Dye DSR Hyper6™ Reg
Vložit
- čas přidán 21. 11. 2017
- Breakdown of the new DSR Hyper6™ Reg
Video is sponsored by Dye Paintball check 'em out.
dyepaintball.com/
My Facebook:
/ dyetechmatt
Follow My Instagram:
/ dyetechmatt
Dye DSR Owners Facebook:
/ 1973589702910791
Dye M2 Owners Facebook:
/ 1516076995373790
Join the Dye DSR Owners Group
/ 1973589702910791
Follow My Facebook
/ dyetechmatt - Jak na to + styl
Nice! Thanks for sharing! We love the DSR!
That worked thank you, any chance you could make a video on navigating the menu I know you touched on it a bit in one of the videos but if you could make one specifically on the menu and mos operation that would be great, I’m having a hard time figuring out how to navigate menus/firing modes and enter settings
+Guncleana I will for sure make a video on that.
Still waiting on the menu navigation vid! Got another question for you as well the lever on my reg needs to be replaced the little nub on the backside of it has worn down for some reason is this a part I can have dye send me? Or would I need to send the whole gun in to get that fixed?
Whats the original position of the adjustment screw for fps once you out it back in. Just so i know its not to high when i test it first time
Hi I’m having an issue with my dsr after I flip the lever (and I flip the lever all the way past the little nub) to air up my dsr the lever slowly moves back to the off position and purges the gun of air I can’t get it to stay in the flipped on position. Please let me know what to do I just got it in the mail and am hoping it’s something I can fix without sending it in.
Thanks
Take a pick and remove the dye badge on the lever and tighten the lever down. It might be possible that it's loose. You might not be able to reuse the badge, but done right you could.
do you put grease on any of those o rings?
You normally would yes. But in this video we were just going over the new Hyper 6 reg in the DSR.
how come the reg seat would need to be replaced?
M F Over time adjusting the pressure of the marker will cause it to wear a groove into the regulator seat. Which can cause the velocity to jump around if worn down damaged