First, don't see them anymore for sale from your link Then can anyone help as when I check online, all sites say the right number for my GMC Yukon Denali 2003 that seems similar to yours, should be 9005 but a lot of YTers have installed 9006 bulbs instead of 9005!!! Why is that and won't it cause a problem down the line?
These things are to fucking bright. It's like having on high beams. When a car is coming towards you with those in it, it's like they have on their bright lights. They should be banned. F ridiculous.
Lot of that comes with someone not angling them properly and not using HIDs in a clean projector housing. I learnt that from experience. After I got my 55w morimoto mini h1 projector lights which were custom designed for HID/Bi Xenons retrofitted into my 2007 OEM Ford Mustang assembly’s and angled them properly there was little to no glare to other drivers, and no one flashed high beams at me anymore.
I am glad that I am not the only one who gets really annoyed with these amateurs. Yes its brighter FOR YOU but rest of us are blinded by your botchery. And when you pass someone with those lights, you are screwed because it takes more time for your eyes to adjust to dark.
So I have an 06 Denali and i tried a different brand of l.e.d and not only did it trigger a check engine code but they would often not both come on at the same time when turning them on. I read these trucks have issues getting enough power to turn the led or hid but you didn’t mention any such issues with yours. Did you do anything beyond what was recorded or were they really just plug and play like demonstrated? Thanks and keep the vids coming love your Chanel.
Nothing else was done on mine. They literally just worked by plugging them in. Is it possible you snagged another wire or connector replacing yours that could for instance pull out anofher harness and trick the ecu into throwing a code. I know as the cars get newer more and more gets integrated into the harness. But its hard to believe the lights could cause the check engine code to come on.
Thousanddollarcarguy oh yeah for sure I have! But I’ve been following the Yukon a lot closer obviously because I have one and I’m amazed you found one in that good of shape for that much 😮. And no I didn’t damage anything because the next morning after taking out the Hid’s the codes were cleared, could of been a separate issue and a coincidence though. I’m going to try out the bulbs you bought and hope for the best. If not maybe it’s a harness issue 🤷🏿♂️
9004 is meant for the low beams. They have a black cap on the end of the bulb, spreading the light sideways and out of the housing. 9005 has no cap on the end of the bulb, giving it more forward and focused punch. This matters more for non-projector lens types. His yukon, having a projector low beam, uses 9005 bulbs for both.
Weird thought. Can you snip the wires and reverse them? Ive seen where others came in reversed because they use the same connector on different models but the positive and negative and reversed on other models. Let me know how it goes please!
How you doing i got a 2005 yukon gmc slt and it came with hid setup i ordered some led bulbs amd just wondering how to install and take hid out .it had the connector plus to more small connector red and blue color on wires
Swapping headlight bulbs in these is super easy. Probably a 2 minute job. Just pull the headlight assembly rods that hold the light in Remove the whole light assembly then rotate the old bulbs out. Simple as that
@@thousanddollarcarguy my thing is the hid wiring set up it has do i remove the red and blue connector wires and leave the one main connector where i can just plug the led bulb?
@@TheRADITOelPADRINO that should be how it works Just unplug one bulb and plug in the other. The only thing that could cause a problem is if someone wired in a bulb thats not supposed to be in there and would have a different connector. Butbi highly doubt thats the case. Should just unplug and plug back in.
@@thousanddollarcarguy ok ima retry it do you have like a email i can foward you my pictures of truck wiring so you can tell me because i tried turning on when plug amd didnt do anything but i could be doing something wrong
@@TheRADITOelPADRINO thousanddollarcarguy@gmail.com. im no expert but ill try to help out. Also i have a normal job so it may take me a bit to reply please be patient
Tx for the video - ordered same bulbs as you for my 2004 Yukon Denali (after a false start with another set of bulbs that did not fit - VOROCK8 from Amazon). Additionally, have you replaced the fog lamps and the high beams with LED bulbs as well? If so what bulbs did you use???
I didn't replace the others, i wanted to, but i ended up selling the yukon recently. My friend has the lower fog lights done, ill ask him and try to get back to you.
