Milling Rough Lumber Without a Jointer Using a Few Simple Jigs
Vložit
- čas přidán 28. 05. 2024
- Thanks to Policygenius for sponsoring this video! To start comparing quotes and simplify insurance-buying check out Policygenius: policygenius.com/3x3custom
I get asked a lot about which tool to purchase first, a Planer or a Jointer? I always say PLANER because you can get around not having a Jointer with a few simple jigs!
For more details, check out my website - www.3x3custom.com/tutorials/
Planer Sled Video from Wood Work Web - • Planing Jig - How to U...
Using a Router Table as a Jointer Video - • Using a Router Table a...
Tapering Jig Video - • Simple Taper Jig // Jo...
____
AMAZON (affiliate) LINKS
Planer:
amzn.to/364lGnn
Battery Powered Hot Glue Gun:
amzn.to/2Y7q2Ge
Dedicated Ripping Blade (that I should have used... ha):
amzn.to/398Yuqd
Track Saw -
amzn.to/3p8q38w
____
My Amazon Store - amzn.to/2uRpplb
_____
My Recording Equipment
Camera:
amzn.to/2scO0mu
Shotgun Mic:
amzn.to/2rp1ETp
Lav Mic:
amzn.to/34r7Ico
Voiceover Mic:
amzn.to/2rs9TOx
___
FOLLOW
Website - www.3x3custom.com
Subscribe - / @3x3customtamar
Instagram - / 3x3custom
Facebook - / 3by3custom
_____
0:00 Intro
0:27 STEP ONE: Flatten One Face
6:24 STEP TWO: Make The Opposite Face Parallel
7:33 Policygenius Sponsorship
9:13 STEP THREE: Square Up One Edge
15:35 STEP FOUR: Square Up the Opposite Edge
17:18 Some Things to Note...
Links above are affiliate links, I make a small commission if you click on them at no extra cost to you. clicking on them really helps me continue to make more projects :) - Jak na to + styl
I absolutely appreciate that machine sounds are edited down. It's ear-jarring when you're listening to someone's video with earphones on and they suddenly switch on a planer, table saw or god forbid, a router.
Glad you appreciate it.
I can’t count how many time I have seen these techniques demonstrated on youtube, but you put them all together from start to finish articulated, by far, better anyone yet. Thank you.
Exactly!
yes most videos are „let me tell you for 20 minutes how cool my jig is, also play Raid Shadow Legends“
So awesome to hear! Glad it was useful!
This is what happens when you get a woman behind a saw...
They explain things much better because they know that some people don't have a base of understanding to work from.
But seriously, thank you so much. I got most of the information, but I was missing most of the theory behind the techniques. I've been following your channel for awhile now and this is usually the 1st place I go to understand something that I just can't grasp.
I know this comment is almost a year old, but I completely agree. Thank you for taking the time to explain each step so thoroughly. I just subbed. 🙂
I never really understood how to square a board until I watched this video. It`s all clear as a bell now. Thank you.
Awesome
I've seen so many "joining without a joiner" videos. This one was easily the best. Most involved making a crazy rig which was more ambitious than the actual project. Thanks, keep up the good work 👍
This is one of the absolute BEST explanations of milling and 'why' you do certain things to process rough lumber.
So awesome to hear!
You really deserve it. It's awesome to watch your skills, knowledge, and easiness to teach others while doing each step. Again, I deeply appreciate the time you took to reply my comments. God bless you, your family as well and all those who share their comments as well.
@@3x3CustomTamar 🍻
You should be speaker of the house 🏡
Q: what’s that about using odd number and odd number when you X them 9
You talk smooth and get to the point that you want us to “understand “
For me I think you are tough and sensitive,kind,caring,who likes to teach and get others that there is always there is a light and way to get the problem solve.
Good for you learn a lot if I missed some point you explain it again in the different way of
Wish you well
@@3x3CustomTamar as a ticketed carpenter, I have to say this is the most clearly laid out explanation I've seen in person, or on video to explain these concepts. I'll be subscribing
@@3x3CustomTamar unblock me on Instagram? 😏😉😘
Hello. I'm from Russia. I want to thank Tamar for the wonderful videos! Very interesting videos. I don't know English well, but I watch it with great pleasure. I wish America health, success in business and peace. With respect!
Thanks! Glad you like them!
