Giant $7000 RC Boat Pushes for 100mph! "Push The Limits" Mystic 5000 Off-Shore Speed Boat
Vložit
- čas přidán 28. 03. 2023
- Find out more at Ultimate RC Events CZcams channel: / @radiocontrolledevents
Power system used: www.mgm-controllers.com/
Ultimate RC Events Website: www.ultimaterc.com.au/a/Ultim...
00:20 Intro
05:10 Boat Setup
10:37 Prepping for the run
13:45 Fast passes
18:05 Final summary
Aussie RC Playground Instagram: aussiercpla...
Aussie RC Playground Facebook page: / aussiercplayground
Intro done by IkONz RC: / abemvp100 - Auta a dopravní prostředky
Kayaker: Sure is a nice peaceful day on this beautiful lake... 2 mins later a screaming surface missile zips by at 'danger to life and limb' speeds.
Haha, no lives or limbs were harmed during the filming of this video. 😁
😂
WOW, what a mechanical beauty!!! That build though...i really hope you show more of this boat!! Please meet with Blair on another day, flat waters and sunny skies, would really like to see more of this masterpiece. Thank you Vas and especially Blair for sharing this on the channel.
You're most welcome, thank you for stopping by. 👍🙂
That´s some serious good looking boat. So beautiful to watch and enjoy the build and the action in the lake.
Nice one Vass, thanks for getting this bloke & his boat on the channel.!
No worries, thanks for watching. 😎👍
An Extremely smooth & fast boat!!! Very nice!
A masterpiece, thanks for posting.
awesome, thanks guys
WOW! That is the most insanely awesome RC boat I've ever seen! What a great build. It's so smooth on the water an sounds amazing. Thanks Vas for showing us this beast!
Thank you very much for stopping by. 🙂👍
Wow , what a great boat Vas. Blair has done a great job building this . Sounds amazing. The speed will be more than 100 mph easy. Twin 12s unbelievable, you made my day thanks Vas.
That is the nicest Mistic 5000 build I have seen. I have the Fighter Cat Cheetah hull with twin screws. I was able to get a 102 mph pass in 2021 with it. I was sh*tting bricks prying it would not catch air and flip. Great job capturing footage of your buddy's beautiful beast!
So good! Thank you for providing us with this. I have many different RC vehicles and know others may think the same as what I initially thought... That RC boats may get boring.... Well ... When I got my first RC boat that thought process changed, the RC boat provides so much fun, excitement, rush and ever healthy fear. It's something that you have to experience to understand. FYI I have X2 RC boats, x4 RC cars, X3 drones.
You need some planes, next. 😉
Thanks for stopping by and glad you enjoyed the video. 🙂👍
Thanks for sharing that man. It's amazing 12 of us on each motor
what amazing video!!!! Awesome!!! what a beauty!!!!!
Fantastic, I've always wanted to see inside one of those big speed runners.
Glad you enjoyed and thanks for watching. 😎👍
Hi, I had been re-watching RC Boats now after 40 years when I built mine. I am mostly in RC Cars, trucks, drones were started with DJI but my stroke screwed me from looking up, so just below now. A new boat 3 or $400 to start again. I had to mention your boat seemed really good and speed oh YES... Thanks!
Beautiful boat in appearance and performance! 👏👏👏👍🏼
Thank you. 😎
A great boat. Great to see.
Crazy 👍 beautiful boat. Cheers from Switzerland 🇨🇭
Thank you for stopping by. 😎👍
Nuts. That thing is a beast. Reminds me of those crazy onroad speedrun guys with their 24s monsters.
" a separate BEC". 10/10
Nice man love it👍👍
Thoroughly evil setup. Water cooled ESC's and motors...that's a new one for me. 👍👍👍👍
It's fairly common in RC boats actually.
Nice video on the RC boat what a good afternoon has fun 😀and good 👍to see a videos 📹 from you 😀😊
Thanks 👍
If more people got into RC of any kind, we’d have world peace. Cool boat! Great video 👍
Thank you. 😎👍
Sweet ,sick boat
WoW, thats absolutely insane Vas - i wanna boat
This boat deserves a bigger body of water. It's begging for it.
