Construction of a MEGA sized Modern Home PT 20
Vložit
- čas přidán 9. 09. 2024
- PDS Debt is offering a free debt analysis. It only takes thirty seconds. Get yours at PDSDebt.com/PE...
Get first dibs on our NEW Official Gear... HATS, SHIRTS, STICKERS and DRINK WEAR! Link below.
www.perkinsbui...
Buy the Tool Belt we designed and wear!
perkinsbuilder...
Slim... Lightweight... Comfortable... Carries all the tools you need!
This video follows a group of woodworkers as they work on framing the walls of a home construction project. They carefully measure and mark the locations for bolting down the pressure-treated bottom plates, ensuring the walls will be level and plumb. The team discusses techniques like overdrilling the bolt holes to make installation easier. They use a laser level to find the average height across the walls and determine the optimal stud length. Overall, it provides an informative look at the meticulous process of framing a house from the ground up.
Attention Pros!
Get your exclusive SashcoPro Sample kit now. Enhance your craftsmanship with high-performance sealants. Claim here: www.sashco.com...
Subscribe to Building Jays Way (Jason from our Crew!)
/ @building_jays_way
Get amazing deals on HARDWARE, FIXTURES and TOOLS at:
perkinsdeals.com
Get a 15% discount on ALL of the Truewerk gear we wear With their Pro Deals:
truewerk.com/p...
Check out Zip System
www.huberwood....
Learn more about us at:
www.perkinsbui...
Learn more about the RSS and R4 screws
www.grkfastene...
You can visit Bryson City and stay in a House WE BUILT! Link below (has all of Jaime's Rentals):
airbnb.com/h/p...
brysoncityfarm...
#building
#construction
#huberpartner - Jak na to + styl
Wood!!!!!!!!!!!!!!!!!!!!!!!!!!!
That's what she said.
only took 20 episodes for y'all to build a wall :P
And thank you PDS for giving us spoilers on how the build is commencing 😉 👍
Haha
Been waiting for this moment for what feels like forever
Its heart-warming that Jamie can talk about his hand around others in a light-hearted, humorous way. The doctor-support team (nurses, tecs, specialists) never get paid enough. Most of them do it because of their dedication to their fellow citizens. Its humbling to witness how people overcome their handicaps.
My brain cannot reconcile why seeing 3 stud walls up feels like so much more progress than all of the civil and concrete work to date.
That's why building stud walls is so much more fun😆
Visual progress is always the most rewarding part of any project.
They also put all the plates on the top and bottom, plus all that measuring! The build will go a lot faster now.
The difference from the end of the video to the advert in the middle is wild, really starting to take shape now that the wood is going up.
I had to fast forward because I don't like spoilers.
That advert was a crime....😂, show us that progress and finish the video with 2 walls......😂
Yeah, there’s a lot of bait on the hook. 🐠
I loved seeing the Arlo content - his years of experience interjecting tips all the time.
Now, it’s great watching y’all teaching Max on the site. So much patience and how-to.
This is such great content
Man, I almost forgot you guys worked with wood. 😂😂 So good to hear the nail gun going again. :)
OMG that comment is fire!
That’s “re-markable”. Jamie always has the best one-liners. Clever and funny 😂
Jamie, it looked to me like that construction calculator said your stud length should have been 107 7/8", not the 107 1/8" as mentioned in the video @12:40. Was the camera lying to me?
EDIT: Of course, I see that Eric caught the error... Good job, Eric!
Noticed that myself and had a mild panic!
The boys need an optometrist video sponsor. 😂
Or a speaking calculator 😂@@rossmatheson4303
I just got my reminder postcard from the eye dr. today so when I saw 107 7/8 I looked 3 times!
Same here is said 7/8
Hooray framing at last, I love watching framing. 😊
I'm always disappointed when these videos end. I just can't get enough! 😍
Friends; your videos are top high like a high IMDb TV series, each episode awaited impatiently. You are not just building a home but also entertaining people. What you are doing is priceless. 🎉
BEST TIME OF THE DAY... PERKINS BUILDER BROTHERS VIDEO TIME!
Using explaining to Max as a means to going over how you operate and recording it for your videos seems like an awesome opportunity. Great video yet again, dudes!
I have to say Jaime really thinks things through. I like his method of tackling projects. He really wants to eliminate snags that could cause a delay or delays on the project. Hats off to the Perkins Bros. & company. 👏👏👏👏👏👏👏👏👏
Stud heights. I would use Tim's trick. Using the suspended caulk line and get an unique length for each individual stud height. This accounts for any variabilty at floor level and slab level simultaneously.