PARANOIDOR....And your English is just fine!
@@dngriffiths8105 Thank you
Watch and learn, is a good method.
May the Lord bless Russia. I have learned a little about your history, geography, culture and language. The people can get along well. It's the bankers that cause trouble. If you and I get along, there's not money to be made.
The best way to get around no jointer is - get good with hand planes - a good jointer and fore plane, well sharpened and set up can give you a flat face and edge to work from in very little time.
Do you use winding sticks for that process?
I am now a student of the University of Tamar. You were born to teach.
☺️☺️🤘
Well said and kudos to that...... she is legendary......!!
Most definitely born to teach. Phenomenal video. Thank you
Couldn't agree more! I don't have the money for a jointer, but have so much rough wood! Now... I don't need one (yet).... Thank you so much for the detailed explanation. I can't wait to try it.
@@jeffanderson8885 agreed !
I've seen these tricks a few times on other channels, but never have they been so clearly explained.
So awesome to hear!
... and charmingly presented 🙂
A sure sign of a competent woodworker is the ability to improvise, make jigs, and build one's own tools. You have the added skill of teaching these in a very approachable way.
Thank you for creating such great content!
☺️☺️ so glad you like it!
Totally agree, here!
competent wood worker if you only knew how dangerous what she is doing you'd never attempt it.
@@geoffreyopulski138 Determining danger is a matter of knowledge, competence, awareness, and fear.
If it's too dangerous for you, don't do it.
@@jimstevetom It's not aout me it's about all the begginners just learning starting to learn this trade.
EXCELLENT EXCELLENT video. I’m at best a couple of weekends a year warrior and your explanation and ability to communicate was perfect. Oh BTW, I was a Director of Communication for three global organizations and I wish people spoke as precisely and cogently as you. Kudos.
I have to agree with a review I read from 3 years ago. I've watched several videos on planer/jointer differences, and while they made sense I still wasn't quite sure I was "getting it." This video explained everything in a manner I easily understood - plus it will save me from buying a jointer at this point. Well done, many thanks!!
Awesome
STRONG video. So much useful information, and so much "why" instead of just "how."
Definitely one of your best!
So awesome to hear! Glad you liked it!
Absolutely agree with you, Vincent. I wish all woodworkers-youtubers would clarify why they are doing what they do the way they do. I am just a weekend woodworker, with just a few power tools, and this is the type of master class that really help me.
thank you , teacher..!!!!!... btw , was that cypress ?
@@guitarman_3693 nope! Ash
EXCELLENT VIDEO!! I love how you explain everything leaving nothing to guess why or how. The quality of your videos just keep getting better and better!!! ❤️
So awesome to hear! Glad you liked it!
This!!!
I agree! Very thorough explanation of all the steps for the process (including jig building tips and alternatives where possible). It's like 5 videos in one.
I just wanted to say thank you for dressing appropriate for the work you are doing. Many of the women on CZcams doing woodworking dress to attract attention to their bodies. I appreciate that you use your chanle to teach about woodworking. Thank you!!!
I second that! Instantly makes me click off their videos! But this one very informative
FANTASTICALLY explained.
Edit: Omg I love you. EVEN EXPLAINED HOW TO SQUARE IT ON A TABLE SAW!!!!!
17 videos later here I FINALLY understand it!
Haha glad I was able to help!
Ok, I figured it out...
I'm in England.
What you call a planer, we call a thicknesser
What you call a jointer, we call a planer.
I've learnt to do simultaneous translation, and it all makes sense.
Keep up the good work Tamar; I love the way there isn't a second wasted in your films, and the aesthetic of your furniture.
Haha! Glad it all makes sense now 😂
Love it - that should be your motto "There's always a jig!"
My name is from jamaica ... love the way you articulate Yourself by demonstrating this video ... well done lady...
Glad you like it!
I love when I watch a video and instead of feeling intimidated, I am encouraged. This video did that. Not only do I not have a jointer, I don't even have a table saw yet!. It's my next purchase for my lowly garage shop for sure, but even that has discouraged me because I always feel like I can't make all the amazing stuff I see in all these videos. Watching you explain all these methods just reminds me that these problems have solutions and they don't all require a very expensive tool specifically tailored to the job.
Thanks for this video, your wonderful commentary, and patiently explained instructions. They gave this amateur some hope and encouragement. Thank you!
