Hi there , could you please share what component you have bridged out ? i have a fcv 585 with a similar issue , i suspected the ribbon cable as when i disconnect and reconnected the ribbon the display will work but will shake and be off centre ? thanks in advance
Meron Kami Nyan sir, fcv 620 black screen lng tumutunog Naman pag eh on, pinaayos na nmin pinalitan na Yung capacitor sa C74 &C75 ganun parin po sir, ano Kaya Problema?
ang galing ni kuya mag ayos ng fish finder.sana marami ka pang maayos na mga aparatung pangdagat.
New technic in workd of electronics repair thanks for sharing and keep safe always
Nice keep on sharing
Amazing technique...good job.
Verry good
gaw kmsta
FCV 620 receives 24VDC power but wont turn on, What should I Check?
Hi there , could you please share what component you have bridged out ? i have a fcv 585 with a similar issue , i suspected the ribbon cable as when i disconnect and reconnected the ribbon the display will work but will shake and be off centre ? thanks in advance
furuno fcv 620 after the Elco 100uf and 330uf which leaked were replaced and still don't want to turn on what components should be replaced
just replace ic regulator or mounted ic.
I have same problem would you fix ?
Sir may binibenta ba kau supply cable nyan?fcv-627
Tengo un problema con mi sonda sale la pantalla blanca cambié Los condensadores 74 y 75 y nada
Meron Kami Nyan sir, fcv 620 black screen lng tumutunog Naman pag eh on, pinaayos na nmin pinalitan na Yung capacitor sa C74 &C75 ganun parin po sir, ano Kaya Problema?
Jamper LNG din Yan boss open line beep sound only ..ppuntang capacor..kylangan mo lng mag tyaga.
Idol san banda shop nyo?
Telugu mi to videos bro
Eu ligado o pw e dialogar não liga
yan pla ang sira walang display...no contact both end of the board.