Nice job! I have the avenge x and the avenger bullpup. I took the bullpup apart to polish the bolt, the probe and the inside of the breach where they slide. It made it very very smooth, but that plastic cover is an absolute pain to remove from the breach/receiver block.
Thanks KVR, I'm glad you like the video. I never did get to experience the satisfaction and the joy of removing the plastic cover as you have done.😆 I will probably take this rifle apart one more time for a barrel mod, maybe even polish the bolt and breach as you suggest. Take care, and thanks again.
Great work man! I've got a heavily modified Avenger very similar to yours. It's a lot of fun doing these upgrades and making it your own. Bravo brother!😊
I bought a 22cal avenger in 2020 & spent money on a bottle conversion kit & a plenum. For one reason, to shoot slugs. Can't get it to shoot slugs to save my life. Tried everything from 17.5 to 26 grn slugs shoots them up to 960 fps but they don't group. I gave up & just shoot 25 grn jsb pellets.
AVA barrels are 22.75" and heavily choked, they have a lighter, "running choke" through the entire bore. For slugs, can I suggest taking 2.00" off the muzzle end. Removing the heavy section (cut and crown) leaving a 20.75" total barrel length. BPOI
Nice gun an mods dude . I just got the avenger 25 cal with the green laminate stock , really like it so far . Kind of wish i had just went the cheap route an got the regular stock then modded it with the buck rail tactical stock setup . But anyways , as you know you can dump alot of money in a hurry on this hobby . lol
Glad you like it TG. Yeah, you could've went many directions on yours, the green laminate is a nice choice, a solid base for the action and barrel. All are good choices. Thanks
Hello BB, I haven't completed a total shot count from 4300psi down. It's a 500cc bottle, from 3500psi down to 3000 I had a count of 50. I'm confident the count would be over 100.
The stock valve spring is 1.0" in length, .38" OD, .265 ID, and wire diameter is .054". I'm pretty sure I used a .031" wire dia. spring, with the other dimensions being close to original. I searched amzn to find a kit with the closest measurements. If you have it disassembled, check to see if you can use a spring with an ID smaller than .265, then you will have many options. Try the Keadic kits.
Hello KK, I won't count the Donnyfl moderator because I can use it for other air guns. All in all probably 900 U$ over a 4yr period. I could've done without many of the upgrades and still had a gem. Really only the Donnyfl barrel centering adaptor, moderator, regulator upgrade, and scope are essential.
hummm... so much money, time and study invested on that projet when you can easly get one much less expensive PCP capable to do the same performe...!!! what mathers is the joy that you have taken from all that study. Have fun 😉
Yeah, look on my channel at the Crosman's. $65.00 guns can turn into $500.00 very easily. But as for the performance, I'd put some of mine up against much more expensive guns and at least come out even. 🙂
Hello TK, I would say it's worth the $50. A good value. I don't like the 3x9 model, will not hold "0". I plan to try the new CVlife "Bearpower" model soon. You won't be disappointed.
This looks better than stock. Very innovative and interesting mods.
Thank you JB, I value your comments and opinion. Appreciate the sub, I will return in kind.
Nice job! I have the avenge x and the avenger bullpup. I took the bullpup apart to polish the bolt, the probe and the inside of the breach where they slide. It made it very very smooth, but that plastic cover is an absolute pain to remove from the breach/receiver block.
Thanks KVR, I'm glad you like the video. I never did get to experience the satisfaction and the joy of removing the plastic cover as you have done.😆 I will probably take this rifle apart one more time for a barrel mod, maybe even polish the bolt and breach as you suggest. Take care, and thanks again.
Great work man! I've got a heavily modified Avenger very similar to yours. It's a lot of fun doing these upgrades and making it your own. Bravo brother!😊
Thanks SG, I'm glad you like it. Wouldn't mind seeing your set up some time.
I bought a 22cal avenger in 2020 & spent money on a bottle conversion kit & a plenum. For one reason, to shoot slugs. Can't get it to shoot slugs to save my life. Tried everything from 17.5 to 26 grn slugs shoots them up to 960 fps but they don't group. I gave up & just shoot 25 grn jsb pellets.
AVA barrels are 22.75" and heavily choked, they have a lighter, "running choke" through the entire bore. For slugs, can I suggest taking 2.00" off the muzzle end. Removing the heavy section (cut and crown) leaving a 20.75" total barrel length. BPOI
Nice work on modification
Thanks.
Awesome!
Thanks IA!
Nice gun an mods dude . I just got the avenger 25 cal with the green laminate stock , really like it so far . Kind of wish i had just went the cheap route an got the regular stock then modded it with the buck rail tactical stock setup . But anyways , as you know you can dump alot of money in a hurry on this hobby . lol
Glad you like it TG. Yeah, you could've went many directions on yours, the green laminate is a nice choice, a solid base for the action and barrel. All are good choices. Thanks
Hi there from South Africa, how is your shot count with the bottle and plenum convertion .
Hello BB, I haven't completed a total shot count from 4300psi down. It's a 500cc bottle, from 3500psi down to 3000 I had a count of 50. I'm confident the count would be over 100.
👉💯👍
Who can we go to buy the gun from and have them do the modification work
Nice build. Sub'd
Thanks OTA, I returned in kind.
Sub'd ...nice job!.
Thank you GW!
I was wondering where youn found the lighter valve spring?
The stock valve spring is 1.0" in length, .38" OD, .265 ID, and wire diameter is .054". I'm pretty sure I used a .031" wire dia. spring, with the other dimensions being close to original. I searched amzn to find a kit with the closest measurements. If you have it disassembled, check to see if you can use a spring with an ID smaller than .265, then you will have many options. Try the Keadic kits.
Wow super nice...how many price please
Hello KK, I won't count the Donnyfl moderator because I can use it for other air guns. All in all probably 900 U$ over a 4yr period. I could've done without many of the upgrades and still had a gem. Really only the Donnyfl barrel centering adaptor, moderator, regulator upgrade, and scope are essential.
India Rupees houmany sir
Hi there again, is it possible for you to send me the power plenum specs , lenth , od , and id , if you dont mind please .
Hey BB, volume 10cc, length 1.30" of which .30" are threads, OD .858", ID UNK, Wall thickness UNK.
hummm... so much money, time and study invested on that projet when you can easly get one much less expensive PCP capable to do the same performe...!!!
what mathers is the joy that you have taken from all that study.
Have fun 😉
Yeah, look on my channel at the Crosman's. $65.00 guns can turn into $500.00 very easily. But as for the performance, I'd put some of mine up against much more expensive guns and at least come out even. 🙂
How good is the cvlife scoope ?😊
Hello TK, I would say it's worth the $50. A good value. I don't like the 3x9 model, will not hold "0". I plan to try the new CVlife "Bearpower" model soon. You won't be disappointed.
What are the foot pounds of energy
25.39 grains @ 915 fps = 47.20 ft/lbs
@@BriceP.O.I. who can I call to see about buying one and the number
Can i get the link for the 90 duro o rings?. Thanks man
a.co/d/fEtmXYN, here you go T.H.