Anderson Frontline 11.5" - Wear & Tear After 1500 Rounds Suppressed
Vložit
- čas přidán 16. 06. 2024
- Check out the Anderson Frontline here -
Support The Channel - lnk.bio/RTTGunsNGear
Newsletter - Deals & Videos - mailchi.mp/7002e3c327ba/deals...
Website - rttgunsgear.com/
Instagram - / rtt.guns.gear
CZcams - / rttgunsgear
Rumble - rumble.com/c/RTTGunsGear
Mail Call:
RTT: Guns & Gear
PO Box 1463
Cortaro, AZ. 85652
NOTICE
The purpose of this video is for education only. The views and reviews expressed in this video are that of my own and are not intended to facilitate any sales. Any review is based on my experience with the product(s) featured. No firearms or products are advertised to be sold in this or any video on this channel, and RTT: Guns & Gear does not sell firearms. All live firing of firearms is done in a controlled environment on a closed and safe range, by trained professionals, or under the supervision of trained professionals.
**Contact**
Email - rttgunsgear@gmail.com
00:00 Introduction
04:21 Hammer/Trigger Wear
04:50 BCG Wear
06:21 Charging Handle Wear
06:40 Rings Condition
07:06 Locking Lugs
07:24 Buffer Weight Face
07:43 Upper Receiver
08:12 Firing & Ejection Pattern
09:52 Final Thoughts & Ending
#2ndamendment #povertypony #anderson #arpistol - Zábava
honestly anderson has gotten better over the years.
id still put them in the bottom tier of acceptable firearms. but still if you need a gun on a very tight budget they seem to work.
@RenoMay There's essentially two "go-to" companies for me when suggesting a budget AR. Anderson and Radical Firearms. Thanks Reno!
Always had great experience with Anderson
Same here! Thanks!
I've never owned a complete Anderson rifle ir pistol.I have however and do own Anderson lowe parts kits and they have never let me down. Thanks fir the video and product update evaluation.
Thanks for watching!
Great Follow up I got a couple more parts on the way for mine and I will have it back out again and then I should be over the 1000 round mark
Awesome!! Can't Wait to see the final product. Thanks Chris!
You don’t have to spend a fortune to build a great AR
True, but its fun to spend it
Anderson,Radical,ect. are obviously not BCM or SOLGW but I’ve never had an issue with one of them except a BCA .350 legend that didn’t like certain mags.
Thanks for watching! Seems like a pretty minor issue considering that BCA was probably $400? Good stuff.
I love my Anderson and tell everyone I know they are so underrated !!!
Fucking badass!
Thanks bro!
Thanks for the video .
Thanks for watching!
Cheers Brother!!👍👍
Thanks Vborg! Back at you!
I thought Anderson is pretty much a great company which makes great items...
You would be right. Thanks!
Thank you. Ive been a handgun guy, but see that long guns need to be a part of my collection, for all the reasons. So many reasons.
I appreciate straight forward information. I cant stand all the gatekeeping classist snobism involved in the community. Not every person can just drop 2k at the basic whim.
We should be encouraging the community to grow. We should encourage competition among manufacturers. These things drive progress.
If i can spend $6-700 on an instrument that performs well, i will do so.
These snobs out there.. do you only wear fancy name brand tee shirts? Designer jeans? Well, go ahead lil dandy boys.. do your thang. I was taught that real men snd women dont need name brand reassurance to feel cool. I understand thst there are quality levels. This creator never once said this is top line gear. This was made clear several times.
I like this channel more and more every time i watch a vid.
I'm glad you made this video thank you
Have 4-5 Anderson lowers have always been great
Nice editing job, getting all those close-up pics of the parts.
Thanks silverwings! Good to see you!
@@RTTGunsGear You're welcome.
Fuckin Boss intro!
Hey, the facts are this, your body aint gonna give a stale fart difference if the bullet shot in your body and you start leaking plasma, if it was shot from a $600/$1600/$3200 gun!..
The arrow does not make the Indian
True statement! Thanks for watching!
@@RTTGunsGear I've got DelTon, ATI, DPMS, PSA that within 100 yards, I can drill an paper plate all day long.
The guy that trains frequently with his $600 Poverty Pony, and can hit his targets all day long or the Guy that has a dust bunny Knights SR15 who goes to the range to show off his spendy toy, but can't capitalize on that $3000+ investment, has wasted his money! I know, I have some high end ARs that I'd sell if I could do I could put more funds into ammo. My Wilson Combat AR15 gets ran daily dry fire and depending upon the weather and work makes trips to the range 2 times a month. I am going to be finding a 800+ yard range soon, and going to be making it a DMR and only running 75-77 grain target ammo, GPR is my DelTon, I've put a Roscoe barrel on it, Rave trigger, super 42 buffer spring and H1 buffer, and BCM BCG, it's just a great all around rifle now, and soon the YHM Suppressed upper and it will become the home defense/backpack gun.
Expensive but happy hobby
Everything you said...very well said...keep kicking ass...love all your videos..
Thanks! I appreciate it!
I bought a Anderson because of you thank you
Bought an AERO lower and trigger pin holes out of spec and did nothing but walk out. Brand new lower and uppers no matter which was loose. Turned around and bought a Pony lower and works great tight fitment and no pins walking even feels better shooting. I have 4 lowers now and not one problem with them. What matters is that it’s made correctly regardless of the manufacturer.
I’ll stand with Anderson before I choose AERO
Always had good luck with Anderson. They run just like their stable mates, Colt, Unbranded, NoDak, Aero, ArmaLite.....
I don't own or have ever owned an Anderson but this is good to know. Looks good 👍
Thanks!
I don't think a lot of people know Anderson has some LEO actual street cred!
