Was able to get this working using the latest unity engine, and the XOOrigin instead of AR. 99% of it is still exactly the same. Only thing I would ask in the videos, is slow down a breath between changes so we can actually see what is being done. I had to play a couple sections more than a few times to understand what was actually being done. Thank you either way.. this helped me get much further in this area. :)
Excellent stuff, many thanks - my one misstep when building and running this was that my wee dragon was flying about the place facing downwards; but then I realised that it was because I'd scanned my monitor for the GoT pic (which is of course vertical) instead of scanning the image on a horizontal plane - when I did that, all was well 😎
@@Mashrath.dudekulaMashrath I opened the image on my tablet and laid it flat, then scanned it using my phone - I did also try printing the image, which worked too.
@@swatiraykar2563I opened the image on my tablet via the image link provided in the description above, then I scanned the image using the app which I had installed on my phone. Hope this makes sense 😊
Thank you for making this great tutorial! This video was really explained right to the point! I got instant gratification from doing this one 🙂 Alot of fun!
I am helping my daughter with her school project. I am a complete newbie in building a VR app. I have stumbled my way through to the end of the build step, corresponding to time stamp 16:45 in your video. What to do after that? GOT image is an asset already, how do I scan image and get the game started? And how do I close down the app and then run it again? Is the computer always needed or the app is on the phone now? Thanks!
This is actually an AR application. You can open the image on another device and scan it using the device you build the apk into. You can exit the app like you do with any other app. Nope, you don't need a computer once it's built onto a phone.
There could be several reasons, make sure your device supports AR core, make sure you have enabled AR core in the XR plugin management, if you are using URP there are some additional steps you need to take.
Im getting the following: The type or namespace name 'AR' does not exist in the namespace 'UnityEngine' (are you missing an assembly reference?) The type or namespace name 'ARTrackedImagesChangedEventArgs' could not be found (are you missing a using directive or an assembly reference?) The type or namespace name 'ARTrackedImageManager' could not be found (are you missing a using directive or an assembly reference?)
I get the following error: Assets\PrefabCreator.cs(19,31): error CS1061: 'ARTrackedImageManager' does not contain a definition for 'trackedImageChanged' and no accessible extension method 'trackedImageChanged' accepting a first argument of type 'ARTrackedImageManager' could be found (are you missing a using directive or an assembly reference?)
Are you using the Unity Hub for adding modules? How did you install the Editor? Separately or from Unity Hub? I would recommend you try and install the Editor from Unity Hub
Hey, this video was meant to get people started with AR. We have a detailed and slower version for ARFoundation, which you can check out here: czcams.com/play/PL4g4CxkYXn3sjtFTSEW0uGv8J9QLsEWm8.html
Good evening sir the last part of the code when i try to build n run in my phone it is showing error in code and how to scan the image can u please let me knw soon theafter tomorrow i have project review
*Hey man. GREAT JOB*... I am using 2023.2.19f1. The only problem that i am facing is that controller doesn't work. Dragon appeared on image target but it is stacked on it. Just Take of and not going anywhere while i am moving the joystick. Any idea please?
When I run the application on my phone, it says I need to update Google Play services, but when I try to update it, it gives the error that it is not suitable for the phone. I tried it on 2 phones, it gives the same error on both of them. Is this error related to phones or can I fix it from Unity?
I am not sure how to fix that since I don't use MAC, however, google suggests that you need to have Android Studio downloaded. Maybe you can check out more on that.
Yes its compatible with AR (Galaxy S20 FE) it is in the list. The joystic is visible camera is able to view the surroundings but when I focus towards the image , there is no response. I am very happy to get immediate reply. @@immersiveinsiders
@@immersiveinsiders alright, thanks man really appreciated. You are doing a great job, will be waiting for some more videos on AR may be with character/ animation this time 😃
Hello man thanks for such a lovely tutorial. I wanted to know if you could guide me to add other models with different images to add to the project for experimenting with sound
HI, thanks for the amazing video! I'm wondering if this is also available for iOS. It seems like I need to modify the 'Build settings' step and then select 'iOS'. Right?
Hi, when we use Amazon shopping app or any other app which provide "AR view" feature, we place our phone's camera on the floor and click on the image from the app. In the next step, a augmented object is created and appear on the screen. Is there any role of the phone on creating this augmented experience or it just the App server which creates the augmented effect and just sends to the app? Could you give any idea on this. Please reply, I need this for my college project.
