Rx100/135 Needle Pin lock clip position || Which is best and WHY!!! -- Ep-2
Vložit
- čas přidán 7. 05. 2020
- Hello Everyone, Needle pin of the carburetor is very important component .
This is the 3rd video of the carburettor series which is related to it.
#RX135/100 #NeedleClip . the postion of this needle clip is a very crucial thing while setting the carburetor back and tuning it.
it basically decides weather your bike will be rich or lean in mixture during the main circuit operation, so it has a very vital role during the mid- upper operations.
Do check the video, and stay tuned to the channel for more technical tips ------------and videos related to the motorcycles.
===================================================
If you have not seen rest of the videos of the carburetor series Do watch it from here.
• Rx100 & Rx135 Carburet...
• Rx100 Aur 135 carburet...
REST ALL IS BELOW-
you can watch my videos from the link below :
MY YEZDI :-
1--- • YEZDI 1978 RESTORATION...
2) • YEZDI 250 RESTORED | A...
3) • Yezdi diaries,Forever ...
3) • YEZDI 250 EXHAUST SOUN...
Royal Enfield- -
1) • Enfield 350+ FZ16!BROT...
2) • OLD MODEL BULLET 350,O...
3) • OLD BULLET 350 ON HIL... Link to my rajasthan Ride series
• Rajasthan Series
-----------------------
Link to TECHNICAL playlist ??
• DIY/Motorcycle Works/ ...
----------------_---------------
Link to Yamaha Rx series bikes -??
• Yamaha Rx maintenance ...
music credits-
www.bensound.com
Rides -
• MOTORCYCLE RIDES
FOLLOW ME ON INSTAGRAM - mototravel_xd
MAIL ME AT - abhifor102@gmail.com
====================== - Auta a dopravní prostředky
One of the Excellent video ever found in youtube regarding rx carb
Thank you, 🙏
Very useful information for low acceleration and high acceleration. In simple words :
5 slots of pin are given,
In race = put the pin slot in the bottom.
In idle = put the pin slot in the top.
In average ( i.e.- not low or high ) put the pin slot in the middle in 3rd slot.
Amazing quality and very educational!! Subscribed to you. Keep the good stuff coming!
Thank you for all your support ♥️
❤❤..correct answer.this is the theory which i was searched for.thynk alot. with well explaination
Sir, it was a excellent video. Thanks a lot. Have a nice day.
Nice breather 🎉🎉🎉 l am from Ethiopia. Tank u for your Sher your experience ❤❤❤
Lots of love & Thanks Bhaiya❤❤❤❤
Sooo beautiful soo elegant just listening wow wooww wowww..crystel clear explanation...❤❤❤❤...nice broo...great information for rx 100 biker's thank you
Nice explanation and very proffessional
Thank you bro your information..it was gift for me in this lockdown :-) keep it up brother...
Happy to hear that..
Too good really helpful 👍👏🏻
Excellent brother .. you have given lot of knowledge which is means a lot to me n my rx Thank you.
Most welcome brother..glad to know that it helped 🙏
Very good information. Thanks alot
One of the best video good luck 👍
Bro ur the RX god in this earth 🔥🔥🔥..never seen such an intresting and detailed information video..hope u make still more videos like this on Rx...Love frm Andamans❤❤❤
thank you brother
very critical and useful info!! Thanks buddy!!
Glad it was helpful!
❤️❤️❤️ Bro really appreciated 🙏🙏🙏
Well explained . Thank you
One of the best video 👌👌👌🙌
Very informative video thank you
Very very helpful. Thanks God bless you
Extremely nice ...i looking this vedio .. thankyou so much bro🎊🎊🎊🎊🎉🎉🎉🔥🎉🔥🎉🔥🎉🎇🎇🎆
Most welcome 😊
Praaji tussi samjaate bada accha ho , great hai ji , informative hai 👍👌
Thank you bhai, happy to know that informative hai 💐
i have semi port so is it ok to increse needle to rich will i get more power
Excellent explanation bro😊
Thank you 🙂
Excellent accurate Information
THANK YOU BHAIYA FOR LIGHTING ....💖💖💖💖💖💖💖💖💎💎💎💎💎💎RX💯
Bro 1983 model Bullet which slot i put this clip in needle?
Great explanation
Glad it was helpful!
Super sir clearly u say.. but one doveit why and can we put in second line of thread needle please sir tell 🙏.
Good video. Thanks.
Glad you liked it!
Bro your videos good and useful. Keep going bro.
Glad to know that bro..definitely will keep contributing 🙂
Superb video bro!🙌
Thank you brother... 💐
Sir rx100 bike ke jeniune part khan Mil sakte h
Rx 100 Ka light badhane Ka koi tarika hai ky plz reply
1 number bhai
I love your English dear elder bro
Good, informative video.Please advice on fluttering problem if possible.Thanks
Thank you... Taking note of your query, will soon make a detailed one about it
Thanks bro ❤
6:15 race - top (top slot or ?), i don't understand, i have rx 135 4&5 speed, so i can beat the 4 speed, its amaze me..
