IRONMASTER SMITH MACHINE FULL REVIEW AND DEMONSTRATION
Vložit
- čas přidán 7. 09. 2024
- Ironmaster Affiliate Link: www.ironmaster....
Today I wanted to go over a full review and demonstration of the Ironmaster Smith Machine. This was my choice when looking for a "home gym" that could allow me to do most, if not all of my training from home. This is what I will be using for my bulk and contest prep leading into my national competition. Thank you for watching, DON'T forget to subscribe to my channel and Bryon Sweno's channel (linked below or at the end of the video!)
Ironmaster Affiliate Link: www.ironmaster....
Bryon Sweno's Channel: / @bryonsweno
Can’t wait to get my own!
I just noticed that the lat pull down can also be used from a higher position if you keep the stoppers low. You can probably just sit on a bench with or without the attachment for leg ext to do a lay pull down from a normal height.
Also to someone’s point below. I have used my superbench for 11 years and I am 6’3” and love it. It works well for tall people. The only issue is leg ext which can be fixed by inclining the bench 1 notch or just doing them barefoot(Tall people advice)
Also someone below mentioned about using the Ironmaster in “Every title” of your videos which is a great idea to bring you more subscribers.
I know I would personally like to hear your story on how you got started working out and maybe seeing some pics of you when you were younger.
Also maybe a video from your wife on the struggles of getting back into shape after having kids. I’m planning to have kids next year and that would help my wife and I.
Another video could be how you do workouts when you travel and don’t have access to any weights.
Also a video on how you eat when you don’t have food with you and have to buy food from restaurants.
Keep it up Drew Bishop! I am watching your videos everyday and Each time it makes me want the IM2000 even more
I thought the same, about lat pull down, that you could use the Ironmaster superbench and start from higher position. I am thinking to sell my powertec gym and buy this one 🤔 big decision, because I really like the Powertec Leverage machine 😱
Tomasz Golebiowski What do you think would bring you over the edge to end up getting this instead of your power tech leverage gym?
@@Fitforacting good question, I really like the Powertec Leverage machine but I have limited space in my shed I am struggling to do everything, the Ironmaster 2000 takes less room and I really like Smith machine, plus vertical leg press and you can do normal squats, pull up bar attachment, cable pull down, low row and many more. And the leg attachment on Ironmaster is much better than powertec attachment,, the bench is more stable, the Powertec bench is a bit wobbly, got less available angles to set up. There is a few things that they could do better, they do some improvements every year but still is not perfect. Got some time to decide, will see 😉
Tomasz Golebiowski awesome info. Keep check their site and use the link that Drew Bishop gave us. They have sales every other month it feels like. I’m the same as you in everything you said. I am waiting to fix my garage and have the ultimate IM2000 setup.
I’m even making a video with all the different things you can have in a home gym to give others ideas for workout. Best of luck to you and if you make a video when you get an IM2000, please let me know. I watch this video here at least 1 time a days and have since December when I first discovered @DrewBishops fitness channel
I have this and pretty much the whole Ironmaster eco system. I love my IM 2000 and im equipment. Still have a 24 hour membership. Haven't been in back there in over a year because I use my Ironmaster soo much. Also have the free weight holders and spotters. Very well built equipment!
Great review!
Mark Navarro I love it!
shil
Nice 👍🏾 review Drew! I’m seriously looking into this! Thank you for showing us the different Exercises! On Ironmaster it doesn’t actually showing them put the different steps together. Cool!
I had one years ago. It was a solid machine.
Jack Ridge what happened to yours?
Jack Ridge ?
Awesome set up. Thanks for the review. That equipment looks like it is worth it.
They are an amazing company and I am so inspired by your setup and results. Also I see you can use a free weight bar with the rack. Thank you so much
Thanks for the demostration!
They should warn about having the safety stops engaged at the lowest point. Letting weights fall on them will deform the rails.
Wow, great video guys, keep up the good work!
Just to let you know, you have backwards the barbell attachment the hooks supposed to engage up not down, but it looks amazing, good for you, great equipment.
No, I think it’s right. Look at the website.
Hi,wonderful machine by far,better than all bodysolid and powerline,very easy to work with it,AWESOME MACHINE. 💯
just found this channel off that bryon sweno edit video... nice home gym bro!!!
FitterNomixs thanks, man!
I just realize this song you were playing in the background. It’s DMX and Drew Hill. I love that song. When are you dropping your next video?