What they are using is something called WebXR and embedded that in their app. So to answer the model is coming from the server but it uses your phone’s sensor and computing augment.
@@vishaldewangan9393 right now there is no budget AR headset. All are quite expensive. The best right now would be Quest 2/ Quest 3 and development for mixed reality.
Hi bro, in my unity I only have XR Origin, there is no AR session origin, are the two the same? After I tried using XR Origin and extracted it to .apk, the display only turned black and all that was visible was the joystick. please help
@@devv000 It's now updated to XR Origin. The rest of it remains the same.You can refer to the latest video for setup here: czcams.com/video/yfyEAhl8mSQ/video.html
@@immersiveinsiders i dont know anything about code and was very confused with the color coding and like the little popus u had everytime u typed and mine wasn't so i just copied everything letter by letter
@@ayushsinha1376 that's because the preferred editor is not set. Click on Edit -> Preferences -> External Tools -> Select Visual Studio as the External Script editor.
I'm planning to create this for my college tech fest. I want to add a model feature like we have a record 360 view of a person from our phone then their 3d model will generated and then we can control them through joystick. Can you help me in this
What you want to do is possible but it's complex. You'll not be able to create a person's 3D model from a 360 video. There are some software you can use like Luma but not all phones are supported. After you get the 3D model you need to rig them manually using Blender. Then you can import it into unity. Use Mixamo animation, add it to the 3D model, and then finally you'll be able to control it.
I have a mini-application where the car drives on the roads.. Just in the application, the car drives perfectly. But I tried to make an AR application using Vuforia. The car turns the wheels, they turn if you press W/S. But the car doesn't drive
great video but I need help, for an hour i was confused why dragon is not showing up on scanning the photo but than i realise it deployed but in a very small size and the offset is way too much from the image as i want the summoning of the dragon just above on the image but it is not happening as considering {the offset is -0.01 still it is summoning far away from image and is there any way we can test our AR in unity itself as it is difficult ot test it on phone everytime , like emvironment where we can test our AR app in unity can you make video on this and why my dragon spawn is offset from image can you please answer this in the comment .Thank you
Hey, if you follow the video correctly it will work, I would recommend you do double check it. To test the scene without building you can use the simulator: docs.unity3d.com/Packages/com.unity.xr.arfoundation@5.1/manual/xr-simulation/simulation-getting-started.html
Bro i developed the app and deployed it on my mobile but it asked me to install google play service for ar but in Play Store it ahows this version is not compatible for your device. Then how will i test my app?
help me, unity throws me this error "UnityEditor.BuildPlayerWindow+BuildMethodException: 4 errors at UnityEditor.BuildPlayerWindow+DefaultBuildMethods.BuildPlayer (UnityEditor.BuildPlayerOptions options) [0x002da] in :0 at UnityEditor.BuildPlayerWindow.CallBuildMethods (System.Boolean askForBuildLocation, UnityEditor.BuildOptions defaultBuildOptions) [0x00080] in :0 UnityEngine.GUIUtility:ProcessEvent (int,intptr,bool&)"
Hello and thank you for this wonderful video. I really enjoyed following your instructions and was able to build everything as you said however, I’m at the part with an iPhone and I’m confused I’m gonna hit building and run but I don’t know whats gonna happen, we’ll see. I was hoping that you had something about IPhone setup somewhere. Have a great day tho much respect I am going to subscribe to your page.
Hi, the setup for iPhone is slightly different, instead of AR Core you need to check ARKit. Also, you need a Mac to build it to iso, you cannot use a Windows pc.
Good evening, congratulations on the video, I'm starting with AR, I would like to know if there's a way to add a button that makes the dragon release a fireball?
