Magnetic 3x3 Tutorial
Vložit
- čas přidán 5. 09. 2024
- Follow my Instagram here:
/ garbagecuber
Where you can get these magnets:
www.ebay.com/it...
Link to 10% off CANcube:
i.refs.cc/V5Nj1u7n
Music:
Alan Walker - Spectre [NCS Release]
• Video
Tobu - Infectious [NCS Release]
• Video
I have been looking for a tutorial for so long on where to place magnets in my Valk. Thank you so much!
I can't use my tweezers because they're magnetic... That's irritating
Use plastic tweezers, you can either buy them (they're pretty cheap) or have them 3D printed if you know someone with a 3D printer. Another tip to avoid making a mess is to use a toothpick or a brush to apply the glue, instead of applying it directly from the bottle. Some cyanoacrylate based glues come with a brush, they're very helpful if you're not confortable handling this kind of glue.
Using a brush you can do it using a very small ammount of glue, which may be good if you're not sure you will get it right the first time, or if it will be too clicky/strong or too weak. Using just a little glue you can pry it if you didn't like the magnetic feel and glue some other place to adjust it. Near the core it feels weaker and less intrusive, and farther away it feels stronger and more clicky. After you're sure it's the way you like, it's a good idea to put a little more glue, as it may become loose if you drop the cube on the floor or slam it on the table during timed practice.
@@gcolombelli Thanks for the tips :)
@@gcolombelli Great tips man!
@@gcolombelli thx!
@@gcolombelli thanks
So a useful thing to do is, put all the white pieces together(pieces with white on) and also keep the corners and edges a little bit of from each other so they don't mix.
Sweet video!
Thanks!
You are garbage 🙂
What happens when you don'look where you typing
@@shiny_446 hoooooo boi
That's a little mean, dude
@@Theoquertz r/whooosh
awesome tutorial, this really helped me magnetize my valk!
This video was super helpful. Thank you for making such a great tutorial!
welcome back to this video because i replied after 6 years
Nice tutorial! I might do this with a cube of my own!
I am doing that right no hehe
Same pfp
Wow you deserve way more than 600+ subs.
1000 now almost
Now 2.5k
I might do this when i get my mf3rs2 (i know the mf3rs3 is available for pre-order but i average like 35 or 40 seconds so i dont need the newest one)
You should get the mf3rs3 still. I got 25.67 average on it.
@@funnibird J Perm rates the rs2 above the rs3 in his tier list video. Have you tried them both?
@@SoundToxin no but might try the rs2 because I can already see big improvement with the rs3
@@SoundToxin If you have an Agrresive turning style, then go for a slower cube (like the rs2)
I have the mf3rs2 it is good lubed and tensioned properly I might magnetise it depends if I can magnets
"whats up guys, garbage cuber here" just sounds so funny
This video is so helpful :) I hope I win the gts 2. Love your vids!
Thanks!
Congrats u won!!
0:52 The kragle!
Wow very helpful video! Thanks a lot!
is it ok to use a moyu stickerless cube for magnetizing?
ZEEZADRE RODRIGUEZ yes
Yes stickered and stickerless
Glitch- ZHYDRA yes
Why nôt?
Poopies
Sounds like BrodyTheCuber a little bit. Who aggress?
Yes I kind of agrie
I agreies 2
Wow I angrees to
I angorie also
I agreser
best magnetize tutorial in youtube.
I miss the old intros like these
Should’ve mentioned that if the cubes have magnet slots in the pieces like the Yuexiao Pro, you don’t need to glue them up in. Just have to get the polarities right. :]
Garbage rules the world !!! Another video well done. Very informative as well as interesting !
Wow. Your quality is justt getting better
those magnets are the exact magnets i got a few months ago. crazy
The background blur made my eyes fuzzy
Nice video! I saw your channel yesterday and i love it! keep up with the good work.
2:51 corner stock
Thanks man!
How do i desemble tang long
Great video! I use a different magnetising method but this might be more efficient! I'll be sure to try this out the next time!
I might just buy the gts v2 and then buy the magnets just like you. Great video btw loved it!!!!
Do you think it is possible to magnetize a cube by magnetizing edges and centers, without magnetizing corners ?
Can do this at other local brand also?
Thanks bro ❤ ur soooooooooooo much helpful
Yes bro
Ur right
Oh that intro!
omg this was so helpful thanks
Thx it worked for my speed cube
Wow thats a lot easier than I thought. I was thinking that is was gonna be witchcraft
I’m gonna guess there are 2 magnets per edge and 3 magnets per corner right?
