Great looking truck. I put some cut down springs from a pen on the stock shocks over the shock shaft. They act like overload springs to stiffen the suspension up in the front. Works really good.
Thanks! I just ordered one yesterday, and im blown away by how much stuff/upgrades they have for these. You can find get metal drive shafts for these, as I’ve ordered mine at the same time. I’m also going to add a new motor, differentials etc. Good job by the way. Your truck looks AWESOME!!! I will also be doing a review video soon, as my truck should be arriving later today.
You can use the mn90 links. Going from 1/8 inch to 1/4 i made my wpl bruchless. With 2spees locked un sec gear. And used a 1/10 scale streeing servo. .
Sweet looking C14 dude... you've made that yellow colour work fantastic with the styling mods 👌 love it! ❤👏🤘 you can get metal heightening brackets but then you'll have to start cutting bodywork and have less room for the esc 😬 I run the 30A WPL in my 2 speed C14, using heightening brackets. Its on my channel if you wanna check it out 😜💕
Sweet looking rig . There are link in the comments on my wpl c54 video to the upgrades i used. My wpl c54 uses the same chassis as yours 😊 czcams.com/video/9ZcrRJcri-w/video.htmlsi=LC1OmHbbaxXA6DjW The mn 90 square metal links are the way to go and a direct fit to
Great looking truck. I put some cut down springs from a pen on the stock shocks over the shock shaft. They act like overload springs to stiffen the suspension up in the front. Works really good.
Nice! Thank you.
Thanks! I just ordered one yesterday, and im blown away by how much stuff/upgrades they have for these. You can find get metal drive shafts for these, as I’ve ordered mine at the same time. I’m also going to add a new motor, differentials etc.
Good job by the way. Your truck looks AWESOME!!! I will also be doing a review video soon, as my truck should be arriving later today.
i think if you could just put a weak spring on those shocks, it would raise it up enough to keep it from hitting that gear box on the rocks.
Yes I like that idea.
Great info I've just finished my c24 and cutting is nessary no direct fitment and change screws to fine thread with metal upgrades
Thingverse Has a plate to raise the transmission up
I’ll have to look into that.
👍👍👍
Yes!
Amazon or eBay sells metal drive shafts that should fix your problem also I recommend to get longer adjustable links!!!
You can use the mn90 links. Going from 1/8 inch to 1/4 i made my wpl bruchless. With 2spees locked un sec gear. And used a 1/10 scale streeing servo. .
Love them wheels, what are they?
Rc4wd steelies.
For the esc did you add additional transmitter? What controller are you using?
Nope. Just running the stock radio that comes with the scx24
Sweet looking C14 dude... you've made that yellow colour work fantastic with the styling mods 👌 love it! ❤👏🤘 you can get metal heightening brackets but then you'll have to start cutting bodywork and have less room for the esc 😬 I run the 30A WPL in my 2 speed C14, using heightening brackets. Its on my channel if you wanna check it out 😜💕
Thank you! I will check it out.
Hey mate do you have a link to the axle brackets, shocks and shock mounts?
I don’t. I found them off eBay. Just type in WPL c14 aluminum parts. It should pop up. They were generic no name parts from china.
Cheers thanks dude.
also what shocks are those called? and do you have a link for the shock towers?
I don’t have a link. They shocks are also no name brand. I found them off eBay. Just type in WPL c14 shocks and they should pop up.
@@Moneypit__RC ive been trying to find them for ages but still nothing
I think @smallscaleadventures did a skid conversion he's on CZcams
I will have to look into that! Thank you.
Wat radio u useing with esc in one
The stock v2 transmitter from scx24.
what tires and rims are they?
Little guy racing parts trail king tires. And rc4wd steel wheels.
What size tire are you using?
They are 64mm tires.
@@Moneypit__RC thankyou for the info
What about the wheel weights?
I didn’t add weights. Just the steel wheels
Sweet looking rig .
There are link in the comments on my wpl c54 video to the upgrades i used.
My wpl c54 uses the same chassis as yours 😊
czcams.com/video/9ZcrRJcri-w/video.htmlsi=LC1OmHbbaxXA6DjW
The mn 90 square metal links are the way to go and a direct fit to
That’s awesome!
If you can't print onehit me up and i will print it and ship to you