Yeah, it's possible. You need to have a fireball effect in place. Add a UI button and use the 'OnClick' property from the button component to play the effect.
after following this tutorial i keep getting a gradle error. It wont let me build the apk. Ive searched everywhere for a fix, and made my own keystore but it is unable to be installed on my phone, the apk. Im confused because my other AR project work normally and i have no issue in building the apk. But this one in particular keeps giving me building apk error related to gradle
it is unable to build and run these are the errors BuildDatabase FailedException: arcoreimg failed with exit code 1 and stderr: WARNING: Logging before InitGoogleLogging() is written to STDERR ! [18:22:40] Error building Player: BuildDatabaseFailedException: arcoreimg failed with exit code 1 and stderr: WARNING: Logging before InitGoogleLogging() is written to STDERR ! [18:22:40] Build completed with a result of 'Failed' in 0 seconds (293 ms) 2 errors
It's hard to tell what's wrong without having a look at the script. Maybe you can join our discord server and share your code there. discord.gg/n45XBeaf
Hey! I need help with the part after the script writing. After script loading I do not get the option of dragon prefab or offset. Can someone please help me with how i can fix it, its urgent.
AR is relatively easier to learn when compared to VR. You can start by understand how Unity works and basic C# programming. Then you can learn about AR Foundation and AR core which are supported on android devices. And with all these knowledge you'll be able to make an AR application.
@@immersiveinsiders i enabled it but after that it is unable to build and run these are the errors BuildDatabase FailedException: arcoreimg failed with exit code 1 and stderr: WARNING: Logging before InitGoogleLogging() is written to STDERR ! [18:22:40] Error building Player: BuildDatabaseFailedException: arcoreimg failed with exit code 1 and stderr: WARNING: Logging before InitGoogleLogging() is written to STDERR ! [18:22:40] Build completed with a result of 'Failed' in 0 seconds (293 ms) 2 errors
ARcore XR Plugin is being enabled and XR plugin Management is also being enabled but after I press on bulit and run its just showing me a blank screen on my mobile and Im not able to scan the image...I have double checked that ARCore XR Plugin is enabled . Could you please help to resolve my problem....and I even want to know how to scan the image, I mean can we forward the image file to others and open it then will we be able to scan the image
There’s only way you can debug you app. Follow the steps mentioned in this video and see if the console prints any error. czcams.com/video/XC8paPOn268/video.htmlsi=enfhIeXRcur-UBG9&t=264
@@immersiveinsiders initially i had problem with ndk which i installed by downloading from android studio after that when i click build and run it gives me error saying " A failure occurred while executing com.android.build.gradle.internal.tasks.Workers$ActionFacade see console" something related to gradle error. Is there anyway for me to send u a ss of my console. Thank you so much for responding .
@@immersiveinsiders i did, now the camera works and everything is visible when scanning the image i want, but the thing is now i can’t press the buttons, whenever i press them they don’t work
What exactly do you do after 'Build and Run'? It didn't work for me, although my phone was connected Unity failed to recognise it. How do you access the app after you've built it, does it appear on your phone as an app?
Hey! 1st you need to make sure you have the developer mode enabled on your phone. Then make sure Unity recognises it, then you can build and run. That will creat an APK file on your PC as per the location you had chosen and it’ll also create an app on your phone. Yes, it’ll appear as in app on your smartphone!
Seems like you haven't set up the external tools correctly. Or the version might be different. Check out the "Guide for downloading and assigning Dev Kits" section of this blog but install the latest versions. immersive-insiders.com/blog/set-up-your-ar-app-for-the-google-play-store
Hey, do you have any idea why i would be getting "ArgumentException: Getting control 1's position in a group with only 1 controls when doing repaint" error?
Do you also want to build an MR app in only 15 MINUTES? Check out this video - czcams.com/video/L8Ljj-FlufM/video.html
can you include source cause in videos also give for this one please
@@1936.tejas._xyz its already available on our Discord server. Feel free to download it from there. discord.gg/d8g3wJxP
@@immersiveinsiders i cannot be invited to this discord link.
This was a really cool AR app!! Had alot of fun building it!! Thank you for the tutorial!!
Really happy to hear that :D
What's The Game Called?
Was able to get this working using the latest unity engine, and the XOOrigin instead of AR. 99% of it is still exactly the same. Only thing I would ask in the videos, is slow down a breath between changes so we can actually see what is being done. I had to play a couple sections more than a few times to understand what was actually being done.
Thank you either way.. this helped me get much further in this area. :)
true.... was little fast to learn for beginner like me... but youtube did have pause button for that😂issue
excuse me so the app is working on which type of devices?
