I tell all of my creative friends about you, Matthias. They're mostly musicians from the Philadelphia area. Jazz players are often tinkerers, and they all find you as compelling and miraculous as I do! You're truly one of the great inspirations in my life. Cheers!
I have purchased the plans and built the jointer (with some minor modifications to fit my 13” cutter head and a 1HP induction motor) about 2 years ago now. I am still impressed how well it works every time I use it. If you ever design a Drum sander I would be the first in line to purchase the plans. PS My wife thinks I am the original designer. I can’t design anything good for you to build but if you ever messed something around the house feel free to blame it on me as a sort of pay back for making me look good in front of the wife 😜
I feel like I will probably never get to the stage where I would make one. On that note and what you spoke about project videos with Steve, I think this is so much more context than a plain regular project video. There is a story and reviewing a previous project also means there is so much more learning through the perspective.
Matthias - you are a legend. I've enjoyed all your videos over the years. I can't believe it's been 10 years since you built this! Keep up the great videos!
I have always loved the way that when he reaches the end of what he has to say, Matthias just stops. No closing remarks, exhortations to 'like' or subscribe - the video just ends. But he has mellowed over the years.
"dust deflection thingy" I love checking out your videos. It's wonderful to hear how a real engineer refers to things. I love to learn the technical terms for everything..
Wow! 10 years , thank you for being inspiration, I have not built anything near as complex, however i´ve been able to build a decent amount of things around the house thanks to youtubers like you .
Excellent review and revisit of the design! Congratulations- this machine held up, worked very well, and with only minor annoyance level issues... A supreme success all around!
Oh I been waiting for this!!! my delta 8" cast iron, I modded it made a hard maple back fence that extended it out another foot or so tro make it safe, then made that fence about 4" taller. So I started to check the flatness, so I could make the table longer, by a foot or so on each side. ya I stopped lol, I was ready to get the dycam out, a hand scrapers, and flatten it. This is the exact same as well on all three craftsman table saws. I did goto partial school for machining, so my brain thinks like that with wood working sometimes. I always try to remember it does not have to be flawless if i'm the only one looking at it haha.
Back at the turn of the century I sold my computer program and then went to the hardware store in the big city (Phoenix). The 1st thing I got was my RIDGID planer just like the one you've built. Takes a couple grown guys to lift it. You certainly learned the physics of this very useful tool.
Unreal. The 1:00 calculations, 1 millimeter here, 0.5mm there, requiring 1/3rd of a turn on the nuts? The level of expertise on display here just floors me
This was really interesting to see, especially the ones who haven't seen you build this tool. You should do "update videos" on other tools you have built a while ago and see how they've held up and maybe see what type of little tweaks you could make to them.
Induction motor is a good choice, but the air noise caused by the gap between the cutter head and the infeed table is also very loud. This is a great machine! I made one four years ago and have been using it ever since.
I used to work in a machine shop running surface grinders a lot. Guys would come in with jointer tables all the time asking us to get it dead flat. One guy even brought it back saying not flat enough. It's like an obsession.
And then within a couple days after being built, it rains, and then there is a week long hot and sunny time and anything built with that machine shop precision will deflect by more than the original deflection of the tool.
I remember watching you build it and your old shop!!. I've always dreamed about making one, but I don't have either the need nor the ability to make one haha. What I also remember and have been able to make is wooden gears!!
I had a flash of inspiration watching this video that never occurred to me before about these DIY jointer designs. When you said that you couldn't have a rabbeting ledge because the head pulley is on the wrong side I realized that, as a lefty I could build your design mirrored for left hand use, and then the pulley would be on the "rear" of the machine, behind the fence instead of on the front apron where you were forced to put it. Of course this depends on finding a cheap lunchbox thickness planer with the pulley on the same end of the head as the one you used. I've never seen a left-handed jointer so I never thought of making one. Having one would make jointing a lot easier than using one built for right-handers.
I thought about making a lefty jointer, but decided it was too dangerous to get used to going the other way. what if I did that on someone else’s jointer, or someone else tried using it. but I could just take the fence off and hang off the back. catch is, the bearing block on the other side gets in the way. I could have made that smaller though.
