14 Band Spectrum Analyzer Part.3 | Acrylic Tower
Vložit
- čas přidán 23. 08. 2024
- Part.3
14 Band Spectrum Analyzer
Acrylic Tower
Acrylic Cutting, size, Arduino Code for Logo & More:
drive.google.c...
Tutorial 7 Band Spectrum Analyzer Version 2 :
• 7 Band Spectrum Analyz...
Tutorial 14 Band Spectrum Analyzer Version 2 :
• 14 Band Spectrum Analy...
eBay :
DMS-307 V3 7Band Music Analyzer module
www.ebay.com/i...
DMS-314 V3 14Band Music Analyzer module
www.ebay.com/i...
DMS-321 V3 21Band Music Analyzer module
www.ebay.com/i...
DMS-328 V3 28Band Music Analyzer module
www.ebay.com/i...
DMS-335 V3 35Band Music Analyzer module
www.ebay.com/i...
www.ebay.com/i...
www.ebay.com/i...
For orders in European State :
please contact the seller at
btschudin@intergga.ch
More Info please contact our seller at
sevenliu1@gmail.com
WhatsApp +6285886373588
/ legendmasters
TOKOPEDIA :
Music Analyzer module
www.tokopedia....
Complete set Acrylic Tower Music Analyzer
www.tokopedia....
Part.1 Video:
• 14 Band Spectrum Analy...
Part.2 Video:
• 14 Band Spectrum Analy...
Part.3 Video:
• 14 Band Spectrum Analy...
Music In This Video :
Track: Tobu - Obstacles
/ tobuofficial
Track: Rolipso - Jumble
Link: • Rolipso - Jumble
Track: Tobu - Infectious
/ tobuofficial
Released by NCS / nocopyrightsounds
Track: Julius Dreisig & Zeus X Crona - Invisible [NCS Release]
NCS: Music Without Limitations
Music provided by NoCopyrightSounds.
Watch: • Julius Dreisig & Zeus ...
Free Download / Stream: ncs.io/InvisibleYO
Track: Tobu - Hope
/ tobuofficial
Released by NCS / nocopyrightsounds
"THANKS ALL FOR WATCHING"
The most beautiful and impressive project I've seen in years
I'm impressed that the light from leds is not "leaking" to other segments. Overall amazing project and great execution ;)
He is exploiting the scheme that fiber optics uses to prevent light from escaping from the sides of a fiber.
Once I had the same issue when I was making a similar one. I had to cover lights using cellotapes to fix that issue. czcams.com/video/Cx3EwPUKW00/video.html
This is the coolest display I've ever seen, and being a DIY makes it even more awesome. Thank you for sharing your gift with us.
I surprised there's nothing like this on the market. I'm definitely not doing my own DIY for this and I can appreciate the craftsmanship, but I wish there were similar products that were purchasable.
Jaw-dropping VU meter project. The best project I ever saw in the first quarter of 2020. Good job!
"the first quarter of 2020" ???? You're way ahead of everyone? Whahahahaaaaaa!
Bom dia amigo
Tem como você me manda o link desse equipamento pra mim pode comprar
Not VU Meter... Spectrum Analyzer... Not the same thing at all...
Была бы возможность поставил бы 1000-чу лайков,очень красиво это шедевр,супер!!!!!!!!!
This is a MASTER PIECE, Should be kept in a MUSEUM ❤
Man, I'm already in love with this as an idea but seeing you making it real. Its wholesome
Welcome to another episode of if i had those tools :)
Awesome work!! appreciate your effort!
for those who reading this let's watch for another 30min 'DIY CNC Laser Cutter'
This is freakin' incredible. I want one!!!! I don't think you'd have any problem selling these for like $750-$1000 a piece... You'd probably sell quite a few at $1,500 even. AMAZING WORK. This is absolutely BEAUTIFUL!! I would definitely buy a kit of this for cheaper than the aforementioned prices if it was closer to $500 or less; no question about it!!!
I am selling it for 900€. Can be lower if more people would order them from me but right now it is just a few thats why i cannot reduce the price unfortunately.
@@BOBOY162 that makes sense! It's beautiful!!
@@imjody If you are interested in having one you can email me on mining.germany@gmx.de
How can i buy this witch web site available this@@BOBOY162
So many people in the comments thinking this level of love and quality can be bought.
It can't for what they're willing to pay.
WoW ! Crazy work ! Love how all of this is clean made ! Good wiring, superb result. You should sell some of these !
that is one of the sickest things i have ever seen that is a must have for my home theater. INSANE!
The creepy old guy with the trans am said the same at the Chevron.
where can i buy this
I totally agree with you on that! I'm almost drooling over this. LOL Coolest damn project I have ever freakin' seen!