Hello how to scan that image I am not getting just im seeing that dragon in my mobile nd by using joystick I'm moving that
Excellent stuff, many thanks - my one misstep when building and running this was that my wee dragon was flying about the place facing downwards; but then I realised that it was because I'd scanned my monitor for the GoT pic (which is of course vertical) instead of scanning the image on a horizontal plane - when I did that, all was well 😎
How did u scanned that got
@@Mashrath.dudekulaMashrath I opened the image on my tablet and laid it flat, then scanned it using my phone - I did also try printing the image, which worked too.
how did you scan your image in this project ?
@@swatiraykar2563I opened the image on my tablet via the image link provided in the description above, then I scanned the image using the app which I had installed on my phone. Hope this makes sense 😊
Thank you for making this great tutorial! This video was really explained right to the point! I got instant gratification from doing this one 🙂 Alot of fun!
Great to hear!
Sir can you please provide full project? So that i can install this project on my laptop? Please please
We don't have the source code, but you can download all the scripts and references from our Discord server: discord.gg/yfxGUb4M
@@immersiveinsiders thanks) ; what does my image extension should be?
are you to make this tutorial in unreal engine please? thanks!
you have to press patch and run after the build and the image tracking doesn't work, so just drag the prefab into the scene
Love to see these amazing software and skill
Thank you❤ You really saved me😭♥️♥️
Great video. Enjoying getting this education. Rifle is fine.
Maybe dumb question,but after making this app can i test it with the real ar/vr headset? With my hand gestures on the air controlling
Note really! the headset should support google core and obviously you'll need to configure it with hand tracking as well.
Thanks for the great video, it was really helpful, it worked for me, i followed each and every step.
Glad it helped :)
AWESOME, even better than do it, is playing with it😁
Could u please share the code link.. like in gith hub or something?
It's quite a simple project so we don't have a github repo for that sadly.
Iam getting object refference not set to an instance of an object in dragon controller
@@Mashrath.dudekulaMashrath you might not have added the reference or there might be some other issue. Make sure to follow all the steps in the video.
I am helping my daughter with her school project. I am a complete newbie in building a VR app. I have stumbled my way through to the end of the build step, corresponding to time stamp 16:45 in your video. What to do after that? GOT image is an asset already, how do I scan image and get the game started? And how do I close down the app and then run it again? Is the computer always needed or the app is on the phone now? Thanks!
This is actually an AR application.
You can open the image on another device and scan it using the device you build the apk into.
You can exit the app like you do with any other app.
Nope, you don't need a computer once it's built onto a phone.
a quick question.
what is the file size of this whiole project?
Do you mean the APK or Unity project?
how can i set multiple prefabs instead of one?
cool video)
i love ar
Hi , My devise camera is not open i follow all your instructions pls give any solution if u have
You mean you see black screen?
@immersiveinsiders i have made it but its not moving it is only flying at a place can you kind me for the same
its showing a black screen on my android phone even tho i have given permissions can you help me with that ..... ?
There could be several reasons, make sure your device supports AR core, make sure you have enabled AR core in the XR plugin management, if you are using URP there are some additional steps you need to take.
hey can you tell me how can I add multiple AR model within the same app? Much Appreciated!!
Feel free to checkout this video: czcams.com/video/kDPqB_JxDoc/video.html
Im getting the following:
The type or namespace name 'AR' does not exist in the namespace 'UnityEngine' (are you missing an assembly reference?)
The type or namespace name 'ARTrackedImagesChangedEventArgs' could not be found (are you missing a using directive or an assembly reference?)
The type or namespace name 'ARTrackedImageManager' could not be found (are you missing a using directive or an assembly reference?)
same
You should have explained what you are doing and why as well
@@ankk98 thanks for the feedback :)
Cannot find LTS Release 2021.3.6f1 in Unity Archive. Do you recommend another version? I am using Windows 10 Pro
@@by-pk5wc you can use any of the latest Unity LTS version
@@immersiveinsiders Thank you!
I get the following error: Assets\PrefabCreator.cs(19,31): error CS1061: 'ARTrackedImageManager' does not contain a definition for 'trackedImageChanged' and no accessible extension method 'trackedImageChanged' accepting a first argument of type 'ARTrackedImageManager' could be found (are you missing a using directive or an assembly reference?)
Hey I'm not getting add module option for 2021.3.6 version. Please help
Are you using the Unity Hub for adding modules?
