R154 Tail Housing Removal and Installation Tips from Driftmotion.com
Vložit
- čas přidán 16. 04. 2022
- At Driftmotion.com we offer brand new R154 transmissions, along with upgraded billet shifter housings in 4 different lengths. We also do shifter extensions on MK3 Supra type stock shifter housings for R154 and W58. These upgrades require removing the tail housing for installation, so we wanted to do a basic tail housing removal and installation walkthrough, and talk about some things to look out for.
www.driftmotion.com/New-R154-...
Thank you sooooooooo much!
Help!!
What do you do when you forget to take the ball bearing thats next to the Long bolt Out??
Now its stuck in gear, and i cant get it to loosen.
The ball did not fall in the transmission. But it did push a rod down, when installing the rear housing i think.
This is a mk3 supra non tripod version
@mk3driftmotion
I got the same issue some insight on how to fix it would be nice
Does anyone know where I can buy an extension/tail housing whole ?
One of my shift rails don’t allin as you mention in the video before putting it all back I believe it’s the reverse it’s the third one closes to you I have tried pulling it down then up I have the older r154 any suggestions or causes ? And can I just install it like that it aligns up just not perfectly a small little gap
Sounds like maybe the detent ball/spring is missing that keeps it in place? All 3 rails should kind of snap into position. Take the tail housing off, and individually move each rail front to back, one at a time. If they will each not move in both directions, the shift lever selector will not be able to move it either.
so my shift lever on the older r154 doesn’t look like that. any chance i could dm or email you guys on some guidance on how to re-install the tail housing?
Ok call me at the shop 9099490459 ext 2
I just need to weld my tail housing would you recommend just removing tail housing from transmission ? While still bolted on
Yes I would definitely remove it and clean it thoroughly first. It's going to get hot enough to burn the oil on the inside of the case, and it's going to make a smelly mess. The last thing you want is oil on fire inside of your transmission.
Yeah okay would you recommended if I just remove the tail housing alone without removing the whole transmission like just unbolting the tail housing while still on the car ?
What RTV are you using to seal transmission? Can't find tb1281 nowhere
Permatex Ultra Grey works very well, and its available at any auto parts store.
Just bought TB1207B, will see how it work@@mk3driftmotion
You can swap those tailhousings correct?
No the tripod tail housing does not swap onto the older transmissions,, they are internally different.
@@mk3driftmotion would you have a recommendation on how to move the shifter location of a tripod transmission to that of an earlier version of the r154 or should I just throw it in the scrap bin?
@@turnloosecollective yes we offer billet housings and arms that convert the tripod trans to 4 different shifter positions with an MK3 Supra style shift lever. www.driftmotion.com/DM-Tripod-JDM-R154-Billet-Shifter-Housing-Arm-p/dm3522.htm
@@mk3driftmotion in the mail! Thank you!