Flipping heck that's massive and fast as hell 💪💪👌👍👍😎😎
Cheers guys
So nice boat
SWEET ride!!
Thank you. 😎
Nice! That thing is sick!! What size/AWG wire are you running to the ESC's and motor lead's?
Also what type of battery connector is that? Looks somewhat like an XT60, but an upgraded version maybe?
impressive engineering..only the sea would not look like a bathtub!!:-))
Yeah, we need a bigger lake. 😁
Magnifique 😮
That is awesome
Insane cool! 😂❤
Imagine how fast that system could push a custom built rc car of the same size on land. It would be totally insane. That boat is totally insane. Think about this, 90% or more of boats you can buy and ride on can't go anywhere near that speed. Most can't do half that speed.
There is a 20s MGM Losi 5T2.0 online
Fantastic 💯👍
Thanks ✌️
20yrs ago I built a 50 mph Systems cat with a brushed motor and 60 volts of nicad packs. It would barely float but big fun.
Nice setup for sure ! what Props are you running they work extremely well
Great hobby I had a v hull with a 25cc weedwacker motor in it . Didn’t go anywhere near a 100mph but it was a lot of fun
Goes like a Bloody Rocket , Xcellent
Really nice boat bro
Cheers. 😎
Thats 1 sexy bost. Just too many dollars for me. Nice driving and it looked like a few saves from the shore. Well done mste!
Thanks, appreciate you stopping by. 😎👍
Sickening
Awesome 😎
Thanks Alan, glad you liked it. 😎
It needs a bigger Lake, beautiful machine.
Sweet!
For the cables.... have you thought about using water for lube? Pressurized water is side fed into stuffing tube and rotation of cable pumps the water to rear towards the strut. Saw it years ago put into use by a gentleman from Japan in the U.S. gas nats in 2007. We had a really hard time prounouncing his name ... we called him “H”. His rigger was a a monster on the course. He did lube with grease after runs as well.
Hello sir. I'm just wondering , can a module holding all components excluding the props be possible? Like a control pack holding motors ,batts..ect. a sort of box that clips in tightly into boat then attach water supplies and insert the props n shafts the same as you already do.
Beautiful ❤️, you need a camera onboard this 😊
Damn!!! That thing is epic!! So smooth and the sound is something else!!
If I'm not correct, please correct me, aren't those MGM's and LMT motors capable of 15s each?
Expensive hobby but again it's Blair's work/business so......lol.
Awesome you showed this beast on the channel Vas...Cheers!
Thanks Steve. I'll have to ask Blair if he knows what the motors can take, but it's possible they can run more power and I wouldn't be surprised given what they cost.
What's the links or website to look into obtaining a watercraft like this, very beautiful craft!
Cool wish i could afford one , Got a Nice little Lake down the road
I seen the black panther that has been spotted throughout the Yarra valley not to far from where you are standing around october 2019 late at nite I was with a friend who saw it to I was reminded when I recognised the lake there anyway nice boat mate and don't go boating at nite there guite a few people have seen it in Lilydale area
NIIIICE 👌
Thanks 🔥
That Hull is manufactured looking at that layup was a combination of Kevlar & Carbon Fibre Combination Weave . The Kevlar was the Yellow/Mustard color part of the fibre weave . And yes Kevlar is used in Bullet Proof Vests
You definitely got your moneys worth and the water cooling is awesome I know speed controlers can get hot I've melted a few on my buggy
Thanks Rob. Yeah, cooling is very important with these aquatic missiles. 😁
U said u built this Rig on the cheap @ just over $7k ..does that equate 2 a slower top end speed . Think u said it's top speed is 200ks ?
Awesome job 👏
Is maintenance high ? Like way u look after Ur prop sharft / propellers .