How did you install the Editor? Separately or from Unity Hub?
I would recommend you try and install the Editor from Unity Hub
Very nice video btw. I just wish the video was less rushed, slower, taking more time to explain.
Hey, this video was meant to get people started with AR. We have a detailed and slower version for ARFoundation, which you can check out here: czcams.com/play/PL4g4CxkYXn3sjtFTSEW0uGv8J9QLsEWm8.html
thank you bro
Good evening sir the last part of the code when i try to build n run in my phone it is showing error in code and how to scan the image can u please let me knw soon theafter tomorrow i have project review
@@MukeshKumar-ct2py what’s the error your are seeing?
*Hey man. GREAT JOB*... I am using 2023.2.19f1. The only problem that i am facing is that controller doesn't work. Dragon appeared on image target but it is stacked on it. Just Take of and not going anywhere while i am moving the joystick. Any idea please?
Nope not really sure why that could be happening.
Did you ret using Android logcat to see if there are any errors?
Thanks =)
How do you go to image tracking immediately after giving build and run
The app will automatically open on your phone and request the camera permission. Once you grant the access you can start with the image tracking.
When I run the application on my phone, it says I need to update Google Play services, but when I try to update it, it gives the error that it is not suitable for the phone. I tried it on 2 phones, it gives the same error on both of them. Is this error related to phones or can I fix it from Unity?
this error related to phones
@@swatiraykar2563 :(
we can run this project on any smartphone or we need any specs for the project
Here’s a list of supported devices: developers.google.com/ar/devices#google_play_devices
I am using a MAC Book and I am unable to connect my android phone to the macbook and it is not appearing in the devices.. what can I do?
I am not sure how to fix that since I don't use MAC, however, google suggests that you need to have Android Studio downloaded. Maybe you can check out more on that.
My mobile is not recognising the image. Can I change the image
Is your phone compatible with AR? Here's a list: developers.google.com/ar/devices#google_play_devices
Yes its compatible with AR (Galaxy S20 FE) it is in the list. The joystic is visible camera is able to view the surroundings but when I focus towards the image , there is no response. I am very happy to get immediate reply. @@immersiveinsiders
Even I increased the reslution to 300 in photoshop. @@immersiveinsiders
Same problem bro
can you give the script as a folder or something like that
Hey, it's available on our Discord channel: discord.gg/uGbGnUtu
I recently completed this project but the dragon started flying without scanning the image
Maybe you left the dragon prefab in your scene?
Hey man,
Is it possible to deploy the game on webgl with some modification on the script? Or it will affect the performance of the game?
Haven’t tried doing that, so I can’t really tell.
@@immersiveinsiders alright, thanks man really appreciated. You are doing a great job, will be waiting for some more videos on AR may be with character/ animation this time 😃
how to check the output
which app needed to be installed
You need to build this application on your android device.
Hello man thanks for such a lovely tutorial. I wanted to know if you could guide me to add other models with different images to add to the project for experimenting with sound
Yes, we are working on updated AR Foundation videos, it will be out soon
I was wondering about the same thing, can i have multiple prefabs with different images in the same app??
Hey, my camera is not recognising the image, my device is compatible with AR
What's the error you are facing?
HI, thanks for the amazing video! I'm wondering if this is also available for iOS. It seems like I need to modify the 'Build settings' step and then select 'iOS'. Right?
Yes! but then you'll be able to build it to iOS only if you have a mac.
How to fix complie errors pls tell me I'm not able to enter play mode
You can use Play Mode for AR applications unless you are using the XR simulator
Hi, when we use Amazon shopping app or any other app which provide "AR view" feature, we place our phone's camera on the floor and click on the image from the app. In the next step, a augmented object is created and appear on the screen. Is there any role of the phone on creating this augmented experience or it just the App server which creates the augmented effect and just sends to the app? Could you give any idea on this. Please reply, I need this for my college project.
What they are using is something called WebXR and embedded that in their app. So to answer the model is coming from the server but it uses your phone’s sensor and computing augment.
@@immersiveinsiders thanks
can we use Oculus Quest 2 for ar development
Yes you can, but Plane detection is only feature you can use
@@immersiveinsiders so can you suggest me a budget AR handset for beginner
@@vishaldewangan9393 right now there is no budget AR headset. All are quite expensive. The best right now would be Quest 2/ Quest 3 and development for mixed reality.
image is not tracked what can i do ?
