thanks for this. I hate these plastic container filters, too much work. I wish they still had those small iron filters located near the engine bay which is more easier to replace.
That had to be the best car repair video I've ever seen on youtube for any subject. It presented the procedure in clear, incremental, step-by-step shots and did so without any talking. I do have a few questions though. First, I'm one of those people who is hyper-sensitive to the fumes emitted by raw gasoline. One time I had to be taken by ambulance to the ER of my local hospital because I'd unknowingly inhaled too much. I was replacing the fuel filter on a '96 Honda Civic and did the work outside, so proper ventilation was not an issue. Would you know if there is any type of facemask or air filter designed especially to filter out those fumes? Another problem I would have is the only workspace I have is the parking lot of the apartment complex where I live. Several of my neighbors smoke and they like to gather together in one or two areas in the lot and have a smoke-off. How far of a distance would I need to keep them at to prevent the entire lot from going kaboom and is there any way I could redirect the fumes in a safe direction? Third, where did you get that particular lockring tool? I've seen many different types available, but yours is the only type I would use because it applies torque to four points on the ring rather than just two. I've heard horror stories about how difficult that ring can be to remove even with the proper tools.
Yes, you will need to buy the filter removal tool. You can find it online. You can also find the whole canister as a replacement part instead of having to direct the canister in order to get to the filter. So much easier than this process.
Good tutorial, i think using motor oil on the O rings could damage the rubbers. Do you think silicon could be a better option or the oil is going to get flush by gasoline. You changed the filter canister but i also see the new upper plastic . Is that included with the fuel canister. If not why is been changed?
Hi! I just replaced fuel pump and fuel pressure regulator on a 2016 corolla... I'm having issues with warm starts, the car will long crank before starting.. do you think the filter can cause this issue? its only that, no lost of power that I can tell at least
Btw..just wondering whats the millage of the car when this was done and whats the octane grade there? Iam currently on 190k and octane is 95 and 97 here in Malaysia.
My corolla has 130000km never changed fuel filter, but I parked outside in a 6 C with lots of rain, battery drained It took runs of 5 seconds x3 to get it running with boostcables. Next day normal battery and immediate starting. Im wondering if was water due to condensation or filter. I dont have any warning lights. And it runs normal
💯❤👍👍👍 One question: you put engine oil on the rubber part for lubrication, is there any worry about erosion of the rubber in the far future? After all, the fuel filter will stay there for many years.
@@MayoCarsDR I changed the fuel pump today actually but the car only started once and didn’t turn back on. Spark plugs replaced, valve cover gasket replaced. Any other suggestions?
thanks for this. I hate these plastic container filters, too much work. I wish they still had those small iron filters located near the engine bay which is more easier to replace.
I think there is another fuel filter canister near just below the air filter on the left side below. In the engine compartment laborious to change
@@limamantapachitas ah yes, one primary and secondary fuel filters.
mopar still uses canisters like that im pretty sure
That had to be the best car repair video I've ever seen on youtube for any subject. It presented the procedure in clear, incremental, step-by-step shots and did so without any talking. I do have a few questions though. First, I'm one of those people who is hyper-sensitive to the fumes emitted by raw gasoline. One time I had to be taken by ambulance to the ER of my local hospital because I'd unknowingly inhaled too much. I was replacing the fuel filter on a '96 Honda Civic and did the work outside, so proper ventilation was not an issue. Would you know if there is any type of facemask or air filter designed especially to filter out those fumes? Another problem I would have is the only workspace I have is the parking lot of the apartment complex where I live. Several of my neighbors smoke and they like to gather together in one or two areas in the lot and have a smoke-off. How far of a distance would I need to keep them at to prevent the entire lot from going kaboom and is there any way I could redirect the fumes in a safe direction? Third, where did you get that particular lockring tool? I've seen many different types available, but yours is the only type I would use because it applies torque to four points on the ring rather than just two. I've heard horror stories about how difficult that ring can be to remove even with the proper tools.
Good job buddy. I was curious to how labour intensive job was and now I know, thanks
Thanks for comment
I like the way you work 😉
Thanks for comment
Big fan sir❤❤❤❤❤ ma apke har video like karta ho sir ❤❤
Thanks for comment and watching video dear
Love it my man!!!!