Thousanddollarcarguy the end clip was totally different. The link took me to the 9003s when you need 9005 and 9006 on these I believe. What I ended up with had a weird 3 prong plug and the end
@@SilkandScrooge Sorry for the mix up. A little strange that others didn't say anything. I know it sounds strange but i wonder if the manufacturer updated there listing and that changed it? Otherwise my appologies, ive updated the link in the description to match the one you purchased from. Thanks for the heads up. Feedback from viewers like you help me and everyone else. Much Respect.
Thousanddollarcarguy respect back. I should have checked before buying. Just kinda figured the link would be the ones and didn’t even check haha I was looking forward to trying these things out. I could tell they seemed very well made from the ones I did receive. How are they holding up?
Not for OEM style Projector assembly’s for the Denali model. (Which you should technically use with HIDs, never use reflector assemblys, they blind other drivers). Because the Denali is the only trim to use projector assembly, they are much harder to come by. I managed to order a pair of oem style projectors off of Amazon for about 147$ and none of the junkyards arround here have OE style projector lights for the denali
Why not clean the lens while you had them out? You'll never see the potential of those bulbs with the lens so dirty.
Headlight lense restore needed stat!
That headlight design is so nice. Just slide the pins out...love it on my tahoe
Should be in stall in fog light ??( so it’s do not blind the traffic??
I always love the Yukon updates. Going to put them on mine. Try buffing compound on the headlight lenses. They work magic.
Use Deep Woods off instead of buffing compound. It works magic.
some wet sanding and buffing would be your headlight's best friends
In Florida, sticks bite you.
First, don't see them anymore for sale from your link
Then can anyone help as when I check online, all sites say the right number for my GMC Yukon Denali 2003 that seems similar to yours, should be 9005 but a lot of YTers have installed 9006 bulbs instead of 9005!!! Why is that and won't it cause a problem down the line?
9005 are high beam bulbs 9006 are low beam bulbs
I hope to see the interior restoration.
This truck was sold over a year ago so....its probably not gonna happen
Plzzz update on the youkon
Thank you this helped me so much sir I really do appreciate it
I installed LED fog light bulbs on my 2010 Ford Explorer 4X4 V8 XLT and I am still on the fence if I am going to install LEDs for my headlights, etc.
Bro did you try the led on your lens ? Are the better than the HID xzenon?
why
Replace all the front headlights too faded
These things are to fucking bright. It's like having on high beams. When a car is coming towards you with those in it, it's like they have on their bright lights. They should be banned. F ridiculous.
Lot of that comes with someone not angling them properly and not using HIDs in a clean projector housing. I learnt that from experience. After I got my 55w morimoto mini h1 projector lights which were custom designed for HID/Bi Xenons retrofitted into my 2007 OEM Ford Mustang assembly’s and angled them properly there was little to no glare to other drivers, and no one flashed high beams at me anymore.
I am glad that I am not the only one who gets really annoyed with these amateurs. Yes its brighter FOR YOU but rest of us are blinded by your botchery. And when you pass someone with those lights, you are screwed because it takes more time for your eyes to adjust to dark.
That's weird. They wont fit in my 04 Denali because the windshield washer reservoir is in the way.
So I have an 06 Denali and i tried a different brand of l.e.d and not only did it trigger a check engine code but they would often not both come on at the same time when turning them on. I read these trucks have issues getting enough power to turn the led or hid but you didn’t mention any such issues with yours. Did you do anything beyond what was recorded or were they really just plug and play like demonstrated? Thanks and keep the vids coming love your Chanel.
Nothing else was done on mine. They literally just worked by plugging them in. Is it possible you snagged another wire or connector replacing yours that could for instance pull out anofher harness and trick the ecu into throwing a code. I know as the cars get newer more and more gets integrated into the harness. But its hard to believe the lights could cause the check engine code to come on.
Also. Thanks for watching! Im very happy to get the views. Have you been keeping up with the miata kart build?
Thousanddollarcarguy oh yeah for sure I have! But I’ve been following the Yukon a lot closer obviously because I have one and I’m amazed you found one in that good of shape for that much 😮. And no I didn’t damage anything because the next morning after taking out the Hid’s the codes were cleared, could of been a separate issue and a coincidence though. I’m going to try out the bulbs you bought and hope for the best. If not maybe it’s a harness issue 🤷🏿♂️
@@applepudin keep me posted
what is the difference between 9004 and 9005 bulbs?
