MikroTik Tutorial 20 - How to setup a simple point to point PTP network link
Vložit
- čas přidán 24. 04. 2017
- Learn MikroTik RouterOs Tutorial Series (english)
In this tutorial, I will show you how to configure a simple Point to Point PTP Wireless network.
You will need any one of these Mikrotik routerboard router for this tutorial:
Mikrotik RouterBoard RB951Ui-2nD hAP
Mikrotik RB3011UIAS-RM
Mikrotik Routerboard RB2011UiAS-2HnD-IN
Mikrotik RB750Gr2
Mikrotik hEX RB750Gr3
MikroTik RB2011iLS-IN
MikroTik Cloud Router CRS109-8G-1S-2HnD-IN
hAP lite
hAP
hAP ac lite tower
hAP ac
mAP lite
mAP
wAP
RB951Ui-2HnD
RB951G-2HnD
RB2011UiAS-2HnD-IN
Mikrotik RB941-2nD-TC - Věda a technologie
So many videos claim to be setup videos and turn out to be unboxing videos. THANK YOU for being true to your title and your viewers!
This video was super helpful, thank you! Mikrotik devices are immensely versatile.
this video came at the right time, awesome job dude
This was incredibly helpful, thank you tons for being so concise on this
Your are welcome
Great job with the film ! :) Thank You!
Thank you for all of your videos man. They are awesome. I was wondering ir you could do one on how to mesh several Mikrotik metal series AP's? And also how to do PTMP on Mikrotik sector antenas. Thank you for your time!! By the way, where can i donate some money so you could keep up these great tutorials?
Nice tutorials :D,tnx for all
Good one. Thanks!
Hi, thanks for all your great videos. One topic that I'm missing is a Mikrotik LAN using RB's. I have an RB941 and RB931 and I want to use both as hotspots and for wired connections. I want to connect the two RB's via ethernet (same physical building). I'm just not getting any joy using e.g. RB941 port 2 and RB931 port 1. The RB941 is connected to my ISP.
Good one! The video was resourceful
Your videos are great tool for me. I have a question how do i connect mikrotik to a dsl router? Do I set it as a bridge or leave it as a router. Am using a Crs
Hello, I am new to the mikrotik world but with your video's I have been able to setup my wireless network and put a bandwidth limit in place...thank you so much for the awesome video's. I have a RB951Ui-2HnD, if I get a second one can I use it to make a "mesh" network in my house? is PTP the same thing? any guidance would be greatly appreciated
Hello, thank you for your videos, they have helped me a lot. I am a beginner with Mikrotik networking and would appreciate assistance with setting up repeaters for a property I have that I use for Student Accommodation. The property is quite large and therefore the one RB cannot accommodate the other areas for students to access the Wifi. Just wanted to find out how I can extend the range of the signal, which hardware do I need to purchase and how to setup it up also to enable the Hotspot functionality so that each student can access the internet using a pre-allocated username and passoword.
great video,, need to do point to multi point video as well thanks!!
You are welcome, soon.
Bro your videos is great, help me a lot.
I have question for you I am stack at one situation and do not know how to solve, can you help me?
Will it also work if I make the one radio Station Bridge and the other one Station?
Thanks so much l have been struggling to get this at last you have come to my rescue
This was nice a straight forward
Thank you for this, I just wanted to ask, I will be using SXT 5 lite for PTP between two locations 1.2km far, will this work ? And using this method, will I be able to share the internet connection from location A to location B ? I have a mikrotik router in location B, do I need to put the gateway IP the same as the router in location A so it routes the traffic to internet from there?
How could you convert this Layer 2 bridge into a layer 3 connection thus cutting broadcast traffic?
Thanks for the information
Your videos are excellent, thanks a lot. Can you please help me with the point to multipoint configuration
I want to create mesh wifi, but I don't think I should use repeater. I think about bridging the access point but then I arrive with ton of questions, Can I manage users from bridge access point with mikrotik? Will the users get seamless connection so they don't have to connect again on nearest access point? I really want to create much more wider wifi area, but because I haven't tried it yet, I didn't know the answer.
i watched your all videos,, i'm interested to learn,, as a beginner what model of mikrotik router i will buy,,, thanks n advance...
Hi, is it possible to configure hotspot configuration and us it on a wifi range extender?
thank u I´m following your videos and they are verey usefulle
but Nv2 use for ptmp not ptp it has tdma and increase latncy it's better to use nistrem
ap bridge also use for ptmp use bridge for ptp
Is this a layer 2 bridge? If so how can one configure a layer 3 connection?