Thanks for comment
gracias por el vídeo desde Perú
You welcome
Thank you 👍🏻
Good job
Thanks for you excellent video! Just wondering what’s the model of car in this video? My car is ZRE182R, do I have to buy that filter removal tool?
Thanks for comment,The car in this video is a 2017 model
Yes, you will need to buy the filter removal tool. You can find it online.
You can also find the whole canister as a replacement part instead of having to direct the canister in order to get to the filter. So much easier than this process.
Can you share its part number. Is it made in China, Thailand or Japan ?
Thank you !!!
You welcome
Good tutorial, i think using motor oil on the O rings could damage the rubbers.
Do you think silicon could be a better option or the oil is going to get flush by gasoline.
You changed the filter canister but i also see the new upper plastic . Is that included with the fuel canister. If not why is been changed?
It should be oil only to apply any O ring
Thank you soooo much.
You welcome
Good👍
Hi! I just replaced fuel pump and fuel pressure regulator on a 2016 corolla... I'm having issues with warm starts, the car will long crank before starting.. do you think the filter can cause this issue? its only that, no lost of power that I can tell at least
Were the o ring all right? check fuel pressure
czcams.com/video/KhHQpERkaHg/video.html
Change your fuel injectors. I had the same problem and I changed mine and it starts easy like it should
I have a question, what spray do you use to clean the top and the inside pieces?
I always use gasoline to clean the parts
nice video, thanks for that.
what song is used?
Thanks for comment
when is the right time to replace fuel filters?
30000km to 40000 km
Le pone aceite para lubricar y cuidar las conexiones pero te rompe todas la trabas de la tuerca azul.
Aceite no es recomendado para caucho, no se sí la gasolina lo va a lavar y solo es para que resbale y lo haga facil eecentrar en posicion
Btw..just wondering whats the millage of the car when this was done and whats the octane grade there? Iam currently on 190k and octane is 95 and 97 here in Malaysia.
71964 km
The fuel filter should be changed after 50,000 km
My corolla has 130000km never changed fuel filter, but I parked outside in a 6 C with lots of rain, battery drained It took runs of 5 seconds x3 to get it running with boostcables.
Next day normal battery and immediate starting.
Im wondering if was water due to condensation or filter.
I dont have any warning lights.
And it runs normal
👍
I need to tool to remove the locking ring. All i have access to is straight screwdrivers and hammers
Thanks for comment
👍👍👍👍👍👍👍
tengo Toyota Corolla año 2022 se necesita el extractor
What is this?
Lexus nx200 gasoline filter?
Do you need the fuel filter number?
No! I want to change the gasoline filter
Bos saan ang shop mo
Is there not another fuel filter within the fuel lines?
No
How many kilometers need to change fuel filter?
The fuel filter should be changed after about 50,000 kilometers, so the fuel injectors are always fine
@@MayoCarsDR thank you
When i open the hosenwith the yellow clip fuel goes everywhere even when i run the car
What I can help you
I usually vacuum the dust before opening the filter...
Good
that is one fucked up designed to be replace the fuel filter.....
this is not a USA car. different set up in the us.
Yes
vieran como salen esos filtros internos de la bomba de gasolina aqui en Venezuela🤣🤣🤣🤣🤣
Only 72K KM? Not 72K miles?
It should be replaced after 50,000 km
💯❤👍👍👍 One question: you put engine oil on the rubber part for lubrication, is there any worry about erosion of the rubber in the far future? After all, the fuel filter will stay there for many years.
The purpose of applying engine oil is only to put the rubber in its place. Later that oil is lost due to petrol and there is no harm in it.
Do you have a link where to purchase parts or part number. Thanks
No
Seat ke clip salamat hain yan tut gaye hain
G-set clips are fine
We can only assume that he unplugged the negative terminal on the battery before continuing his work. =/
Not a necessary
@@MayoCarsDR I changed the fuel pump today actually but the car only started once and didn’t turn back on. Spark plugs replaced, valve cover gasket replaced. Any other suggestions?
This has to be the worst design I’ve ever seen for a fuel filter..good fast job for the experience
Thanks for comment
pra que a música ridícula
most ridiculous thing I have ever seen to replace a fuel filter. This is routine maintenance shouldn't be a hour + long job.
Pass 😂
Looking up the part number, for my 2013 it popped up a different one, is that correct? 77024-02180
Your car is american? You send me your car's Vehicle Number