Это лучший и крутейший экв что я видел! Мастер гений.
Схемку бы (
Вот история повторяется.. в 70х-80х годах это называлось цветомузыка. Все прям были помешаны на лампочках под музыку моргающих, потом даже журналы были завалены схемами, а радиомагазины - комплектами для самостоятельной сборки.. даже я собирал, и для дома на транзисторах и для дискотек на тиристорах (тепловозных :)) И вот 21 век.. увидеть "живую" моргающую лампочку настроенную на определенную частоту - ДИВО ДИВНОЕ! Это не в экране компутра, нубука или селифона видеть.. ДА. Японские кассетные магнитолы с 3-10 диодами на табло ихвалазира вызывали у многих эйфорический припадок.. Что дальше ждать? Реинкорнации эры видеомагнитофонов? Винил уже в тренде.. если чО! ;) :)))
Согласен с тем что автор "заморочился" с воплощением своей творческой идеи и у него всё получилось. Спору нет. Сама идея стара как мир. Данный видео ролик хорош для тематики "интерьерный дизайн". Моё мнение. С Новым Годом! :)
@ak7719 ЭКВалайзер!!!)))))
@@MrSonar2000 так там есть прошивка для ардуины , думаю вполне реально на основании её понять что куда подключать , а модули все видны на общем фото платы.
Best looking spectrum analyzer I’ve ever seen. I would pay a grand+ easily for that.
I build this with my own adjustments for my wife's father. Thank you for the inspiration. Took me quite some time though.
The most beautiful spectrum analyzer display i saw.....i will built my own version too. Nice idea i learn from this.
A ton of patience and hard working, and perseverance, and creativity and technique, and... I'm tired just in commend... imagine in doing
THIS is why i pay my internet bill. this might be the effing coolest thing ive ever seen
One of the most beautiful things I've ever seen...
Should be packaged as a kit. Would love to make one for my classroom.
One of the coolest pieces of tech I've seen.
It;s Soooo pretty...I can't take my eyes off of it ! Absolutely the best by far.
'
big wow love that LED change color with music...
beautifully LED home made project
Enjoyed even with the ads! What a craftsmanship, excellent!!
This is amazing! Well... I will say one thing: KICKSTARTER. Sell it like Lego kit, all the parts in the box with the printed manual and video manual here, we would just need to assemble it :-). OMG I want it so much :-)
It would be cool
If he offered multiple sizes, thicknesses ("flat" for wall mounting, taller for a club or something, miniature (desktop) variants), I think this is a product that will be very popular!
I think you are a very cool specialist! You have very correct hands and serious thoughts in your head! Forgive me for my English.
Mantap bang..
Sedikit saran ,coba ditambah heatsink/plat aluminium untuk meredam panas LED...overall keren dan bangga untuk +62😎
Это просто шикарно! Красота какая!😲
H
Bigger than was expecting with the dimensions. TechMoan would like this.
So would beardyman...
thought the same.
Excellent great very good experience nice job. God bless you and your family .Thankyou 💐💐💐💐💐
👍👍👍👍👍👍👍👍👍👍👍👍👍
How nice if one side of your entertainment room installed a system like this.... beautiful
I want this on my wall/room. This will be heaven after a long tiring day.
Классная цветомузыка, второй такой нет! Лайк однозначно, проделана хорошая работа!
а можете определить какой лазерный станок используется на видео для резки орг стекла
@@wernesto. спроси у автора, думаю на канале должна быть ссылка.
да
Absolutely fascinating! With that module you can mount led strips at every corner in the house.
Thank you for to sharing it.
Why do the lights make fools of many of us?
I even bow my head seeing these lights hypnotized, it's crazy!
The project is awesome, by the way.
In all seriousness that is about one of the coolest things I've ever seen,I'm 55 and seen quite a lot in life.. you should be very proud of yourself for creating such a work of art...and also quite seriously how much would you charge to have one built,assembled and shipped to me ??
Agree with everyone else, dude this is a fantastic project and an incredible result! Great job!
I am sitting here, both amazed and mesmerized. My jaw is dropping with drool oozing out!
That's a great project and great execution! Beautiful love it. This would be a wonderful kit
This needs to be sold as a completed product. "Take my money!!!"
Please beware one thing about laser cutting acrylic plastic: the cutting process is thermal & leaves built-in stress in the parts. Later, these stresses may cause the parts to crack, especially around holes. The solution is to bake the parts after cutting out, slowly heating them to just under the softening point (where the stresses relieve), then slowly cooling the parts back to room temperature.