That's crazy. There was a recommended video at the end of this one for an earlier video about the very same jointer, 10 years ago. I remember watching that other one at that time and finding it interesting.. Time flies
Probably the best homemade power tool ever, even exceeding your amazing band saws, and panto router, if only I had access to Birch plywood (or similar).
Haha!!! I love your advice to not check cast iron jointers. So true. They are a pain to get just right. Nearly impossible to get my fence square. Luckily there are tricks to overcome that during glue ups. An amazing tool. If i had the confidence to build something ths complicated, I might give it a go.
Great history, I always loved this jointer. It will be awesome when you add that quiet motor. Will be nice and quiet between passes. I dream of having a thickness planer that is quiet between passes. The most inexpensive route for a quiet thickness planer is a used Shopsmith 12" (which has some interesting features like serrated in-feed roller (on later versions), feed speed control, and a separately available blade sharpening jig using a conical sanding disk).
A small rubber strip would also help on that deflection board for the saw dust I think, but you worked it out :) great video as susal, always an pleasure to watch your videos :)
When moving several years ago I picked up the VCR and it made a metal on metal chinging sound. I took it apart to find several dollars in change that my kids were "feeding" it. Lol. It wasn't broken but I was amazed howich change it could hold. It was all quarters cause I had a bowl of quarters in my room for the vacuum at the car wash. Now the vacuums are free.
Not crazy 10 years you’ve been using it and y had that many problems minor stuff you couldn’t buy one at the store and get 10 years out of it without no problems you’re amazing dude I have loved watching you build for a long time keep building
After tearing my thumb off with my jointer a couple of years ago, it sends chills up and down my spine when I see you put stock through that thing without the guard on. Jamie Perkins on the Perkins Builder Brothers channel did the same thing to his whole hand last year, and has to have a prosthetic now. Hands down (pun intended), the jointer is the most feared tool in my shop.
@@jandrewmore With a table saw injury it's usually just a straight laceration, and is easy to stitch up. A jointer just makes hamburger meat out of whatever you put into it. My orthopedic surgeon said it was one of the hardest surgeries to do because he had to get really creative to stitch up what was left of my thumb.
My wife and I are planning to live with my parents for a year to save up to buy a house. I have all my woodworking tools in storage, but hopefully after a year we'll be able to buy a house and I'll have space to build some Matthias Wandel tools. That's always been my dream.
I think the way chips got in there is if a chip gets thrown, bounces off the guard, then collides with another chip to throw it upwards towards the slot.
I've been working on building mine, following the designs! I've torn down an old planer and built most of the base! I'm still trying to figure out a good way to do the baltic birch stuff. It's over $150 a sheet right now.
When I was knee high to a grasshopper my boss told me respect the [dangerous machine], but since then I've upgraded the sentiment to never forget that the machine is constantly looking for the slightest opportunity to harm you in any way that it can.
I bought a 10 inch benchtop jointer and I was thinking about converting it using your plans because the bed mounting hardware on the 10 inch is the same as the 6 inch model and I get a lot of flex at the sides of the beds.
Running a board over a jointer, including high end accurate machines, often will leave the edge not straight. To get the edge straight one starts in the middle and works out. This may be part of the reason why European machines use those gap guards, and not the swinging guards, you can actually plane an edge with those, not just run a board through when is may retain the banana edge, or make it worse. There are safety reasons for those guards also. Super machine, I paid a lot more, it takes up more space and I have 2/3rd of the beam.
I have 7 years on the one that I built from your plans. It is still working great despite the abuse I have handed it.
What the heck, 10 years?! I remember watching you built this last week!
Me as well, 10 years... mind blown! See you in the next 20 years retouch video he for sure will make :)
Exactly my thoughts! 10 Years?? Incredible! And it still holds up perfectly!
I’ve been holding this thought for quite a while now haha
I tell all of my creative friends about you, Matthias. They're mostly musicians from the Philadelphia area. Jazz players are often tinkerers, and they all find you as compelling and miraculous as I do! You're truly one of the great inspirations in my life. Cheers!