Greatwork sir. . For example pppoe server and client setup. .how to access LAN on pppoe client sir? Thanks
What if this go over cambium ptp radio links? What's the set-up going to look like?
What about frequency scanning and setting up ip and so on?
Hello,
Thanks for the video and awesome content,
Need to ask you one question,
Can we create PTMP using nv2 mode? So we create AP as you did, and than 2 x station devices connected to AP. Will that work faster than usual 802.11 mode?
Thank you :)
Hi very insightful video, Thanks.
I would like to know how to access wireless internet on my PTP link
The PTP connecting cannot be used for regular wifi internet access because it is using a different protocol NV2.
thankssss
great video !
can you make another video for advanced configuration and what other stuff to do to enhance the ccq/signal and other things
CCQ has to do with the quality of the signal. The are so many things that affect your CCQ like:
signal strength
interference
# of clients
type of antenna
Fixing these will definitely improve your CCQ
yes i understand all of that but what i meant about advanced config is the protocols which one to use and when i'm currently using nv2 nstreme to all the links i've worked on
it's seems fine most of the time and sometimes not, like ccq drops and changing the frequency won't cut it and even the MCS all of those configurations there no praticular explaining of them on nearly all the internet all what people do is depending on expermenting with them but no one actually knows what they are for or what they really do
Hassun Hany Based on my experience signal strength & interference significantly affects CCQ especially on 2.4GHz.
i'm talking about mikrotik 912 it has a big range of frequncies till 6100
Can i use Groove 52Hpn for point to Point?
Hi there, I'm trying to make a point to point with cpe 510 and mikrotik RBLHG-5nD(MIPSBE). Can anyone point me in the correct direction. I was googling a lot for these two for point to point connection. No Luck. CPE510 has internet connection and I have to use mikrotik as station bridge.
Nice job, thank You for all Your working about Router OS I am interest to learn and watch videos
I am need your opinion and help about design security system cameras if You can help Me please
What exactly do you need know.
thanks for the tutorial!! great job, i do with your video the same with a Wap AC, have 2 wlan in one are the PTP in 5Ghz and the other wifi with router wifi in 2.4 Ghz thanks
You are welcome
Hello I have already setup p2p connections on fiber optic and i want to increase only data transfers speed if any help to me
Is there a possibility to make a PTP with groove 52ac without ApBridge mode? Because I have sl3
yes
how to set limit bandwith to p2p location b?
Check out these videos:
czcams.com/video/RK-1mRgTEPg/video.html
nice tutorial, am using Mikrotik RouterOs 6.45.3 and I can't get the wireless settings. any help, please
Please Make Tutorial On Mikrotik Hotspot With Radius Server ...
Let me answer your question sir.
First, after you made hotspot on mikrotik (IP > Hotspot) then click (Server Profile > and check on RADIUS) It's done.
Now, go to Radius (from main menu), create new Radius Server and then click on "Incoming" and check on Enable. Okay radius is done.
Now, You can open your user manager (192.168.88.1./userman) by default.
Remember if you connect through hotspot, you should disable you hotspot first (IP > Hotspot, choose server bar, and right click on your hotspot and disable it.) after that you can connect to your user manager just fine.
User manager is default user management from mikrotik, it connect to radius server. With user manager you can manage more than 1 hotspot. You also can use 3rd party software than userman.
I hope this will help a bit.
I almost forgot, when you make new radius server you should insert "secret code" this will be used to connect from user manager to radius server.
If it really difficult maybe you should look for tutorial videos, I don't have them because I don't make youtube channel. :D
but how do you configure ptmp?
Can u make point to multipoint set up?
Noted
I look forward to this as well.
Can you video on set up pptp client vpn
Noted
please make one open vpn video server and client router to router and windows client and mobile
Very very very basic only work in lab not n real world
I want p2p 20km
I noticed something really strange with this video, for some reason I cannot understand your voice when I speed this video up to faster than 1.25 speed, I can understand people speaking English who are not native speakers, say someone from China speaking English, I could listen to that at 1.75 or 2x speed and yet for some reason I can't with you. 1x speed it is fine. It's so weird. Something with your accent and my ears I guess but when I play you at any speed faster than 1x it just turns in to that 'fast forward' sound, I just can't follow it, I just thought this was strange enough to make the comment. Maybe it wasn't... but eh, who knows, someone might get a kick out of it or have some explanation as to why.
But rambling aside, great video, super helpful, thanks.
Please define clear, starting with winbox
Follow this playlist
czcams.com/video/76nK1LXyPMA/video.html
Poor
Good one! The video was resourceful