Building custom boats is not for everyone this guy just broke it down for you instead of trying to figure it out if your new. Great video
Thanks, glad you like it. 😎👍
Nice BOAT, but have you seen the twin turbine version..
Hi, may I know how much the two motors and regulators cost for the whole boat?
What about the new sharrow propeller design?
Running wet. Need to loosen it up some. Sorry if I missed it what KV are the motors? Nice cat.
Thanks. Motors are 840kv. 🙂
Awesome boat, would love to see that beast on a good long straightaway run 🔥
Very nice, what KV motors are you running, and RPM under load?
Motors are 840kv. 🙂
@@AussieRCPlayground so, make the math: 44 Volts x 840kV... 37000 RPMs. My little one, MHZ Mystic 114 cm, revs at about 48000 RPMs under load. Powered by two MBPs 4050, 2350 kV on each 6S. GPS Speed was best with ABCs 2 blade props: 169 km/h
Where can you get a boat like that in the lower 48?/
How long can you run with a full battery charge
😮 F E boats 👍👍👍
Wow
I have the 50 inch version of this and am still building up the nerve to go past half throttle.
Probably the sickest cleanest rc boat iv seen!.. And I thought my traxxas m41 is fast!!!!.....😅
Haha, yeah, this makes those boats (including mine) look slow. 😏
That’s probably a pretty accurate weight those packs weigh 2.5 pounds each.looks great was extremely smooth run😎🚀
Thanks 👍
Someone get that man a new hat. Things beat up😂
The minnow mincer, the guppy grinder or the shrimp shredder
should I spend my redundancy money on this ? (previous life experience and house full of RC suggests yes)
Have boat hull for sale in west plains mo area
I thought that 7000 was ridiculous for an rc plane, I was mistaken. This thing is RAD AF
😂2x Sss56114 on 14s goes crazy 😂
Can you please explain why the need to have propellers that run inwards instead of both being clockwise?
I’m working on a double prop boat myself, and I’m not sure why they do this set up.
Cancels out gyroscopic effect and enhances the rudder's effectiveness at speed. I would think...same on twin engine jets, better performance in turns.
@@steveblackbird5174 No. And jet engines are not counter rotating.
You are kind of asking two things at the same time.
What all twin prop boats have, are counter rotating props. These can be spun in and out.
You run them counter clockwise to counter the prop torque which basically keeps the boat in a straight line. If both props were turning say clockwise, the boat would turn to the right when the rudder or drives are pointing straight. In fact, single props boat do this as well, but not as much. With surfacing props as you see here and which is what most fast rc boats run, you also get a paddle wheel effect. This is due to only half the prop being in the water. So while the prop obviously moves the boat forwards, the blades will act as a paddle wheel and try to move the boat sideways. In this situation, counter rotating props are crucial for stability and to avoid the stern from "crabbing".
Now in or out. For moth mono hulls and cats, the most common is to spin the props out. Out means that the starboard prop turns clockwise, and the port turns counter-clockwise. This of course when viewed from the stern. The benefit from spinning the props out is that this creates the most stability. An added bonus is that the boat also comes easier on plane, and it leans nicely into the turns. This makes for a safe and easy handling boat.
Now in on the other hand where the starboard prop spins counter-clockwise and the port prop spins clockwise, creates added lift, especially in the bow. So obviously the boat runs faster as it has less vetted surface. The problem is that now the boat has a greater tendency to run loose, and when you turn, the boat will not lean into the turn as much. The latter can be a big challenge for cats as they actually tend to lean out when the props are turning in. This makes the boat MUCH more prone to rolling if turned too hard at too high speed. Now in a monohull, this is not as much of an issue as monohulls naturally tend to lean into turns, but spinning in still greatly enhances the chance of a spinout or a rollover.
As we say in real world powerboat racing, "Spin them in to win". However, that said unless you are going for that last little percentage and know what you're doing, spin them out. You can gain a few mph, but only if you are spot on with your setup. You will get a much better and probably equally fast boat if you spin them out.
So that's about it.