I have purchased the plans and built the jointer (with some minor modifications to fit my 13” cutter head and a 1HP induction motor) about 2 years ago now. I am still impressed how well it works every time I use it. If you ever design a Drum sander I would be the first in line to purchase the plans. PS My wife thinks I am the original designer. I can’t design anything good for you to build but if you ever messed something around the house feel free to blame it on me as a sort of pay back for making me look good in front of the wife 😜
I feel like I will probably never get to the stage where I would make one. On that note and what you spoke about project videos with Steve, I think this is so much more context than a plain regular project video. There is a story and reviewing a previous project also means there is so much more learning through the perspective.
Nice to see how few issues have arisen in a homemade tool!
One of the first videos I remember when I found you so many years ago!
Having watched a lot of your earlier build videos when they aired, this video was a nostalgic treat.
Matthias standing on his creations is such a wordworker's flex. Brings a smile to my face.
This entire video is fascinating. I never really think to much about how my tools work, so it is so fun to see exactly how everything works here.
Amazing jointer! This video proved, that this jointer plans is great! 👍
Thanks for sharing update after 10 years!
Matthias - you are a legend. I've enjoyed all your videos over the years. I can't believe it's been 10 years since you built this! Keep up the great videos!
Thanks Matthias, perfect timing on the video, I just recently bought the plans for this and started on it this past weekend.
I built mine using your plans about 5yrs ago. Live that thing. Still works great!
Lovely video as always. The best thing about your work is how enthusiastic you are to share it with everyone. Thanks for another great video.
I have always loved the way that when he reaches the end of what he has to say, Matthias just stops. No closing remarks, exhortations to 'like' or subscribe - the video just ends. But he has mellowed over the years.
It's been 10 years already?! I'm getting old. Well done man!
"dust deflection thingy" I love checking out your videos. It's wonderful to hear how a real engineer refers to things. I love to learn the technical terms for everything..
I love these reviews of how your tools are doing!!!
Wow! 10 years , thank you for being inspiration, I have not built anything near as complex, however i´ve been able to build a decent amount of things around the house thanks to youtubers like you .
Excellent review and revisit of the design! Congratulations- this machine held up, worked very well, and with only minor annoyance level issues... A supreme success all around!
This is good to see. I think I've been watching your videos since back then, indeed.
This guys a legend. I’ve watched him for so long and he’s so underrated
Can't wait to build my own, thanks for the update on yours!
Oh I been waiting for this!!! my delta 8" cast iron, I modded it made a hard maple back fence that extended it out another foot or so tro make it safe, then made that fence about 4" taller. So I started to check the flatness, so I could make the table longer, by a foot or so on each side. ya I stopped lol, I was ready to get the dycam out, a hand scrapers, and flatten it. This is the exact same as well on all three craftsman table saws. I did goto partial school for machining, so my brain thinks like that with wood working sometimes. I always try to remember it does not have to be flawless if i'm the only one looking at it haha.
Great video love seeing the updated even tho I wasn't around for the initial build.
After 10 years I am surprised there is not more dust inside. Impressive build. Thank you for sharing.
Back at the turn of the century I sold my computer program and then went to the hardware store in the big city (Phoenix). The 1st thing I got was my RIDGID planer just like the one you've built. Takes a couple grown guys to lift it. You certainly learned the physics of this very useful tool.
I didn't know a green machine was going to make me feel old today! This was great, and a good way to tease an upcoming motor-change video.
The ease of repair shows how fantastic the design was. Rob
Nice work Matthias! Thanks for sharing the update with us!💖👍😎JP
You're one hell of an engineer, I'll give you that!
Very cool. Thank you for the update. Bought a few things from your website but not that one yet
This was a lot of fun to watch. Thanks for sharing.
Love these updates, glad you're finding more to talk about than you thought. Maybe there will be more? The sticks from the kids made me laugh!
Once again another great video from the Master
Unreal. The 1:00 calculations, 1 millimeter here, 0.5mm there, requiring 1/3rd of a turn on the nuts?
The level of expertise on display here just floors me
Wow. Amazing attention to detail!