Reynaldo Balmes not sure to be honest. Trying to decide what I'm going to do
I’m looking at the Iron Master bench abs debating on getting one.
Works great in all angles. Up to 600lb limit on incline and 1000lb on regular bench. Get the wheels and get the regular bench. It will give you an extra seat height over the pro bench. Many accessories to use with it and I have thrown it in my car to do workout it s at the park. It’s sturdy but not too heavy to move around
My favorite part starts at 3:10. Man I want this a thing so bad
Got mine im2000 yesterday, really good piece of equipment, very solid 👌
I also have the IM2K, and it does have a lot of versatility. I do wish however they would have left the slide rails in chrome, and would have number stamped the holes. It can be a pain to work the adjustments for both sides during a workout for various bench press movements, etc. I like it overall, but a few things have been a bit disappointing... And you'll find the Ironmaster website will not post reviews that are not 100% favorable.
What pther things could be better on the IM2000 besides what you metioned already??
Kelley Nadine that’s what I was going to ask myself. From a design standpoint I have a bunch of ideas on how I would change a few things to make it better or just add more attachment like they have been.
Was specifically did you not like I’m the IM2000??
Good questions... Initially I'll reiterate that overall it's pretty well built, versatile, etc. I already mentioned the main issue I'd like to see done. I'm a home gym guy, but a home gym typically requires more set up, and that both adds time, and slows down what you're doing. Most things you'll just have to figure out as you're using it. But one other thing I'll tell you about is the leg press plate (I have pkg E). The plate is only about 6" wide so can't get your whole foot on it, and it's perfectly flat (no angle) limiting ROM a little. The answer I received was that I could attach a piece of plywood or something to it, etc. I'm sorry, but for the price I would expect all the basic housekeeping to be done on it, and common sensical characteristics to be included. There are after all plans you can find online to build your own wooden bubba gym if that's what you want. Not knocking that btw, as I built a bench, etc., like that when I was a kid. Or, hey listen I understand the idea of keeping the price down for most people, but that doesn't mean premium options can't be available and offered as an upgrade at the time of purchase.
Don Quixote Thank you for your detailed response. I wish it was adjustable too. I will have to make the wooden attachment and straps because I need that angle to do it in comfort. I watched this video hundreds of times and can’t wait to get it. I love hearing from people like yourself with input. There is not much information on the internet about the IM2000 and I know Ironmaster sold many of them. There is maybe a total of 8 people online that talk about it and it made me wonder why more people don’t talk about the machine if it’s that good. Is your cable system still working smoothly? I found out its monthly that it should be sprayed with Silicone and not every few months like they recommend. Thanks again 🙏🏼
@@Fitforacting Yes, the cable system works fine. For general protection and aesthetics I probably could clean and lube it a bit more, but I haven't. Make sure you put it together according to the instructions (which you'll find you kinda have to, not many short cuts), so that everything starts out aligned properly and that goes a long way to make it flow smoothly. This may be some guys mistake because they don't want to look at the map on a road trip, so to speak. Another thing is notice mentioned was that you don't always have to use so much weight on it (because it only has a couple of pulleys). Some guys are probably too focused on the weights and lube might be the difference in a half a pound or something...(???) One quirk about the cable part is that where the cable comes out and down at the top front of the machine, the pulley doesn't turn (and there's no way to make it and still have a functional unit). The result of this is you need to be aware of it as you pull the cable out. You can pull the cable anywhere along the plane of the pulley (an upgrade from my previous machine), but not laterally or perpendicular to the pulley. If you do that regularly it could damage the vinyl cover on the cable, etc., and or the pulley, and consequently it may not roll as smoothly. It's common sense, and you should notice it right away, but some people won't consider it. So, use it, don't abuse it, then just lube it as it needs and it should be just fine. I've had mine for about five years and it looks and works about like it did when I took it out of the box.
Great video, man.
I've been interest in IronMaster products for years now, but never pulled the trigger. The COVID-19 outbreak has me taking a serious look at finally putting together a home gym. I've looked at other brands and found ForceUSA rack systems appealing as well. Specifically their Folding MyRack. I'd lose the Smith and cable capabilities though if I went that route. Still leaning towards IronMaster. I should have bought one sooner rather than later because IronMaster recently discontinued their Pec Dec attachment. I love pec decs to supplement dumbbell flys, so having the option was a huge plus. Really kicking myself over not pulling the trigger years ago.
