- Please note: ONLY Elite Foreman will receive the riser blocks. Journeyman and Woodworker versions use the x-35 rails that do not need and will not receive the riser blocks. - DO NOT THROW AWAY THE RED BUSHING in the motor coupler! They must be installed for the machine to move correctly! forum.onefinitycnc.com/t/red-bushings-on-motor-coupler-what-is-it-do-not-throw-away-faq/24424
I bought a OneFinity Journeyman X50 last July 2021. Infinite Possibilities Upgrade Program began in 2021. So far, nothing! Somewhat less than totally thrilled with my purchase.
They are going to add the upgrade down the road. Right now they are just trying to get elites out to people who bought them then they are gonna add the option later to upgrade.
I am anxiously waiting but not ready yet as I don't have my table build yet. I am waiting on the overall dimension for my elite journeyman before I can build the table to the spec.
Hoping 1F is making optional wiring to be availabe for users to NOT mount their controllers ON the 1F machine. It will not be a preferred location for many users.
Masso cover says install battery first? When i scan the qr code it takes me to a different masso video. Does it really need a battery inside or what ty
Why don't you show how and where to plug a spindle? Most people who buy elite series will go for spindle and not a small router. Pawn CNC just came out with automatic tool changer for their spindle. Also what about 4 axis rotary attachment assemble and support? Are there any 4th axis options?
On my Journeyman Elite, the stepper motors are not installed - they are labeled, though. Where do they go? I am assuming on the back of the Y gantries? Does it matter which motor goes where - and is there a recommended orientation?
We changed up the packaging since this video was made as the motors were getting damaged in shipping. All motors are the same, it doesn't matter which on you put where.
The QCW has built in T track. If you do not get the QCW, you'll want to configure your wasteboard to your needs. Some install t track, some use @myerswoodshop wasteboard with t nuts, some use pin nails, and some use blue tape and CA glue.
- Please note: ONLY Elite Foreman will receive the riser blocks. Journeyman and Woodworker versions use the x-35 rails that do not need and will not receive the riser blocks.
- DO NOT THROW AWAY THE RED BUSHING in the motor coupler! They must be installed for the machine to move correctly! forum.onefinitycnc.com/t/red-bushings-on-motor-coupler-what-is-it-do-not-throw-away-faq/24424
Thanks for posting. Looking forward to future videos on the elite while I anxiously await my machine!
More to come!
Really seems straight forward . Thanks for posting for your customers. I also waiting BillyCooter. The waiting is the hard part.
Glad you enjoyed it!
Great looking machine. Looking forward to upgrading in the future
Right on!
I bought a OneFinity Journeyman X50 last July 2021. Infinite Possibilities Upgrade Program began in 2021. So far, nothing! Somewhat less than totally thrilled with my purchase.
Glad you like it!
They are going to add the upgrade down the road. Right now they are just trying to get elites out to people who bought them then they are gonna add the option later to upgrade.
Looks great guys. Hope you're working hard on my foreman order. 😃
Yes we are
Can't wait for my E4 from 1F!
We can't wait to ship it!
78 3/16" is the corner to corner measure if anybody was wondering
Great catch.
Awesome,,, waiting on my Journeyman elite,,, June they said.
Good things take time :P
“Right y-rail” @ 12 secs… what a tongue twister!
Sure is!
That CNC is gonna bounce around if you never screw the Y rails down!
Screw them down!
@@OnefinityCNC yup. it was a bit of a joke.
I am anxiously waiting but not ready yet as I don't have my table build yet. I am waiting on the overall dimension for my elite journeyman before I can build the table to the spec.
Check the forum.
Hoping 1F is making optional wiring to be availabe for users to NOT mount their controllers ON the 1F machine. It will not be a preferred location for many users.
We have extensions for the Elite in our web shop here: www.onefinitycnc.com/product-page/2-pack-cable-extensions-2-foot-long
I’m planning on purchasing an elite woodworker and getting it delivered to the UK. Will an adapter to UK 220v work?
it will come wired and the proper power supply for your country.
Masso cover says install battery first? When i scan the qr code it takes me to a different masso video. Does it really need a battery inside or what ty
we install the battery at the Onefinity factory. Disregard that part!
@@OnefinityCNC ok ,thx
Why don't you show how and where to plug a spindle? Most people who buy elite series will go for spindle and not a small router. Pawn CNC just came out with automatic tool changer for their spindle. Also what about 4 axis rotary attachment assemble and support? Are there any 4th axis options?
Hi. It’s because we do not offer technical support for spindles. You’ll need to contact your spindle provider for assistance.
Hello. Is there a good video for trimming the Onefinity Elite? If not can you do one please.
Chris
We do not.
On my Journeyman Elite, the stepper motors are not installed - they are labeled, though. Where do they go? I am assuming on the back of the Y gantries? Does it matter which motor goes where - and is there a recommended orientation?
We changed up the packaging since this video was made as the motors were getting damaged in shipping. All motors are the same, it doesn't matter which on you put where.
@@OnefinityCNC Thanks - being a newbie I was not clear on what B1 was, so that was confusing me. I have them installed now, thanks!
@@NeilBlanchard Great! If you ever need anything just let us know.
@@NeilBlanchard awesome
Does that power box on the right..is that the one for UK plugs?
Yes, left is North America, right is UK and other 220 countries.
What specific M codes turn the router and vacuum relays on and off?
czcams.com/video/ZOKcmmOO3gQ/video.html
Are you going to sell those riser blocks separately?
No. You only need them if you get the foreman, and every foreman will include them.
Is the spindle connector on the bottom of the Masso Screen a GX12 6 pin Male or Female?
amzn.to/3zHukqF
Ari ing tomorrow!
Fun times ahead!
Is that 3rd rail really needed with it already having 2 large rails?
Some users think so, some users think no.
So NO t-rails come with this unit? I guess you just tape your work piece down to your MDF table top? I don't get it.
The QCW has built in T track. If you do not get the QCW, you'll want to configure your wasteboard to your needs. Some install t track, some use @myerswoodshop wasteboard with t nuts, some use pin nails, and some use blue tape and CA glue.
where can i get it in EU
All machines are shipped and sold from Canada! We ship world wide!
So what about the stiffy you didn't show that
In it's own video here: czcams.com/video/RCIEqLnvU4Q/video.html
How much to replace the Elite Series Masso Controller if it fails after warranty period?
Retail price.
@@OnefinityCNC
Elite Forman 52” apart not 48
Elite cutting area is 48x48
hook a brother up with a discount code and I'll buy the best of everything you got. :P ain't lying at all.
Everything is already discounted!