Handbrake Cable Installation Alfa Romeo Mito [Sostituzione cavo freno a mano Alfa Romeo MiTo]
Vložit
- čas přidán 28. 08. 2024
- I changed the left handbrake cable of the Mito because the wheel didn't turn freely like the other side. Beside that the brake pads worn out unevenly every time I changed them.
Then there were some noises coming from the back axle whenever I was driving for a long journey, now that I've replaced the cable I hear nothing.
Notice that the left cable (driver side) is slightly longer than the right and have to be installed accordingly.
Thanks for watching and subscribe to the channel.
°Link handbrake cable: ebay.us/EnZuHS
✓Tool required
•Plier bars
•Plier
•13mm socket
•📸 Instagram: AK_Gyamfi_Mods
•Facebook: / ak.gyamfimods
•Email: ghedawolf@yahoo.it
■WARNING: I'm just a normal guy that have a passion of making an interesting mods and repairs on my car and motorbike. If you rely on the information in this video, you are responsible for the results. Have fun and remember that every project you try is at your own RISK.
Thanks
You're welcome
Did the part that goes into the calliper just slide out or is it threaded?
The cable has a knob at the end and it's hooked to the calliper, therefore it slides out.