Thanks man, very nice video.
I was just wondering how do you make sure you are using the correct side of the magnet. Cause when you are turning two same poles may encounter and push each other.
How do you handle that part ?
Thanks again.
I wondered the same thing.
Heres a good video that will prevent wrong polarizing.
.
czcams.com/video/-IfoPiccvqA/video.html
Thanks for the magnets link and great video!
Great video now I need to try this
Onion Cuber same
please please send me the link of magnets
The valk corners are crazy complicated, what's the point?
My super glue drys in like 10 seconds
Super glue gel takes longer to dry if you need.
Will 4×1.5mm size will work
Nice video I hope to get one of those amazing cubes
How many magnets do you need for 1 rubiks cube
what do i do when i cant open the edge piece i have done it for all edge except 1
Do you need 2 magnets in a edge piece
Yes, one in each half
Ive tried to magnetize a valk but all the magnets fell out :(
I would suggest using a stronger glue
Cyn Your Just An idiot
Will this work for nonmagnetic cubes
Nice tutorial!!
Thank you so much for this tutorial!! ive always wantsd to know how to put in magnetss!!
Your welcome! Glad you liked the video :)
Great video!
I thought he broke his valk corner
Very helpful video. Thank you very much.
but gts2 doesnt open like that. it has caps and it doesnt need disassembly we can just remove the cap
Might do this in my meilong 3c
how many magnets i will need to magnetise
great video man
Dat name though
How many magnet do i need for my Rubik's cube??
How many magnets do we need to do this? Can we just do the corners only? or Must do the middle edges too?
I saw someone magentize a Gan R, but they did something wrong, and the magnets didnt match up. In the comments, everyone said that he had the polarity wrong. How do i make sure this doesn't happen?
If you follow this tutorial i sure it wont get wrong polarity
Because i try it and it works!
So each piece will require 2 magnets? Confuse.
I want to do this to my qiyi cube. It over shoots allot and other pieces move when they're not supposed to.
How do I assemble the corner pieces its confusing to which color you should pair with
Hey, thanks for the boost of confidence to do this. I took a free Yuxin Black Kirin and made it feel more like the Little Magic M. Then I magnetized a Dayan Zhanchi, my first speed cube ever, and took 8 years of its age (doubled the edge magnets for that one). Very pleased with the results and would do it again.
How much of magnates do we want
How many magnet do you need for this
How many magnets do you need to use?
Do we need the same cube as you
how can I remove from the plastic by dont damage the plastic ???
inside both the edge and corner pieces of the gts2, there are little slots, and i just checked on my cube and they line up perfectly, aren’t those where you’re supposed to put the magnets??
Nice video!
I did this on my Valk. Now I use a GTS3 M!
Why
@@gisketch it was a joke about messing it up and running my cube and just buying a new premagnetised one
the ribs will have one polarity?
Can you remove gluedagnets from a piece though?
can you use hot glue on putting the magnets or shoes glue?
Can you magnetize the mei long 3c?
How much magnets is required?
Can you use hot glue to fasten the pieces?
@GarbageCuber
I'm gonna buy magnets and I wanna buy N38's, do you recommend it?
name really depends on what you like better if you like lower magnetic then go ahead but stronger magnets are usually more popular
maybe you can try this with a 2 by 2
Hello, @garbage cuber or someone,does 5mm x 1mm works?
Can i use toy magnets?
How many magnets go on the corner pieces?
Were should you put the magnets for it to have the strongest feel?
Which is the best magnets for ylm m
Whos better between magnet n42 or n50
Could this work for the GAN 356 R? I want to magnetize mine.
How many magnet do u need for this set up?
48
i used 4x2 N35
Will it work with any speed cube?
Really helpful
I messed up Joining Edge pieces I need help... Please help... Can someone give orientation
I'm your 1000th sub!!!!!!!!!!!!!!!!!
Nice!
How do u remove magnets from a cube
You just break the superglue using like a pair of pliers but carefully
How strong r those magnets?
N50 5mm x 1.5mm are good madnets???
i'm going to do this on my gan 356 rs
What magnet did you use for your gan 356 rs?
@@gervinlim9339 di you know geomag right? Well I disassembled the geomags and put the magnets in my cube, they are really strong so if you like weak magnets DON'T do this, buy the cubicle sets, anyway whit some breaking in and some weird German lube from the 80s' I managed to have a really smooth and stable cube.
great video!