Are you using the same image as mine?
What about the apple
You can use the same code logic but you need to use ARKit plugin instead of AR Core and use XCode for scripting
Hi bro, in my unity I only have XR Origin, there is no AR session origin, are the two the same? After I tried using XR Origin and extracted it to .apk, the display only turned black and all that was visible was the joystick.
please help
Yes, they are the same. Maybe you have not enabled AR Core in the XR Plugin Manager. Can you check that?
@@immersiveinsidersis that google AR Core na?
I'm developing for the first tike, and ar session origin is not available should I download 2021 version it will show?
@@devv000 Yes it is!
@@devv000 It's now updated to XR Origin. The rest of it remains the same.You can refer to the latest video for setup here: czcams.com/video/yfyEAhl8mSQ/video.html
Could you explain a little more about the code part? For example, wich extensions are you using?
What exactly do you mean by extension? can you point out the time of the video you are referring to?
@@immersiveinsiders i dont know anything about code and was very confused with the color coding and like the little popus u had everytime u typed and mine wasn't so i just copied everything letter by letter
@@ayushsinha1376 that's because the preferred editor is not set. Click on Edit -> Preferences -> External Tools -> Select Visual Studio as the External Script editor.
I'm planning to create this for my college tech fest. I want to add a model feature like we have a record 360 view of a person from our phone then their 3d model will generated and then we can control them through joystick. Can you help me in this
What you want to do is possible but it's complex. You'll not be able to create a person's 3D model from a 360 video. There are some software you can use like Luma but not all phones are supported.
After you get the 3D model you need to rig them manually using Blender. Then you can import it into unity.
Use Mixamo animation, add it to the 3D model, and then finally you'll be able to control it.
@@immersiveinsidersoh thanks for the information. For now this dragon ar is very big achievement for me if i created it successfully 😅
I have a mini-application where the car drives on the roads.. Just in the application, the car drives perfectly. But I tried to make an AR application using Vuforia. The car turns the wheels, they turn if you press W/S. But the car doesn't drive
Haven't tired much of Vuforia actually, so I am not sure about the fix.
great video but I need help, for an hour i was confused why dragon is not showing up on scanning the photo but than i realise it deployed but in a very small size and the offset is way too much from the image as i want the summoning of the dragon just above on the image but it is not happening as considering {the offset is -0.01 still it is summoning far away from image and is there any way we can test our AR in unity itself as it is difficult ot test it on phone everytime , like emvironment where we can test our AR app in unity can you make video on this and why my dragon spawn is offset from image can you please answer this in the comment .Thank you
Hey, if you follow the video correctly it will work, I would recommend you do double check it.
To test the scene without building you can use the simulator: docs.unity3d.com/Packages/com.unity.xr.arfoundation@5.1/manual/xr-simulation/simulation-getting-started.html
Bro i developed the app and deployed it on my mobile but it asked me to install google play service for ar but in Play Store it ahows this version is not compatible for your device. Then how will i test my app?
You'll need a phone that's compatible with AR code. Here's a list of devices: developers.google.com/ar/devices#google_play_devices
help me, unity throws me this error "UnityEditor.BuildPlayerWindow+BuildMethodException: 4 errors
at UnityEditor.BuildPlayerWindow+DefaultBuildMethods.BuildPlayer (UnityEditor.BuildPlayerOptions options) [0x002da] in :0
at UnityEditor.BuildPlayerWindow.CallBuildMethods (System.Boolean askForBuildLocation, UnityEditor.BuildOptions defaultBuildOptions) [0x00080] in :0
UnityEngine.GUIUtility:ProcessEvent (int,intptr,bool&)"
same error please help this
Hello and thank you for this wonderful video. I really enjoyed following your instructions and was able to build everything as you said however, I’m at the part with an iPhone and I’m confused I’m gonna hit building and run but I don’t know whats gonna happen, we’ll see. I was hoping that you had something about IPhone setup somewhere. Have a great day tho much respect I am going to subscribe to your page.
Hi, the setup for iPhone is slightly different, instead of AR Core you need to check ARKit. Also, you need a Mac to build it to iso, you cannot use a Windows pc.