Yes they do I’m a retired marine and US Marshall the AR I had in my trunk had a Anderson lower I had a SW MP 15 it was so loose fitting between between the upper and lower hated that so I built my own with and Anderson lower I have at least 6 different uppers in different calipers all fit tight on my 2 Anderson lowers
@@fredsalyer538.. the "loose fit" doesnt matter. I do get the irritation though
@@jamesstephenson2346 my second Anderson lower I use for long range shooting I put a timney drop in trigger in it well worth it I have a BCA upper in 6.5 Grendel at 500 yards I can put every bullet in a 3 inch group 6.5 Grendel is an incredible round same velocity and speed as a 308 and energy
Hey Bubba, any chance you can keep doing more reviews on her. I'm telling my buddies and the most common interest is the longevity of the rail lockup. Looks like a potential steal. Thanks for your work!
Once I hit 5K, or close to it, I'll do another. Thanks man!!
Very very very interesting 👏 👌 👍
Thanks bro!!!
Anderson is far from trash, my first ever build was a PSA kit with an Anderson lower, 2nd rifle was a BCM upper with an Anderson lower, in those days you could buy a stripped Anderson lower out the door for 50 bucks. I then moved on to using Aero Lowers and BCM uppers and now run a Daniel Defense DDM4V7, each step was a noticeable jump in quality (though the BCM guns were better gassed than my DD)This gun makes alot of sense for 600 or under, but if we get into the 700 dollar territory, a BCM upper and complete PSA lower (or Aero or even Anderson lower) are the way to go for a duty grade rifle IMO. Though this gun would be absolutely fine as a training rifle, home defense rifle, truck gun or plinker. Andersons QC has definitely improved, I’d say it’s better than PSA, and close if not on par with Aero which had QC problems of their own a year or 2 ago.
I'm not overly impressed with DD. Especially for the money. And you put more faith in PSA than I ever would. But I've also seen far more PSA rifles that had either major to minor issues, that ones that actually ran well. But I do 100% agree with you that there are definitely levels in this game. And the quality jumps are noticeable. Thanks for watching!
@@RTTGunsGear I enjoy your content, and the fact you actually put rounds on stuff before putting out a video, keep it coming!
@@spankyt10 thanks man!
Funny enough, I’ve never had problems with Anderson or Aero lower parts kits but I recently bought a LPK from PSA and all the roll pins were slightly oversized making it a bitch to assemble.
Pretty typical for PSA. Out of spec
Love the vids. Sorry internet operators called names and were shitty. I run mostly higher tier guns (including kac and lmt), but i value and enjoy your content. Your info is useful to me, as most of my friends arent stupid like me, and dont waste money on "overpriced" (to them) guns
Tell them gun snobs what to do !👍👍🇺🇸
The funny truth is all the gun snobs talking trash with their DD and Troy industries Gucci guns and $30k in NODS and gear would be the first to get clapped by 'Bubba' with his PSA Feedom AR and Polymer 80 home build pistol when the SHTF...
Nice 🇺🇲
Thanks!
Why don’t you review products like BCM, Aero or DD?
If I could afford them, I would. BCM is great though!
AERO has become garbage their epc receiver is only thing the make that’s decent
@@daviddrago9360 that’s a bold statement, considering how many lowers alone that they sell along with their other products you’d think there would be more proof their products are as bad as you say they are right? I’ve had numerous aero lowers and some uppers and I shoot just about every weekend and they’ve all been fantastic.
👍🇺🇸
My 1st Anderson pistol full build failed me out the box. Not saying its trash. Surprised, you run a shockwave blade seems people don't like them I still run mine. Great in depth video though .
I don't run a Shockwave. It's Magpul's newest bad idea brace. They took the Shockwave and made it somehow worse. It came on the gun from Anderson. In my review of this firearm, I did say that I'd rather have seen an SBA3 on it. Thanks for watching!
@RTTGunsGear yea, you did, 😆. The blade came with mine, actually .
What round are you running through it if it’s 300 blackout gotta get a lighter buffer spring problem solved
I strongly recommend a company called bear creek arsenal in North Carolina all totally mill spec I have three uppers in different calipers you can buy a complete upper for under 400 bucks never a problem shoots tighter groups than my colt upper I have one that’s a side charging very cool I have one in 450 bushmaster a cannon all on Anderson lowers
And I’m a retired marine recon scout sniper
Had one bad experience with Anderson had a charging handle and that broke with a huge crack down the charging handle. Only and last experience. Can't say much with just one bad experience. Never had a rifle of theirs. Not saying Anderson is bad or good.
Thanks for sharing and watching!
Anderson lowers are just like everything else. AR lowers. Which is priced fairly. A lot of the bugie brands are just hype. Spending money to just spend money is asinine.
Ive built many rifles with Anderson uppers lowers and parts and only ever had 1 lower receiver out of spec. Even the top tier class has QC issues to and don't tell they don't because you would be a lier. I'm in the industry and have seen their issues
Anderson receiver sets are my "go-to" for any start of a project. Thanks!
Poverty pony to the rescue 😅
There is a lot of gate keeping in the firearms community. This brand is trash, the brand I like is way better blah blah blah. Some brands are known for being quality and often come at a higher price but many brands are getting by on name recognition also. No one thinks of BCA, PSA, or Anderson being top tier but these companies are capable of producing good items at a lower price point but also send out more lemons versus the higher priced companies. Part of the price of a great weapon is the reject bin.
I made a video about this some time ago. And that is with budget firearms, expect budget QC. Often times the prices are low because they're able to trim the fat off of man hours involved. And since you can't cut the man hours of the assemblers, because you then couldn't build a rifle at all. You have to make the QC checks less frequent. On the scale of budget AR's. I put Anderson and Radical on the top, far over the next two. Which is BCA, then PSA. Thanks for the comment and watching!