Tip Series - Hi-capa Magazines - Gas Leak

[@nickwolfs8701]

Great to see a straight to the point clear video! Good job dude!

[@iRicoFy]

Thanks for the great explaination and help! It worked. This saved me having to buy a new one!

[@mariot1181]

Thanks buddy...very helpfull
Both WE hi capa works fine now
💪

[@lonevoice4857]

awesome video! thanks alot for the help on the regular mags.. just a reminder, do NOT use this method for the extended magazines. opening the bottom cover plate. the first one on the regular mags holds the spring

[@arch.angelhandyman5485]

nice mafrend, thanks

[@malteostling5957]

Great video it solved my problem with my hi capa magazine

[@garrywhite13371337]

Damn bro you're great help thank you! Stupid gas leaks lol

[@ramirdacanay1858]

Highly recommended.

[@ramirdacanay1858]

Thanks 😘

[@tonylavelle8017]

Thank you Zerkxea, this video was perfectly presented and so useful. You saved me a fortune in replacing my leaky Salient Arms mags.

[@dbworthless]

Thank you soooo much 😊😊😊

[@lucasperies6952]

your the best !!

[@markevinlagsac3252]

I used wd-40 silicon and it works like a charm

[@maxonwolf5841]

Careful using that.

[@ryanhudson9155]

Helped a lot. Thank you

[@chessx]

worked perfectly thanks!

[@mrwickairsoft6345]

Thanks for the help

[@3wav]

Thanks a lot because i got a hi capa for my birthday and then the mag was leaking every time i put gas in it

[@cwtzh7736]

thanks bro!!

[@crgardner99able]

Great video man! Thanks. Helped alot

[@v3jas]

Thank you. Nice video.

[@krazykj03]

What size orings are the ones for the magazine?

[@thegreatcashini1720]

my magazine does not have a hole with a pin in it?

[@wademacdonald106]

Where do you buy the small black o ring?

[@timcarr5129]

Would petroleum grease / jelly or vasalene work?

[@MightNotBeRapid]

what happens if i use just regular gun lube?

[@euricful]

What size would the magazine base o-ring be?

[@garrywhite13371337]

Your best bet is to get a multipack of various sizes and see if you can find one thats close.

[@masonmaurice7388]

thanks that helped a lot

[@aimantokwan126]

inlet valve 6.4mm or 5.4mm?

[@tac_zac943]

great video help me but in the process i broke my mag for sure

[@SaltyViper]

At first I thought I could just tighten it down but that did fuckall. Managed to get away with using the evike silicone oil u add to propane to make it green gas. I'm gonna invest in some grease tho cause I'm sure the fix'd be more permanent.

[@AirsoftSouthAfricaShow]

I just Replace the Silicon grease you have shown with wrapping plumbers tape around the spots you have shown.

[@deangreen1309]

ok

[@sarahnz65]

In case of gas still in the magazine, is there a safe way to remove/vent the gas without resorting to just putting it back in the gun and firing until it just don't fire any more?

[@zerkxea]

sarah fowles @0:25 push that piece in to vent the gas.

[@sarahnz65]

+zerkxea thank you. All good things to know, picking up my first GBB high Cappa this week.

[@soupsfarm1825]

I have silicon lube thats more like oil (its not oil its airsoft lube) is that fine too?

[@zerkxea]

Yes, that should work too.

[@soupsfarm1825]

zerkxea thank you for the quick reply! I appreciate it

[@lmaooutloudd]

the o ring on my mag isn't all the way on and it won't stay on

[@ac_hype2909]

Hey I took apart my mag and I put everything back together but the screw on the bottom won’t screw back in. What do I do?

[@anxo7390]

Try to push down a little harder on the screw. It worked for me

[@yourlocalwigga151]

What lube did you use?

[@zerkxea]

Smart parts paintball lube

[@yourlocalwigga151]

@@zerkxea thanks

[@knightairsoftwarrior]

Where can you find o-ring replacements?

[@zerkxea]

Speedsoft_Raider Ace hardware or the likes. I was lucky to have an old paintball parts kit that had one that fit.

[@hobbyttc8469]

It's not gas leak tho but my tm hicapa 5.1's magazine ejects itself when i shoot. Anyone have the solution?

[@hatersupreme5968]

is that a zci fill valve or stock tm one? my WE valve broke when I tried to tighten it

[@zerkxea]

Rona Lisa Stock TM.

[@Tjkfbi]

I use co2 in my hi capa, but my hicapa explodes everytime i shoot it, how do I fix that

[@hatersupreme5968]

Tjkfbi tape

[@killuminati4350]

Ok... ok... alright