Hey I need to add 3 dragons how to do that. Thank you
Add two more images and repeat the process, however it might get compilated as to which dragon you want to control with the joystick.
Good evening, congratulations on the video, I'm starting with AR, I would like to know if there's a way to add a button that makes the dragon release a fireball?
Yeah, it's possible. You need to have a fireball effect in place. Add a UI button and use the 'OnClick' property from the button component to play the effect.
after following this tutorial i keep getting a gradle error. It wont let me build the apk. Ive searched everywhere for a fix, and made my own keystore but it is unable to be installed on my phone, the apk. Im confused because my other AR project work normally and i have no issue in building the apk. But this one in particular keeps giving me building apk error related to gradle
What exactly does the error say? "Building gradle failed?"
can you please share AR VR internship oportunities
my screen is black when iam running the app except dragon?
Have you made sure that you are using AR core plugin from the XR plugin management? Also which render pipeline are you using?
Hello thx for your videos!but why are you able to click “android “ and I can’t? 3:22
Make sure that you have added the Android build support module to your editor :)
Im getting a black screen on the part where the dragon should be flying
Are you using URP or 3D render pipeline?
There is no controller showing on my mobile screen 😢
Hmm, if you follow the same procedure you should be able to see the controller.
it is unable to build and run these are the errors BuildDatabase FailedException: arcoreimg failed with exit code 1 and stderr:
WARNING: Logging before InitGoogleLogging() is written to STDERR
!
[18:22:40] Error building Player: BuildDatabaseFailedException: arcoreimg failed with exit code 1 and stderr:
WARNING: Logging before InitGoogleLogging() is written to STDERR
!
[18:22:40] Build completed with a result of 'Failed' in 0 seconds (293 ms)
2 errors
Maybe you are using a different image or the same one?
same error
@@anirudhsaxena6826 are you using the same image?
too complex tuto need just start an Ar session on webgl
Why my camera did not open while running the app? can you help me out?
Can you make sure you phone supports AR?
developers.google.com/ar/devices#google_play_devices
@@immersiveinsiders Vivo iQOO 8 Pro is not mention in the list, sir
do i need to find a phone that support Depth API ???
How to clear compiler errors??
What are the errors you are getting?
I am getting compiler errors
why do i get a code error, (Assets\PrefabCreator.cs(9,24): error CS8124: Tuple must contain at least two elements) help me
It's hard to tell what's wrong without having a look at the script. Maybe you can join our discord server and share your code there.
discord.gg/n45XBeaf
Hey I am having some error with my code, can we get in touch to figure out what is wrong, Great video by the way!!! Very helpful.
Hey! Feel free to join our discord community and post your question in the #ar discussion group.
discord.gg/JKe9FsPp
hello! I'm loving this video so far but I'm a bit hung up on the coding bit. Can I please get a fresh Discord link please? : ]
@@immersiveinsiders
Hey! I need help with the part after the script writing. After script loading I do not get the option of dragon prefab or offset. Can someone please help me with how i can fix it, its urgent.
You might have some errors, double check the script.
Is this a marker-based AR App?
Yes it is! the image itself is the marker.
I followed the tutorial step by step but the jpystick is not working, its doesnt move the dragon or the slider of the joystick
do you encountered any error during build and run
i@@pranavkataria6246 idk him, but i did. i wasnt able to import all of the joystic applications after download
Please make more such tutorials
Hi I am new to AR & VR concept. I have a built a vr project using frames. Can you provide any roadmap to learn ar or to learn unity
AR is relatively easier to learn when compared to VR. You can start by understand how Unity works and basic C# programming. Then you can learn about AR Foundation and AR core which are supported on android devices. And with all these knowledge you'll be able to make an AR application.
bro thanks for the tutorial but when i build and run the app it only shown black screen on my phone but the controller are working
Maybe you have not enabled AR Core in the XR Plugin Manager. Can you check that?
@@immersiveinsiders i enabled it but after that it is unable to build and run these are the errors BuildDatabase FailedException: arcoreimg failed with exit code 1 and stderr:
WARNING: Logging before InitGoogleLogging() is written to STDERR
!
[18:22:40] Error building Player: BuildDatabaseFailedException: arcoreimg failed with exit code 1 and stderr:
WARNING: Logging before InitGoogleLogging() is written to STDERR
!