You're overthinking it. I don't have access to a laser cutter. All I have is a table saw. If I were to make this assembly, I'd consider sending the parts out to be cut on a WaterJet. It'll leave a matte finish on the edges which can be painted to change the performance characteristics. Another option is to use a disc sander to trim the edge of the cut. Another great option is to send the job to a machine shop. A carefully planned cut sequence will leave interesting tool marks in the edges of the cut.
@@bpark10001 That was a pretty sweet pdf link! Thank you.
-- I apologize for my earlier comment. I see what the deal is here. When we cut the material, each cut leaves a tiny stress riser, even if I use a nice sharp flycutter with a wiper insert. If I take the part and bend it, then it should fracture right at one of the tool marks.
-- I do want to try my disc sander idea. A bit of soapy water is all it requires.
-- As for machine shop work, I wanna try an experiment with a small piece. Drill two holes with a 2-flute endmill. Climb cut the other side with a downcut endmill. Flycut another side. Oven cure one piece, leave the other one as-cut.
@@Dr_Xyzt OK. What happens is that the plastic melts in the cut's surfaces, the same as if it were laser cut or "flame polished". The melted plastic cools & shrinks, but is prevented from doing so by the surrounding non-heat-affected plastic. The surface is in tension, where defects are present to start cracks. The worst cuts are the ones that leave sharp "inside" corners, from which cracks grow. Modify geometry to avoid these (for example, for clock gears, put a radius in the tooth roots & on top of the teeth). Keep tool speeds LOW & keep tools SHARP. You can laser cut. The trick is to heat the whole sheet to annealing temperature BEFORE the cut. (You will need to scale up the part to account for expansion).
You can see the stress by getting polarizers (cheap pair of polarized sunglasses, remove the lenses, set crossed so is dark to transmitted light, put the acrylic between). If stress, you will see dazzling colors). After anneal, this color will disappear & will remain dark.
desde Venezuela Valencia estado carabobo. felicitaciones... Excelencia en Mística y presentación .eres un artista. en diseño. trabajo. y acabado ..que sigas triunfando hermano .. seudónimo corre
Perakitan yang cukup rumit tapi hasilny menakjubkan, good job
THIS IS A REALLY COOL PROYECT TO DO BUT WITHOUT THE CNC LASERCUT IS KIND OF HARDER BUT IS AMAZING NICE JOB
i dont really comment on videos but when I do, I really mean it! This project is soooo COOOLLL!! Cant imagine the amount of planning and prototyping that go into making this! Keep it up!
Mantap pokonamah dengan disain terbaik bahan"nya pun mantap kualitas nya yang terbaik
The end is mesmerizing. I don’t even allow myself to blink 😯
I'd buy this in a heartbeat!
Me too
Me too
l almost cry seeing this amazing VU, if you choose other music, i think i can old the tears... amazing.
That is nothing short of pure GENIUS!
Woooo.... That is one of the coolest thing I've seen so far on CZcams. Thanks for sharing it...
Man I just got to say hands down everything about this video was simply amazing! Edits, craftsmanship, teaching... truly is inspiring. I think I'm gonna have to take a crack at it myself. Maybe even post my own video of me attempting to build off your tutorial and see where it goes.
BEAUTIFUL! I've always loved spectrum analyzers.
Amazing, ever house should have one. Looked in to the price of parts to make in the UK, not that bad, but shipping anywhere would cost a far bit. But I will make myself one for sure already have price for the acrylic and wood, just sorting out the other bits.
Keep on making such stunning things.
I'd suggest to make the bottom out of marble, add some golden caps, and sell it for at least $2000-3000. It needs a big house. Sure, not for everyone.
Fantastic !!!!
I always dreamed of having a session at home. It was very beautiful. Congratulations !!!
czcams.com/video/LpMTz64oqHQ/video.html
Should have made this from EndLighten T, which is a special acrylic glass from Evonik that is meant for light scattering when edge lit. In shops it also goes by the name of Plexiglas LED.
Light scattering for plexi is also named Back Light. It consist in "damage/scratch" the surface in a non-homogeneous way to counter the light exiting the panel with the distance. In such a tiny surface (aka 60mm here) is not needed. But for bigger panel/surface, it provide a nice and homogeneous light density all over the surface.
Not worth the extra cost. Enlighten T is a ripoff.
IMO, the darkness that is on the edges gives it a 3D look and makes the columns look round.
Wouldn't change anything. A homogenous light would make it look boring, compared to the current design.
My radio cassette player in 80s had a 2 band spectrum analyser so this is amazing👏❤❤⚫🔴🔵⭕
Because we all need a spectrum analyzer. Makes music visually appealing as well
I would love to have one of these. You should definitely make this available to sell.
I jsut remeber, when i see this, in the 80'th i build such toys (not so big and expensive in tech) at the analog way with transistor, condensator, resistor rows and bandpass filters ... 40 years later "its modern" ... :P
80'th? hobbyists were building them in the 60s with painted lamps and projecting on the walls.