Thank you for precious your video.👍
❤ superb
Thanks 🤗
Bro 5speed chain sprocket vs 4 speed change sprocket video bana
Bro super🥰🥰
Excellent video! My Yamaha DT100 has an aftermarket expansion pipe. Should I adjust the needle position for the aftermarket pipe?
Thank you Graham
You'll have to go step by step.
As Expansion chamber needs carb returning,sometimes re-jetting or even a carb swap to a higher level.
- Re-tune the carb after fitting chamber( compulsory)
If runs good then fine..
Then go for needle slot adjustment .. seee the response and then adjust the air screw again.
All depends on how satisfied you're with the performance.
Very helpful boss
Thank You ,glad that it was helpful.💐
Super bro
My rx100not starting..
Your handwriting is as good as your clear crisp way of explaining things. Thank you. If you can throw some light on the following trouble. Recently I installed VM26 carb on my RX135 (4-speed cylinder 5 speed gearbox and sprockets). It has 130 main jet 22.5 pilot. The bike runs fine at low to mid RPM range, may be even I notice little better performance in those RPMs, but once I blip open the throttle, the engine just behaves like it has been starved of fuel, but obviously more fuel should be the reason. So I changed stock CDI to single map racing CDI hoping to correct the issue. Air filter is UNI. My bike currently in running-in period so I couldn't open the throttle too much, but after the breakthrough, will the mods give better mid and top end performance? I'm not concerned about the fuel average.
Thankyou for appreciating the work,and detailed write-up 👌
AFAIK, VM26 has some 200+ size jets, you've got it lowered to 130.. well that's good, but not enough to match the need 4s cylinder with 26mm venturi . It's running lean. ( check the plug ).
Up jetting may sort the problem, try switching to 165mains( rx1354s) and see the result.
Another suggestion from my side, don't forcible go on high rpms,when you are unsure about the mixture that too under run-in period.
Share some pics of plug on my instagram moto_travelxd
Switch back to stock cdi and fix the problem one at a time..else it's gonna be a mess.🙂.
You already have 3 unsettled mods
Carb, jet and Uni and 1 unsettled engine😉
@@MotoTravelRide Ha ha true. It's three much at a time. Yes as per my limited knowledge the VM26 has a main jet size of 210, but when I opened I noted that it had only 130 main jet. (even our 5 speed carb has 135 main compared to 165 of 4 speed; however, the pilot is much bigger at 22.5, so I believe it's the venturi that makes the difference. You should know better). I bought it online from a reputed seller who claims its RXZ's carb (I believe Malaysian). Any way I exchanged it with 165 main from my 4 speed carb, but the trouble remained. That's why I guessed it may be because of ignition hence changed to the aftermarket CDI. The CDI works excellent combined with my stock VM 22 4-speed carb. Spark strength is very good. I'm riding the same bike for the past 2 decades and it runs on aftermarket performance filters for at least 18 years, K&N, Proton, Pipercross, and now UNI. Any way, lets see what happens after the breaking-in. Thanks again for reading my comment and suggesting :-)
You're a pro 😉
22.5 pilot is not problematic for rx1354s,so I suppose Pilot won't be creating any issue,moreover you've good ideling and initial .
Primarily it has issues with the main jet or the needle jet which is creating scene .Try setting circle clip to on position down ( from where ever it is)
** before anything pls do plug reading..
Moreover I'll say use the stock carb atleast for the run-in period , any how the 26 is uncertain.so a bit risky..
Brother thanks for video , I have one question if I place the ring in second position , you said 3 is the optimum
3 is optimum.. . try other places and feel the difference . it's easy thing to to 😉
Can you please let me know how to check the leakage in choke of Rx100 carb?
Soap water method
Nice information, also make video on how carburator work
Thank you so much....
I'll try to put it up someday.
For better performance in lower rpm in which slot should we put the ring?
Above middle level.
👍👍Excellent explanation with practical application 👌Very nice video. If there is any video on RX 100 carburetor detailed cleaning, please share the link. Thanks in advance 🙏
Can I discuss you personally ? I have some problem with my recently restored RX 100..1990 model bike carburetor.
Sir, i need help.some guys are increasing the atomizer holes .what effect will we get ?.do we get leaner or richer when we drill big holes in the atomizer
we get poor mixture or infact incorrect ratio for proper combustion.
NO point of doing those stuffs
Really informative video! Nicely done, and thanks a lot for making this in English!
Thank you 😊 glad to hear that it was helpful.
Took note of your words in my earlier video.
@@MotoTravelRide Thanks!
I own Platina 2006 model
When I try to use choke in cold start bike turns off, while in other bikes rpm raises.
By changing the slot will my problem get solved?