So awesome to hear. I love comments like this. I hate when people say they can’t make stuff bc they don’t have the “right” tools. There is ALWAYS another way!
I’m just a hobbyist with a few tools but I wanted to pick up a planer (or jointer) next and wasn’t sure how to proceed. Thanks for the information explained in a clear way for beginners.
Awesome. Glad it helped!
Good advice Eric!
I'm no woodworking artisan - I live in an apartment very high in the sky, for one - but I watch your videos because you come across as the sweetest, kindest, most articulate talented person I could ever have to explain complex art-forms to me. Ever.🙏🙏❤️
Without a doubt, you are the best woodworking instructor I have ever listened to. I am 85 and have listened to quite a few of them over the years, starting with Norm in 1990 until today. Your instructions are complete with full explanations of why you do it that way, instead of just showing how to do it.
Awesome to hear
Dale, I think the fact that you're an 85 year old man and willing to listen and learn from a young woman says a lot about your character. Much respect to you sir.
Just got my first planer and this was super helpful! Your videos explaining things are some of my favourites. Thanks for taking the time to make this kind of content
Finally i’ve got this explained in a easy way. Thanks Tamar,
Glad you found it useful!
@@3x3CustomTamar ..."I had a board that used to be all twisted and wonky"....LOL. I can relate. I have known a few people who used to be all twisted and wonky, but I won't go there. ;-)
@@rayjr62 😂
Always pushing and carrying so much "invisible" lumber when talking, this is some dedication to the craft X-D
😂😂😂😂
There's a lot of CZcamsrs out there that have videos on this subject but I have to say You are one of the best out there at not only sharing information but making it fun to watch. I'm not even sure why I clicked on this (ok I know because I'm a woodworking nerd) but you kept me entertained the entire length of the video. You are really good at describing the problem, presenting other possible problems then explaining your solution, why it works and why other solutions fail. And all with an upbeat sunny personality. If I came here not knowing any of this, I think I would have walked away with a wealth of new knowledge and, no matter what skill level, would understand all of it and be able to apply it to a project. I mean, nobody would mention things like shrinkage and why you milled it oversized but that's great information. Keep up the good work.
So awesome to hear! Thanks!
Tamar, the CZcams algorithm brought this video to me today, and I'm so grateful! You are a terrific instructor! Your knowledge and experience show up as confidence and self-assurance, which are tempered by your humble desire to make these skills approachable to all. Your delivery removes the barriers so that viewers (me included) can see themselves moving forward on their own creative projects. I'm now a subscriber and look forward to seeing your other videos. Well done!
explained very well, you are a good teacher, greetings from Germany
Glad you think so! ☺️
Yes! Yes, exactly! I have been watching other videos and they talk about squaring the board but never really describe the why they do the steps they show. It’s like light builds turning on all the time with her videos. Excellent job 3x3! I appreciate it!
@@reid211 really so awesome to hear
@@3x3CustomTamar I give credit where it's due, take a bow 3x3, You all ROCK!
How thick should the MDF Base Plate be? Sorry i am also German WE need numbers. Thanks for teaching.
This method WORKS!! Before I got my benchtop jointer I used this method with my thickness planer to get rough timber completely flat and square for glue-up and segment wood turning. Thanks for showing us how this works in this well explained common sense demo! 👍🏾
i don't know much about woodworking, but you explain really well, things in perspective, and most important.. make people happy chasing to learn..
Awesome to hear!
Watched half a dozen videos on jointing a board without a jointer. This is hands-down the best one. Thank you so much
Awesome to hear!
I've been working through a big stack of lumber from our family farm using the planar methods from this video. Thanks so much for making it!
This is one of the clearest explanations I think I've ever heard. Thanks!
Awesome to hear
Whenever it's been awhile since I've milled lumber, this is the video I come back to for a refresher. Such a great explanation! Thanks Tamar!
Glad it was helpful!
Probably one of the best, most thorough videos on this process.
Out of many videos I’ve watched to try and get my head around squaring up pieces, this is easily the best! Great explanations - thanks.
So awesome to hear!
OMG! One of the best videos I've seen in months, especially since I purchased my planer and am still just a year in of woodworking. You added info that you didn't have to, yet I needed to hear it!! Thank you so much for advancing all of our woodworking knowledge. Keep em comin!!!