I'll add my voice to the requests to sell this a complete kit.
Very very good
I want this under my tv hooked up to my console... OMG PLEASE!!!!
Просто офигеный девайс. Автор крут.👍👏
Схему бы лучше дал. А то заморочился как на заводе, показал как круто он вырезает прямоугольники на лазерном станке, а повторить без возможности.
Beautiful and very creative. This is perfect execution ❤❤❤❤
Need to package and sell as a kit
Absolutely, I'd buy one in a heart beat! Wish i had the tools to make one.
I agree. - I want a 32-Band version
@@techoverloadx If it wasn't a gazillion dollars of course.
This is so bad ass. I want a few.
Yes, I would also buy one off you..... That is amazing! Wow wow wow! 😎 👍🏻
This is awesome. I would have loved to have one during my raver years in the late 90s.
45 years myself.. Still love EDM.. we started this ....
FANTASTIC! Many thanks for sharing this awesome project!
sem palavras!!!
dentre todas as palavras mais lindas do dicionário, não consigo achar uma para elogiar o quão lindo ficou esse sequencial...
гайвер в истерике бьется. Наикрутейшая вещь. You a cool dude!
my first thought was " where can i buy it?".
great work :)
same here :D
Sencillamente HERMOSO, te felicito es el mejor ecualizador de espectro que he visto :)
¡Hola hermano!
It's true.
Respect 🇰🇿
what the heeeellll is that... i mean, i've done couple things in my tiny workshop[ but this is just made me like i know nothing.seriously this is amazing man.thx for sharing.
2 Thumbs up, 2 Big toes up and 1 Tally wacker at full attention!!!
Totally over the top awesomeness!!!
:))))
The built quality is god !
a cada vídeo que vejo seu me surpreendo mais e mais...parabéns ainda é pouco diante de tanta sabedoria e criatividade
My inner teenager is screaming "take my money!" Damn cool project sir.
6
Congratulations for the best thing I have ever seen in my life... i can't wait for new studies :D
the best thing i ever seen on internet!
I am an audiophile and THIS is the most amazing thing I have seen on the youtube ever. Marry me and bring this over!!!!!
Pñ
Qqq
@@davidtemistoclesgarciaespi3938 r/ihadastroke
Lol
The wiring looks really difficult... but you make it looks so simple...
It looks amazing, and hypnotic.....
You should open a shop - as I'd buy one......
This build is so easy, I can do it in my dreams...only in my dreams.
#Гайверсделай а ну-ка лайкаем чтобы Саня заметил 😏😉
@KoSteT нравятся его супер подробные видео.
@@iburbon куда уж подробней то ....
@@MrZorro441 люди как видишь лайкают. Значит хотят такой проект от сани. А то он свой эквалайзер забросил🙁
Пластины из акрила, меньшего размера 4×6 обойдутся 12.000р, если делать самому, из эпоксидки то 7000р, но мля 280штук лить..
@KoSteT тут не каждый сможет повторить, так как всё разбросано, тот кто шарит найдет, или покупать его модуль на ебэй за 70 бачей, а кайвер разжуёт для каждого
Awesome project! Definitely, something I have added to my list of things to do
Absolutely mesmerizing, well done, good job, love it 👍🏼👏
Man this reminds me of the good old Winamp days!
I would buy this right now if it all came in one set. Right now! I want one!
Шикарное зрелище! Браво!
Классный светодиодный эклавайзер))) Хочу такой же собрать! Спасибо за идею! ))
Конструктор ))
@@eugenxxx1978 Можно ли купить конструктор, для самостоятельной сборки?
If there is ever a precut/drilled, ready to assemble kit, I'll get one.
I run cnc and laser workshop so I can roughly figure out the cost when I see products. you could buy a boss stereo system instead building one of that.
Seller contact sevenliu1@gmail.com
22:30 is my favorite. The gold is really nice
Очень крутая штука получилась, хочу такую же
What an awesome work! It was a pleasure to watch this accurate, clean workflow. Respect!
Возможно и часы сделать . Чтобы не просто стояли когда музыки нет , а время показывали ;)
1:25 those blocks at the start of the vid is kinda cute.. [ㅇㅁㅇ]..
WHERE TO BUY ?????
xdxddxd
Pareidolia.
@하루 indonesian
Awesome mind blowing job God bless you 🙏🙏🙏🙏🙏
So beautiful!! I hope this is on the market!
Also. I think this has promise in the Pro-A/V world, with DJ setups :)
Man, that is just about the Coolest Damn Thing !
wowsers, this would be awesome on the wall of the DJ's booth. Found my next project.
Wish I had one like that one. Especially when it changes to different colors. 💯