Moreover while kick starting I've to raise the throttle to start up, Without raising bike does not turn on, and has a very rough idle & bogs.
Changing slot wot solve this issue, this sound like more of something from the pilot jet circuit and the tuning screw.
Get the carb cleaned check both mentioned above for any damages
@@MotoTravelRide Thank you 🙂
Very nicely explained..pls suggest..
I am using an Oko 28mm on my stock Rx135...I am getting amazing initial pulls..but getting stressed at top ends...mechanic suggests to go leaner as petrol is not effectively burning...will it help to change needle pin settings to leaner..Tnx
Hi.. Thank-you for appreciating the work.
Will need few more details - jet side on that 28mm, air filter, block size.
@@MotoTravelRide tnx for taking out tym for reply..its oko 28mm flat side carb(jet size I never checked)..air filter is moxi..rest all is stock...in general is it correct to set big size carb at lean so that it will act better for a stock engine
Block is 2nd oversize of 5s
Sir apne clutch bell uper jo video banaya wo bali video kaha gia sir rxg or rx135 ki clutc bell teeth ki uper
czcams.com/video/hQGXBDZ1288/video.html
Bro 5s carb se 3 tread athahe Centre Rakna chayiye?
Yes bro..centre always. 3 thread centre always 2nd.
Can use in 4th slote for good performance
yes you can
Hi bro
My throttle piston valve is stuck inside ,so the rpm is very high ,.What should I do .
Do I need to replace the pin or piston valve .
Please help me
take out what is stucked ...and then sound why it was stucked .. if damaged then need to replace.
I need speed so put in the bottom slat
I need only milage not pick up ,Can i get some more milage when i place in first slot , is there any problem
Depends...mostly no.
Whats the present mileage you're getting
@@MotoTravelRide 45+
It's the same for RX 5 speed carbs as well?
Centre one preferred.. there are 3slots in 5s needle.
@@MotoTravelRide ok thanks! will performance be affected using a 5 slot needle in a 4tl420 carb? I understand there is a difference in taper.
Can you make a video on how to tune the bike for optimum mileage sacrificing some power and also how to tune for optimum power sacrificing some mileage focusing on what could go wrong in both cases. Also which combination of jets to used for power or mileage based on the blocks being used on the bikes. Thanks for your videos, it's a big help for the 2 stroke community and for those of us who self wrench.
Rx100 My bike flattering on full throttle when in slow speed like when climbing hill road if it gain speed about 60/70 no problem....hits smoothly to 80/90/95 what will be do.....is it rich......
Rx100
yes rich... lean it by quarter turn. and check
My bike also flattering what the solution
Sorry Just out of topic one question
Does rxz 4 speed and rxz 5 speed have size difference in the that plastic rpm wheel (the wheel which is responsible for the working of rpm meter)?
I don't remember it exactly the teeth count difference at the moment.. will update in some time.
One thing for sure, there is a quality difference on both the wheels.☺️
Yes,what i felt is teeth count was almost the same but a very slight size different for these plastic wheels
no Brigin Bs, It's the other way - a single tooth difference will not make a visible difference of size but it will make a huge difference in the readings..
i was unable to fit my 4 speed plastic rpm wheel in the rxz 5 speed clutch setup, as the 4s plastic wheel was a big one .thus fitted an 5 speed plastic wheel which is slightly smaller
Wot am thinking is if there is an difference in rpm wheels means dont the same difference be there in 4s and 5s clutch primary wheels (even if teeth are same the size would be different for primary wheels?)
Brother what are the advantages of rich and lean fuel settings??
Both doesn't have any advantage... thats the reason we have a thing called as optimum setting..
@@MotoTravelRide currently my needle pin is set in 5th slot(most bottom) i,e rich fuel.....will it affect my engine in long run??
Sir, I own aRX135 my bike gets jerk or feeling engine getting off when I speed up to 70-75Km, if I reduce the speed jerk stops and runs smoothly, upto 60 km., Speed no issue, Machanic checked the petrol flow it is working good, problem is not solved, can u suggest what is wrong with bike..
My bike have the another problem with bike running for about 10-15Kms and stop for a while, try to start, it takes 15-20 kicks to start, where as start with choke with one or two kicks.
Can suggest to get out these above problems....
Hi
Brother..
Bro it depends on piston size?
Yes,Piston size primarily. Every oil input is dependent on piston size only.
@@MotoTravelRide my friend 135 4speed running on 1.5 over size piston
Where is the position of needle pin ring at top or bottom?
Set the needle to 2nd from bottom( pointed side).
Then tune the carburetor.
Without engine oil .. bike running.. wt happened..
Nothing will happen gears will be hard. Better to put oil immediately
Hello bro good
Kasaragodian
U mobile number
Power section ok..
Hindi
Bhai hindi me video banao na plz
Dono language me hai ye video.. dekho channel pe miljaega
English me bat karte ho hindi me bat karke samjo
Oo bhai hindi me bolo