This was really interesting to see, especially the ones who haven't seen you build this tool. You should do "update videos" on other tools you have built a while ago and see how they've held up and maybe see what type of little tweaks you could make to them.
That was the first video that I saw from you - I remember being very impressed by the usage of garbage wood for a high-precision - project!
Induction motor is a good choice, but the air noise caused by the gap between the cutter head and the infeed table is also very loud. This is a great machine! I made one four years ago and have been using it ever since.
I used to work in a machine shop running surface grinders a lot. Guys would come in with jointer tables all the time asking us to get it dead flat. One guy even brought it back saying not flat enough. It's like an obsession.
And then within a couple days after being built, it rains, and then there is a week long hot and sunny time and anything built with that machine shop precision will deflect by more than the original deflection of the tool.
I always enjoy your videos.
Beautiful tool, Matthias! Really well built! 😃
Stay safe there with your family! 🖖😊
So interesting! Can’t wait to see the motor swap!
I remember watching you build it and your old shop!!. I've always dreamed about making one, but I don't have either the need nor the ability to make one haha. What I also remember and have been able to make is wooden gears!!
Held up fantastic for a decade
I had a flash of inspiration watching this video that never occurred to me before about these DIY jointer designs. When you said that you couldn't have a rabbeting ledge because the head pulley is on the wrong side I realized that, as a lefty I could build your design mirrored for left hand use, and then the pulley would be on the "rear" of the machine, behind the fence instead of on the front apron where you were forced to put it. Of course this depends on finding a cheap lunchbox thickness planer with the pulley on the same end of the head as the one you used.
I've never seen a left-handed jointer so I never thought of making one. Having one would make jointing a lot easier than using one built for right-handers.
I thought about making a lefty jointer, but decided it was too dangerous to get used to going the other way. what if I did that on someone else’s jointer, or someone else tried using it. but I could just take the fence off and hang off the back. catch is, the bearing block on the other side gets in the way. I could have made that smaller though.
That's crazy. There was a recommended video at the end of this one for an earlier video about the very same jointer, 10 years ago. I remember watching that other one at that time and finding it interesting.. Time flies
Probably the best homemade power tool ever, even exceeding your amazing band saws, and panto router, if only I had access to Birch plywood (or similar).
Haha!!! I love your advice to not check cast iron jointers. So true. They are a pain to get just right. Nearly impossible to get my fence square. Luckily there are tricks to overcome that during glue ups. An amazing tool. If i had the confidence to build something ths complicated, I might give it a go.
Great history, I always loved this jointer. It will be awesome when you add that quiet motor. Will be nice and quiet between passes. I dream of having a thickness planer that is quiet between passes. The most inexpensive route for a quiet thickness planer is a used Shopsmith 12" (which has some interesting features like serrated in-feed roller (on later versions), feed speed control, and a separately available blade sharpening jig using a conical sanding disk).
Gees its been a long time since i work again on hardwood and see your video
Great video.
Request for more "10 years later" videos please 🙂
A small rubber strip would also help on that deflection board for the saw dust I think, but you worked it out :) great video as susal, always an pleasure to watch your videos :)
Yep, I was going to suggest the same but, as usual, Matthias comes out with a creative and effective solution 🙂
Rubber would work but would it survive the next ten years? The wood will wear over the years but probobly last longer than a rubber lip.
Het gemak van de reparatie laat zien, hoe fantastisch het ontwerp was. Rob
When moving several years ago I picked up the VCR and it made a metal on metal chinging sound. I took it apart to find several dollars in change that my kids were "feeding" it. Lol. It wasn't broken but I was amazed howich change it could hold. It was all quarters cause I had a bowl of quarters in my room for the vacuum at the car wash. Now the vacuums are free.
Wild I remember watching the build videos when they first came out
it shocked me te most that i'm wachting your videos for more then ten year
wow, that is awesome. I would love to build one!
Great video !
Great video👍
Very Informative, thanks! I'd love to see an update on all of your bandsaws as well :)
Matthias, thanks for the cast iron jointer. Small in comparison to your current self made version but suits my needs well.
the goat of homeade!
