😢😢😢😢
From Argentina
Hello friend from Argentina. Have a good day!
Do you sell airtime... you will impress more people..
That was a long road that leads to the Dustbin !