Awesome
@@3x3CustomTamar I have to say, I agree with beast, here. Most videos simply say "here's how!" and leave it at that. I LOVE the way you presented the content and gave explainations as to WHY it works, not just the mere fact that it works. You answered all my current questions in the best way possible AND you've earned a new subscriber tonight. Thank You!
I'm just starting to get into woodworking, and this video was AWESOME. I was anxious about how I would mill stuff, and this all makes so much sense.
Value of ‘stickering’ lumber after is flat & squared is often overlooked- but essential. VERY GOOD POINT. Thanx!
👍👍
Wow you’re a rock star. You explained this so much more thoroughly. As a dude you’re expected to know so much of this stuff so they just show don’t tell.
Great video Tamar, I was woodworking for a long time before I learned the planner sled trick. A couple of tips, my planner pulls my board forward, so I always run the sled through with the end with the stop block first so it is pushing against the block. When you are looking to square the first edge of the board on the table saw, pay attention to the grain on the face of your board. You may have some sap wood that you would like to trim off or you may have straight grain (think quarter sawn or riff sawn) running down the board where you want to plan to keep the orientation straight instead of having it running off the side of the board at one time.
I had sleepless nights about buying and fitting a jointer in my small shop - this video saved me! Thanks a million!! Take care and God bless!
Awesome
You’re an excellent teacher. This was a textbook example of every single skill we try to emulate in top tier universities teaching engineering. Hats off!
Glad it was helpful!
I am a little "elevated" at the moment, but i found this video probably one of the most important ones in my woodworking learning. I had a really hard time understanding how referencing off a guide once and creating "flat", without squaring it up. You explained it so well and i really appreciate it!
Wow, that really blew my mind! Been looking all over to see how it gets done without a jointer and you even explained it so perfectly. Many thanks, Tamar. 💯
Awesome to hear! Glad it was helpful!
Tamar, it's truly a pleasure to watch you explain and give us viewers of your channel a way to solve different problems. Thanks for sharing your innovative ideas.
Fantastic instruction. I have a table saw, sliding miter saw, and a small table mounted router. No jointer or planer. Planer is next. Thanks to you I will be able to joint rough wood.
Awesome
You have quickly become one of my favorite woodworking channels. You have a wonderful skill and a great mind for problem solving. You are a blast to watch and so easy to learn from!
Awesome to hear!
Love watching all your videos. It’s nice to see how to do so many different things and jugs to perform complex operations in a simple and easy way. THANK YOU
TONY
Thanks! Always more than one way to achieve the same goal 🤘
Extremely helpful. Trying to get my own garage workshop started, and this helps me save space and lots of money. Thank you!
This video is one of the best examples that money is no problem when you've got creativity and wit. Thank you so much for sharing, you're a true inspiration, Tamar! ♥
Glad you like it 👍
This was great! The most thorough, concise, and enjoyable video I've seen about this process
So awesome to hear! Thanks!
Your explanations of all the steps are the best I’ve ever seen. I feel like I just learned more in this one video than all other woodworking videos I’ve seen combined! Thank you! Can’t wait to watch more of your videos!
Glad it was helpful!
Dont forget the humble hand plane, its often quicker and easier to square small parts with a plane and straight edge, good video, great presenter.
After all the years of watching youtube, this has to be the most useful one ive watched! Thankyou for explaining it so clearly
Glad it was helpful!
You're amazing. The video was pretty clear and I love how even though it's an intimidating process to beginners, you made it seem so easy to try. Thank you.
Glad you liked it!
This is amazing! I’ve taken a few woodworking classes using industrial quality machines, but seeing it done with the tools you have makes me want to get back into it, without investing in a huge workshop and tools
Thank you!
Awesome to hear! Go for it!
What a fantastic video ! Thank you so much for taking the time to put this out there. It has really simplified the whole process and will save a bundle of time and money ! Seasons greetings from the UK.
Greeting, Tamar: Your videos are the best! I watch many woodworking videos, and yours are the best I have seen. They are very informative, and your presentation/delivery is easy to follow, appropriate, and watching/listening to you is very entertanining. Thank you for your efforts to help us less skilled woodworkers get better at what we love to do. You're the best. All the best to you. ~Robert
This is one of those great videos where you say "ahhh, now I get it”
Awesome
Thank you, Tamar!! I just bought that mac daddy Dewalt planer this past weekend and now I know how to get the most use out of it
Yes!!! It’s going to change your life. Ha
What a wonderful demonstration of how to square up boards when not using a jointer with perfect clarity. Thank you so much.