[18:22:40] Build completed with a result of 'Failed' in 0 seconds (293 ms)
2 errors
What should I do in 4:10-4:11 minute? Deleted a main camera or something?
Yes that’s right! We need to add XR origin
@@immersiveinsidersand how about to change joystick to gesture?
What do you mean? Something like hand detection?
ARcore XR Plugin is being enabled and XR plugin Management is also being enabled but after I press on bulit and run its just showing me a blank screen on my mobile and Im not able to scan the image...I have double checked that ARCore XR Plugin is enabled . Could you please help to resolve my problem....and I even want to know how to scan the image, I mean can we forward the image file to others and open it then will we be able to scan the image
Are you using 3D RP or URP project?
3D
There’s only way you can debug you app. Follow the steps mentioned in this video and see if the console prints any error.
czcams.com/video/XC8paPOn268/video.htmlsi=enfhIeXRcur-UBG9&t=264
@@immersiveinsiders ok sir . Thank you
@@alishaanjum132 did you solve that??pls reply
Can you please tell me about the scanning the image. shall I take print out
That's not required, you can use your screen for testing.
can you make a youtube ar, like apple vision pro has
Hey, can you explain a bit more? or send a reference link?
after doing everything when i click build and run i am getting errors in my console, got no clue how to fix it
What’s the error message?
@@immersiveinsiders initially i had problem with ndk which i installed by downloading from android studio after that when i click build and run it gives me error saying " A failure occurred while executing com.android.build.gradle.internal.tasks.Workers$ActionFacade see console" something related to gradle error. Is there anyway for me to send u a ss of my console. Thank you so much for responding .
@@vishal428 Bruh Literally the same error, I have been trying to solve, searched many places and now after frustration I just turned off the laptop.
@@JohnEbin lmao me too I tried with 2 diff unity version still same problem. Video is of 17mins but it took 2days of insanity from me
@@JohnEbin Hey, so I have created a base repo, use this and let me know it it works :) github.com/immersive-insiders/AR_BaseProject
It really helped me a lot. thank you!!
Cool..Nice video
Thank you :)
very cool
hey can upload all file this project
cool
great guy
guys, help me, have some errors!
my app got downloaded on the phone but its all black screen except the dragon
It could be because you have not enabled the AR Core plugin, can you make sure you have enabled it in the XR Plugin Management tab?
hey i have an issue here is that when i open the app from my android, camera isnt working yet i can see the text box i inserted in my project
Have you made sure to enable the Google AR Core plugin in the XR Plugin Management settings?
@@immersiveinsiders i did, now the camera works and everything is visible when scanning the image i want, but the thing is now i can’t press the buttons, whenever i press them they don’t work
@@immersiveinsiders Where Can i find this?
What exactly do you do after 'Build and Run'? It didn't work for me, although my phone was connected Unity failed to recognise it. How do you access the app after you've built it, does it appear on your phone as an app?
Hey! 1st you need to make sure you have the developer mode enabled on your phone. Then make sure Unity recognises it, then you can build and run. That will creat an APK file on your PC as per the location you had chosen and it’ll also create an app on your phone. Yes, it’ll appear as in app on your smartphone!
Can u please share this file?
You can download all the scripts and references from our Discord server: discord.gg/yfxGUb4M
@@immersiveinsiders link is expired
@@parashervankani8210 try this: discord.gg/35GCNbW3j9
@@immersiveinsiders bruhh this one is also showing expired can u give zip file? Or check your discord settings
@@parashervankani8210 The link is working perfectly fine :)
If it does now work, the best would be to follow along with the code.
help me, unity throws me this error "CommandInvokationFailure: Gradle build failed. "
Seems like you haven't set up the external tools correctly. Or the version might be different.
Check out the "Guide for downloading and assigning Dev Kits" section of this blog but install the latest versions.
immersive-insiders.com/blog/set-up-your-ar-app-for-the-google-play-store
Hey, do you have any idea why i would be getting "ArgumentException: Getting control 1's position in a group with only 1 controls when doing repaint" error?
the error disappeared for me when i saved the build on my pc
and I didn't press build and run
Not sure why you got that error. Did you do it in the same way as told in this tutorial?
Js language you used for code ?
It's C#