Not crazy 10 years you’ve been using it and y had that many problems minor stuff you couldn’t buy one at the store and get 10 years out of it without no problems you’re amazing dude I have loved watching you build for a long time keep building
I'm SHOCKED that those plywood bearing blocks are still intact. I had a friend machine some steel bearing blocks for the build i did from your plans.
That's absolutely incredible how accurate it has remained with only a few chips of sawdust to clean out.
Very impressive!
It's lasted a lot longer than some brands would buddy. Nice one
So awesome.
Great video
Wow, i watched the original video 10 years ago! Wild
After tearing my thumb off with my jointer a couple of years ago, it sends chills up and down my spine when I see you put stock through that thing without the guard on.
Jamie Perkins on the Perkins Builder Brothers channel did the same thing to his whole hand last year, and has to have a prosthetic now.
Hands down (pun intended), the jointer is the most feared tool in my shop.
Agreed, with routers coming in second. Table saw injuries might be more common, but they're less damaging.
@@jandrewmore With a table saw injury it's usually just a straight laceration, and is easy to stitch up. A jointer just makes hamburger meat out of whatever you put into it. My orthopedic surgeon said it was one of the hardest surgeries to do because he had to get really creative to stitch up what was left of my thumb.
@@kevinniemeyer5938 I think we're agreeing here.
On this one, the gap is so small, you'd have to grind the thumb off slowly, cause it wouldn't fit in.
@@matthiaswandel I don't think volunteers will be queuing up to demonstrate that.
That is amazing to me! Ten Years?! Ive seen many commercial machines that required more maintenance than this after a week! Fantastic.
The knife might need a bit of maintenance. Like dragging a file along its edge to sharpen it occasionally .
Love that machine
You are fantastic. 👍👏
"... and most of those people who made their own jointers are still alive!" :) Keep up the good work Matthias.
well, yes, not THAT many people die in a ten year span.
My wife and I are planning to live with my parents for a year to save up to buy a house. I have all my woodworking tools in storage, but hopefully after a year we'll be able to buy a house and I'll have space to build some Matthias Wandel tools. That's always been my dream.
Nice quick fixes, that was easy! I guess that also says something about how well it works (not implying I could build something like that)
The small amount of ten years worth of dust in the parallelogram box is pretty incredible.
I think the way chips got in there is if a chip gets thrown, bounces off the guard, then collides with another chip to throw it upwards towards the slot.
Well, that was like taking an interesting trip to visit an old friend. :)
Tremendous !
I would watch you do another of these with each of your machines
I've been working on building mine, following the designs! I've torn down an old planer and built most of the base! I'm still trying to figure out a good way to do the baltic birch stuff. It's over $150 a sheet right now.
Very interesting.
When I was knee high to a grasshopper my boss told me respect the [dangerous machine], but since then I've upgraded the sentiment to never forget that the machine is constantly looking for the slightest opportunity to harm you in any way that it can.
To think it's been a decade. Man, time flies away like nothing.
Amazing
Nice!
I bought a 10 inch benchtop jointer and I was thinking about converting it using your plans because the bed mounting hardware on the 10 inch is the same as the 6 inch model and I get a lot of flex at the sides of the beds.
That's awesome
I have not built one yet but when I upgrade my planer I'll have a spare to build a bigger jointer. Right now I have a 4 inch jointer
Pertama saya lihat awal tahun 2012...luar biasa, awet.
"Out " of alignment for 10 years and ... it worked.
good enough :)
I think it got that way gradually.
so many people don't know how to use a jointer, this one included, any wood machinist would have his head in his hands.
The plans only cost $16?? I was expecting so much more, great machine and great cost here. Love it!
Running a board over a jointer, including high end accurate machines, often will leave the edge not straight. To get the edge straight one starts in the middle and works out. This may be part of the reason why European machines use those gap guards, and not the swinging guards, you can actually plane an edge with those, not just run a board through when is may retain the banana edge, or make it worse. There are safety reasons for those guards also.
Super machine, I paid a lot more, it takes up more space and I have 2/3rd of the beam.
3:44 yes good advice 😀😀😀