Your explanation is nothing short of “superb”! Thank you!!
Tomorrow morning I'm picking up my very first planer, so I'm sort of binge watching videos about how to use a planer, and gotta say that this is the best one I've seen, so far. Thank you very much, greetings from Chile!
So awesome to hear! It’s going to change your life
I’ve watched this multiple times, now put it to practice several times with my thickness planer and I’m so grateful for these tips!! Now watching again to see if there’s anything I’ve missed, and continue trying to master it!!
Awesome!
AWESOME JOB on the instructions, Tamar, as usual!!!!👏👏👏👏👏👏
Okay I swear that I’ve search for so many tutorials of wood working and women are so much more informative and clear. I am learning as I go and as a woman I appreciate your tutorial! You answered just about every question I’ve had.
I tend to agree, but I can't say that there's an objective reason as I have a bias against men.
Best explanation I have seen of this. It gave me several new ideas. Thank you. I will also add that, next to the tablesaw the jointer is probably the most dangerous tool in the shop. A co-worker recently cut finger tips off, will be needing surgery. All the methods you showed here are safer than that. I also hope that a Sawstop is in your future. With the amount of time you spend in the shop, the amount of work that you do on the tablesaw it would just make sense to protect your fingers and hands. Patreons maybe?
She is really charming. Fantastic breakdown and explanation for this process from beginning to end. Well done.
I have seen a lot of women trying to be a joiner but I have a lot of respect for you you know your thing and you are good at explaining it to people. 10 out of 10 and I have learnt some new things from you your a new 🌟
I can’t count how many videos I watched just to get the information you gave in the first 5 minutes. The rest of the video was straight bonus material. Great demo and explanation ! Thanks!
Awesome. So glad it was helpful for you
Brilliant tutorial with lots of great advice along the way. I'm just waiting on a Triton TPT125 that's coming today and this will really help when I come to mill my own pieces. Many thanks.
Awesome!
Good tutorial! I think you and Stumpy Nubs have talked me into buying a planer before buying a jointer. (Don't have enough money for both right now.)
Thanks! Yes! You can get by without a jointer. But a jointer is kinda useless without a planer.
same here. I love Stumpy Nubs too.
Planer is WAY more useful around the shop for general overall use than a jointer, if you could only have one. I consider a planer an absolute necessity and a jointer more a luxury. Unless you are doing a lot of edge jointing for panel glue ups, etc you really can get by for the most part without a jointer especially when you consider their price.
As a former (recovering) Engineer, your description really satisfied my need to understand establishing a first side reference!
Love your smile while you are explaining. Keep doing it, please.
☺️☺️
Thanks for explaining both the steps and how the tools actually work. Also, I’m a big fan of your editing style.
Glad you like it all! Thanks!
@@3x3CustomTamar Do you do your own editing?
@@NothingOfficial668 yup. I do it all
I’m really glad that you mentioned inner-moisture content and correcting for it. That’s a detail that I was unaware of… for longer than I like to admit. 😂
Really great videos! I get at least one great tip out of every one. Thank you! 😊
Glad you liked it!
I enjoy videos with well enunciated, well spoken, intelligent people. Great job, great information.
Ha. Glad to hear
This is incredible! So many tips and tricks on why things happen with the wood that I sometimes couldn’t seem to figure out!!
Parabéns pelas explicações. Sou brasileiro e sigo seu canal. Show
You remember years ago when you said, "I'm a little afraid of working with power tools?" All these years later and you are MASTERING THEM! I'm so proud of you. Just one more project I have to see before I die. Fix the garage door handle.
Ha. One day I’ll get around to it
What a marvelous idea! I've been looking into getting a planer or a jointer but I just don't have enough room for the both of them in my garage. This willl probably be my next major purchase! Thanks for the easy to follow explanation and the in depth look at the cause and effects of your process!
Have a great day!
your wood working skills are clearly evident, but your true talent is your detailed explanations including loads of variations for many differences in our individual situations. love it. whenever I’m hunting a specific skill, technique and I see you post on that technique I look at yours and end up clearer and more confident than before. much appreciate.
That’s so awesome to hear. Thanks!