@@AB-80X As an Aircraft Engineer of 30+ years I know that well. There were tests if I remember correctly by Pratt and Whitney. Proved the theory behind having each engine rotate in different directions.
@@steveblackbird5174 Yes there has been tests, and at least one plane back in the day that featured a set of jet engines that were designed to be counter-rotating. There was the Corvair YB-60 which was basically the Corvair B-36 retrofitted with jets. In modern commercial aviation and in other forms of transport aviation, there are no counter-rotating setups. As an aircraft engineer you know why this is - cost. The gases and air coming out of a turbofan, or turbojet back in the day, changes direction due to the stators, this both counteracts the gyroscopic effect but also the torque steer that might be present due to rotation of the thrust cone. So as you know, it will not make any sense for an airline, engine manufacture, parts supplier, aircraft manufacture or technician to have to deal with the expense and time consumption associated with having mirrored parts for their turbofan engines.
That said, there are a few twin and triple spool engines that are in themselves counter-rotating. However, this only pertains to some fighter jets that rely on this setup for additional agility. The F-35 and F-22 uses such engines, and so does the Pegasus engine found in the Harrier.
But as for modern commercial, cargo, and military aircraft outside of fighters? No. From a practical and financial standpoint it would not make sense as the benefit from a performance standpoint is slim to none.
Nice boat, but why the hell you guys driving it during other people are on the water? Greatings from Germany.
It's a shared space and they moved on after they saw what we were doing. No one got hurt, no one complained and no one cared. 😎
"You're going to need a bigger lake" as they say.
Haha, very true. 😁
Geez, shorten those wires as short as you can, u will get so much more power....👍👍👍
There’s 42” 8s boats that will do 90+ with just a new prop
Pond is to small for this boat. So far I don't see 100. I'm sure it is capable but you need a bigger pond or lake wish you had a GPS so you could show us on your phone. I have reached 100 on my Miss Geico 36 on 6s. But it is a beautiful boat. Love the color.
Not sure if you read the title of the video or took the time to look at the thumbnail, but nowhere in this video does it say the boat reached 100mph. It's also not a pond, it's a lake, and it is big enough to reach top speed, it's just the conditions weren't right and the driver was not willing to push it harder and risk wrecking the boat.
Thanks for watching.
My stuffing tube in my gasboat is full of grease
Is the 7k in USA dollars ?
We're in Australia, so what do you think? 😉
Burning money like it grows on trees😮
What good is money if you can't spend it? 🤷♂️
7000?
Just one rudder servo?? If you need a decent amount of torque like you say then do what the imac plane guys do and run two or three in a gang all tied together!
Fair point, but it's a 75kg servo, so it's not lacking in power.
Thanx for not showing the water pickups. We want to keep that secret.
Are you joking? I literally spent 2min in the video showing the pick-ups. 🤔
@@AussieRCPlayground You didn't turn the boat over. You showed the inside. Not the outside. ???
It's just a couple of holes on the underside, nothing special. And you can sort of see them at one point on the left hand side.
@@AussieRCPlayground Thanks.
You need a bigger lake.
You need a bigger lake!.....Incredibly fast......don't believe you hit full throttle long enough to hit top speed!!!
Where the hell does someone even run an rc boat, all the ponds by me are private or owned by the park system
I think if you can afford a $7000 RC boat, you know someone with waterway access or you also own an ocean-going vessel.
7,000 bucks and no water seal between the top and hull what a waste.
I bet i can get one bui£t on 2 6s so 12s for 500 or under.
Go for it. Good luck. 😁👍
I think the Ukrainian Navy has lost a drone
At that point why go electric just put a real turbine in and call it a day
Haha, don't tempt him, he might just do that on his next project. 😁
LOL for $7000 you can buy a good used life size boat !!!
LoL, yeah, but it won't go 100mph, be remote control or anywhere near as cool, and will probably have a hole or two. Hope you have a good supply of life jackets... 😏
Oh yeah she’s dirt cheap at $1350