9004 is meant for the low beams. They have a black cap on the end of the bulb, spreading the light sideways and out of the housing. 9005 has no cap on the end of the bulb, giving it more forward and focused punch. This matters more for non-projector lens types. His yukon, having a projector low beam, uses 9005 bulbs for both.
@@patlager2110 Thanks a lot for this clear description. It makes full sense now.
Hey brother, I ordered these after watching your video for 05 gmc Yukon and it doesnt work do I need to add a balis or something?
Weird thought. Can you snip the wires and reverse them? Ive seen where others came in reversed because they use the same connector on different models but the positive and negative and reversed on other models. Let me know how it goes please!
How you doing i got a 2005 yukon gmc slt and it came with hid setup i ordered some led bulbs amd just wondering how to install and take hid out .it had the connector plus to more small connector red and blue color on wires
Swapping headlight bulbs in these is super easy. Probably a 2 minute job. Just pull the headlight assembly rods that hold the light in
Remove the whole light assembly then rotate the old bulbs out. Simple as that
@@thousanddollarcarguy my thing is the hid wiring set up it has do i remove the red and blue connector wires and leave the one main connector where i can just plug the led bulb?
@@TheRADITOelPADRINO that should be how it works
Just unplug one bulb and plug in the other. The only thing that could cause a problem is if someone wired in a bulb thats not supposed to be in there and would have a different connector. Butbi highly doubt thats the case. Should just unplug and plug back in.
@@thousanddollarcarguy ok ima retry it do you have like a email i can foward you my pictures of truck wiring so you can tell me because i tried turning on when plug amd didnt do anything but i could be doing something wrong
@@TheRADITOelPADRINO thousanddollarcarguy@gmail.com. im no expert but ill try to help out. Also i have a normal job so it may take me a bit to reply please be patient
Did you ever find out which fog lights matched up ?
Sorry i have bot
For your gmc ?
@@jonb1988 correct. I never looked them up since i sold the truck
Tx for the video - ordered same bulbs as you for my 2004 Yukon Denali (after a false start with another set of bulbs that did not fit - VOROCK8 from Amazon). Additionally, have you replaced the fog lamps and the high beams with LED bulbs as well? If so what bulbs did you use???
I didn't replace the others, i wanted to, but i ended up selling the yukon recently. My friend has the lower fog lights done, ill ask him and try to get back to you.
Pretty cool but u need new Headlights
Did u lift it at all or is it stock stance?
I believe its all stock
Need new headlights first
Alittle pissed before I ordered the ones you put a link to and they are the wrong ones😑
Wrong as they didnt fit? Or didnt work? They are literally the ones i used in the video.
Thousanddollarcarguy the end clip was totally different. The link took me to the 9003s when you need 9005 and 9006 on these I believe. What I ended up with had a weird 3 prong plug and the end
www.amazon.com/dp/B07G6XMT3S/ref=emc_b_5_mob_t
@@SilkandScrooge Sorry for the mix up. A little strange that others didn't say anything. I know it sounds strange but i wonder if the manufacturer updated there listing and that changed it? Otherwise my appologies, ive updated the link in the description to match the one you purchased from. Thanks for the heads up. Feedback from viewers like you help me and everyone else. Much Respect.
Thousanddollarcarguy respect back. I should have checked before buying. Just kinda figured the link would be the ones and didn’t even check haha I was looking forward to trying these things out. I could tell they seemed very well made from the ones I did receive. How are they holding up?
How much price please this LED
They are usually around 30$ for the set
@@thousanddollarcarguy thanks
Need new housings 😂
Buy new headlights, a pair is less than $100.
Not for OEM style Projector assembly’s for the Denali model. (Which you should technically use with HIDs, never use reflector assemblys, they blind other drivers). Because the Denali is the only trim to use projector assembly, they are much harder to come by. I managed to order a pair of oem style projectors off of Amazon for about 147$ and none of the junkyards arround here have OE style projector lights for the denali
Hid are brighter than led
Did you try it ?? Cause i want to see if the led better or not
First
High beams?