God bless you girl! Like you, I'm in the North East. My shop is in a separate three car garage and since it's 17 degrees this morning it would take 6 or so hours to bring the temp up enough to be comfortable................so I'll watch you instead...LOL
PS....Bundle UP!
Haha yeah! It’s so hard to work out here! Do what you gotta do though...
I had a sneaky suspicion u were from the north east USA from a few words your accent really brings out, reminding me of Steven from the Arabella project... who I believe is from up there...loving their work too👍😃🇺🇸🥶❄️
@@plssmellmycheese hah yup! It’s so cold today.....
@@3x3CustomTamar try living in Winnipeg. -14f right now. I'll stay by the fire today. 😀
@@scottroy6195 was 20 today! I was inside by the fire as well ☺️
This is cool, love the tips. When I score myself a table saw, I need to make that tapering jig. I've been using my router and a bottom bearing bit to do basic joining but this seems easier
Glad you like it! Yeah. Router works fine. But table saw is easier. Ha
Google "makerspaces near me" - most have a woodshop
I’m new to woodworking, just started to do some basic stuff (trim, moulding, etc) and kinda got the bug. Your channel is a gold mine of amazing info 🙏
One of the best how to videos I have ever watched on CZcams. Not just woodworking but all DIY subjects.
Awesome to hear
I just bought my first thickness planer, and am excited to put these lessons to use! Thank you for an awesome tutorial!
Awesome! Have fun with it!
Great video, Tamar. The new backdrop looks good. I'll bet it brightens up the shop a bit.
Btw, I think you should get a heater before the jointer. ;)
Haha yes. Heat is more important!
Wonky…this is a technical term!!! Thanks for explaining the whole process so well. I’ll be rewatching your videos for the jig too
Yes. A very technical term. Ha.
This is THE guide for milling skillz. Nailed it. Even when others have already covered it. Thank you!
The “weird edge”, is a waney edge. Meaning an adage cut too close to the bark and new growth, resulting in an uneven surface.
It seems to me you set this up to run the jig through backwards. The feed rollers will try to pull the wood forward on the jig not backwards. The block attached to your jig should be on the front not the back. Obviously it worked, but is technically backwards.
RexSeven not really, the jig is set up the right way. While the roller pull the wood through, the cutter head spins the opposite direction as the roller, the cutter head has much more force and power to kick the wood back. I would set it up exactly as she is describing in the video.
Haha! This is one of the most common debates. To be honest. I have done both and see the merits of both. I think the hot glue is really doing most of the work though, so in my opinion, it actually really doesn’t matter....
@@3x3CustomTamar thank you for your great video Tamar.
@@behradgorgani I've seen wood go through slower than it should and I've seen it stop when rollers are damaged or dirty. I've never seen a board go backwards. Ideally, you would have a block front and back, but if I could only have one, I'd put it in front. You can put it wherever you want.
I tried the stop at the back but I had problems with the board sliding forward so I now have the stop at the front. I tried hot glue but the board moved anyway so I covered the top of the jig with rough sandpaper so the friction helps the board stay put. I also top the shims with a piece of rough sandpaper and everything stays in place.
Adding to the praise! It is so great to watch you skillful explain and demonstrate all the techniques to go from raw wood to a clean piece of lumber. Also, that is a lot of wotk for a 2x4 😊. Appreciate the work of woodworking even more
Great video. Very well explained too. So many vids are produced, on various woodworking subjects that leave a heap of information out. For example, setting up a set of draw slides. They only mention about setting them up on the carcus. Then leave you hanging on the draw, or don't tell you how to line up and install the draw front. Again Great video thankyou!
So glad you liked it! There’s really just so much information when building a full project that a lot of it gets glossed over
If your planing thinner materials sometimes you can’t add enough shims to keep the planer from distorting the board. Here is an added strategy for complicated boards.
czcams.com/video/qPBD_AJsVCM/video.html
Shout out to Jonathan Katz Moses for putting this video together to demonstrate my method.
The only thing you missed is if you have severe twist you should shim both ends 50%
Yes. This board didn’t require that! But yes. Shim wherever there’s a gap
Great instruction and also extremely articulate, and no BS long-winded intro. I love this woman.
Great tutorial. Nice person. Nice style. Technically coherent. Terse. Intelligent. Effective. (Hated the "ad".) Loved her!
Ha. Kids gotta eat…