I'm still looking around for the most versatile setup. Anyone wanna chime in and help me make up my mind on IronMaster or recommend something else? Looking for something that's as versatile as can be while not taking up massive amounts of space (planning on putting it in a spare bedroom).
Timothy Wolfe the ironmaster quality is hard to beat. Not to mention it barely takes up room. I think you’d be hard pressed to find something else that beats it in these categories.
Incorporate the Smith machine into a lat pulldown? I say why not?
That is tough having to do lat pulldowns from the floor. I am 6'4", I saw where someone on this comment section said forget this machine if you are over 6', what do you think?
I'm not over 6', but what I do is simply kneel down. I can't sit on the floor with my legs extended like that to do pulldowns either, it's very uncomfortable on my lower back, etc.
I'm just about 6' 5" and have the same concerns... Did you end up purchasing? I'd love to know how it turned out.
Ken R I talked to Scott at Ironmaster and they have a 6’4” guy that goes to the showroom and trains with no problems
hulkyouup I will make videos when I get mine to show how tough it is to use for Taller people. I’m 6’3”
@@Fitforacting looking forward to your videos
Awesome mate 👏
What is the difference this system of smith machine vs standart poweetec roller smith machine
It's sorta stupid when they charge extra to put wheels on the bench
Candi Soda But you're still saving a ton of money than compared to Rogue benches where they don't even have attachments. Just because it's 11 gauge they charge almost $1000 for the one that comes with one attachment. Ripping people off.
Yeah, I also went back and added that feature. Thinking it should just come with it, or available as a purchase option to save on shipping costs, etc. (You know, click on a box with wheels for an extra $, or no wheels.)
Mad Max that’s a lot for a bench. Wow
Can you disconnect the bar to use as a free weight also? I have the super bench and most accessories and love it
You just answered my question. I’m subbing now
Reynaldo Balmes I subbed you back! Thanks for the support
Drew Bishop quick question for you. Do you think the Olympic adapters for plates it will slide on better? Or did it improve over time. Last thing is which bar did you buy? They have 2 on the website. An elite on and a regular one
Reynaldo Balmes I’m not sure what you’re asking. The Olympic sleeves are necessary if that’s what you mean. At the time, they only had one bar. So it was probably the regular one.
Drew Bishop I’m asking about the bars that hold the weights behind the machine. They sell Olympic sleeves on the website that might make them slide on better
Did you purchase any additional add-ons or did everything you show come part of the kit? Just ordered my dumbells and looking to continue to add to my home gym over time but I dont have a lot of space so I havent pulled the trigger on any other equipment yet. Originally was planning to go with Force G12 but for the savings Ironmaster seems like a no brainer (roughly $2,199 savings).
I purchased the leg press the h9oks for free weight the leg extension and the pull up bar
great review I've had mine for about a year and I love it....best investment anyone can make
what attachments did you get?
I bought the Ironmaster when I was 18 and I'm 43 now! Even after taking it apart and putting it back together a dozen times through all those years (from moving) it still works perfectly. Amazing machine and will last a lifetime.
merdon133 everything except the hypercore attachments
Carlos Mendoza Why the change of heart? I seen you comment on another video that you are selling the 2000?
Chris Payne what are your thoughts on their pec dec attachment? I’m contemplating if I want to get that one since it would only be for chest really
Can we do decline incline bench press in this
Yes
IM2000 review begins at 3:12
Is there any other way to do lat pull downs without sitting on the floor?
Kneel down, that's how I do them. Not as bad as it sounds, you'd actually just be simulating doing a pull up with bent knees in that position. I can't sit down and do pulldowns with my legs outstretched like that, it's hard on the lower back, to me anyway...
Just use a bench and sit down on it. If the weight is too heavy then put your legs into the leg ext attachment on the super bench
Don Quixote do you have any videos of your IM2000 on your page?
Was interested in this machine . Still recommend it ? Does it look big in person ? Thanks !
Not big no. I recommend still!
@@drewbishopfitness Thank you for replying back !👍👍👍
Are you stilling doing videos with Brian?
Reynaldo Balmes probably. If we do, probably wont be until May or June at the latest. Just taking a break right now. Still working out consistently and eating properly. Just taking classes and doing life for a little while.
Hey Drew, what attachment do you recommend to get and which ones you don;t?
Daniel Granger don't get the calf raise attachment. you can improvise. Get the pull up bar and leg press plate. Also, get the v grips for low rows etc.
I ordered everything except weights, Academy has the #300 set on sale for $150 so i bought 2 of those and trying to sell 1 bar
merdon133 how have the weights held up? What the website for academy?
That bar is to heavy for me , do you know how I could use a lower weight ?
If you’re talking about using cable movements with a lower weight, you can hook the cable up to a kettlebell or loading pin. I also have a 25lb plate that has holes to grip the plate so I can hook up the cable to a 20lb. kettlebell, a 25lb. plate, and then the bar is 36 lbs. with no weight. Those increments are good enough for me but yeah basically anything you can hang on that hook that is lighter than the 36 lb. bar will work.
@@brianmccrum299 Thank you! Ended up purchasing it .
I'm practically a newbie, but I do see many people talk badly about the smith machine. I believe unnatural bar direction and your not balancing the weight so you are cheating yourself. Can I please get some feedback? This looks like a real nice setup, but I'd like opinion from owners on the 2 complaints I mentioned. I appreciate it!
RIP EVO this Smith machine feels like real free weight! It doesn't have a balancing or counter system. Literally like gravity! It's great. It correlates to real-life free weight and I actually prefer to row and deadlift with it. I get great isolation out of it!
Depends on what you're doing with it, and in the end what you like it for, and don't like it for. Currently, I use it for standing calf raises, and shoulder shrugs. With some exercises like these, the balancing issue is moot and actually is useful in the case of calf raises. Everything else I prefer a free bar for bar path issues you mentioned.
But the free weight and spotter arms for barbell that allow for barbell workouts. In addition to the cable and smith. Only thing that is missing is the function traininer. Then again it's OK because the price justifies it.
Thanks for the feedback!
good video. Like it. Too bad the cage is too low
Hey Drew, I'm considering platform options with the IM2000. How do you find it's stability without being anchored down to the floor with and without the load of stored plates? Wondering if having the IM2000 on top of a platform without anchoring will be fine or should I consider an insert type with means to anchor to the floor. Would rather leave on top without anchoring, but looking for some feedback. Keep up the great work. Thx.
It holds itself down with no issues, with or without plates stored on it! great question.
Chulisimaaa!!!! 💪🙂
If you over 6 foot forget this and even the Super Bench.
Jack Carter why? Just curious
What problems are you having? im 6'2" and find it works fine for me.
Jack Carter why is that? Someone who is 6’4” trains with the IM2000 at the corporate office in WA with no issues. Have you ever used it?
TheVelluch Did you make any videos of your setup?
by the way, i just found out ironmaster product is good. but the customer service SUCKS !
Rwnzo FC really?? Call and use extension 104. That’s for Scott. I think he is the owner and he will take care of you. Sorry about that. No I don’t work for them but have used them for years
@@Fitforacting Scott is not the owner, but does handle the majority of customer service...You may also ask for Jacob. Thank you. Rest assured Ironmaster customer service remains topnotch, and easily accessible.
mjbtaiwan thank you. I didn’t know Matt was the owner at the time I wrote that. Since then, I’ve got the chance to visit Ironmaster HQ and love their products even more now.
bro just add the word "ironmaster" and you will ten duple your likes views subs, etc.
Rwnzo FC I'm confused? it's in the title and it's in the tags too? always has been. enlighten me?
i mean, you have to put it in the title. look at all your videos and the ones with ironmaster in the title have the most views. by far. tags are not as powerful as title words
Rwnzo FC it's always been in the title! go read the title and tell me what you see? I've never changed the title haha
im talking bout your other videos. compared to this one. they low.
i bought the cable tower instead of what you have. i also have the bench and dumbbells and a whole of accesories. i can tell you which works best. good luck
Rwnzo FC tell me about your likes and dislikes of the cable tower please? I was thinking about getting it before I found the IM2000.
Also I totally agree with you. Not many people put Ironmaster in their titles and there isn’t many videos out there so that will increase numbers for sure
iron master smith machine review and then spends first 5minutes reviewing the ironmaster bench LOL
Don’t hate. Appreciate.
Be Honest! IT doesn't come with the IM2000 ! You buy it Separately!
Never said it came with
@@drewbishopfitness Whatever, how would you rate it compared to Commercial Gym...all you have from IRONMASTER?
Smith machine? the highest tech, most expensive, shiniest piece of equipment is always inferior to a low tech piece of iron.
This machine does it all as you can see. Nothing beats Iron for price and effectiveness but.....if you are alone and not safe, you can die. At least having this machine will keep you alive if used properly and you still have accessories like spotter arms, smith machine, or suspension straps from spud. Going to you channel to see your workout vids 💪🏽