Tim = awesome framers.
100% chalk line and string…dead nuts
Nice to see two brothers getting along so well!
Pro Tip! Don’t leave anything long term on the stamped concrete while it’s still curing. It will wick out the moisture and leave a shadow outline of whatever was placed on it.
I enjoy watching you, professional carpenters do your work.
I was taught years ago the fast way to mark boards for drill spots. Just set the board in place on top of the bolts, then wack it on the top of the board. That will mark an impression on the board where the drilling needs to be done.
Nuts and wood....I'm in!
💀
It never gets old does it? Timeless humor that makes me chuckle every time
@@moxielouise For sure!
That letter is nostalgic.
My dad was a building drafter/designer for decades and his handwriting is exactly like that to this day.
Don't worry, I can't bloody read it either sometimes.
Most jobs our company does call for Hilti/Simpson anchor bolts that allow you to just hammer drill into the concrete and start the layout wherever it's convenient. So we don't use double bottom plates unless the gypcrete is tall enough to interfere with hanging dry-wall, which doesn't typically happen on a concrete floor.
Hilti power tools are the beast of power tools, and darn reliable to boot...
I like the old-fashioned way of put the board on the anchors and give it a good old whack.
Wherever the depressions are are exactly where the the bolts need to go.
Thank you, Larry Haun
Ive never seen the crew so excited to do ANYTHING with the walls! haha! Everyone laying sill seal, measuring bolt spacing, marking plates....you guys are awesome!
Finally some wood! I can't wait to see this HUGE house
Pro tip for yall. Bring along an angle grinder with really any disc on it, and use it to erase marks on your plates when you want to start fresh!
Max is learning from the best, but definitely drinking water from a fire hose right now! :)
it’s amazing the weird stuff that transfers across disciplines. i sew as a hobby (not a woodworker… yet!) but i’ve taken to marking my fabric measurements in a similar way to how you do measure marks for your cut lines. it’s been surprisingly helpful!
I now understand what y'all are doing with the transition of the cliff on the higher elevation...very clever and a Great use of available space , keeping as much of the land for building
Now we're getting somewhere. We'll done guys it's coming along nicely 👌 🙏🙏🙏
All the best from Thailand 🇹🇭
I get so ridiculously excited when a new video drops. It's a video of some blokes building some stuff, yet here I am, giddy at the prospect of watching some blokes build some stuff 🤷♂️
Love watching the entire process, with all the challenges and complications so far. Bring on the framing and flooring etc...!!
13:09 That is exactly why we have a little stroke crossing "7" in Europe.
Between Eric and Jay they have inspired me to start my own CZcams Journey... Thank you for the great content :) Keep It Up!!!
Your channel is awesome !!!!
Thanks, guys, for the fun times while watching your video! KUTGW
Yay for wood! And I love the sponsor ads with the spoilers! Noticed the SP team in the background! It was great getting to meet them at 1 mil sub celebration!
Be safe guys ~ ❤
Hi Jamie and team! I just wanted to say I think your hand looks rad, of course you'd probably rather have your fingers but I think it just looks awesome like this, almost like some terminator type hero lol.
Nice build house 🏠
For extra air tightness, consider laying a bead or two of sealant on both sides of the sill gasket as its primary role limits wicking if Im not mistaken.
You guys should use the square washers for that. They have better holding strength than the round ones do.
I was thinking that too.
40 cents vs. $2.50 ea. and they meet code.
22:23 the raptors are awesome!!
Y’all finally get to frame. Your debt relief ad gave a sneak preview with the walls and trusses up. Very cool.
...Always look forward to the woodworking bit...Cheers from Fiji...
I had the same issue but I cut every stud a different length to the laser and had a perfectly lever floor.
When tape was cut on concrete(@ 03:24 time) - pro tip - it is better to cut it @ angle, as then it will be loger edge for watter to travel through (cnsidering it was squeezed) rather when it is straight :)
This is 100 times better than watchin any series on any other platform...all fun , no drama and lots of education, is really great to watch and learn from pros like you...
By the way Jamie almost squashed Jono at 15:10
I love the stamped concrete
Man A guy never wants to mess with Jason when hes in his rhythm !
Seems that stamped concrete would be a pain to mop.
I don't if that's for an exterior patio or interior
I would be putting flooring protection down over the entire concrete slab for the duration of the build so it doesnt get damaged. Walking dirt covered boots onto it will scratch it to pieces over the full build, or just one dropped tool and its game over
you know how it goes, when you have a off from remodeling/rehab houses and you start your morning with building videos.. awesome!
Shocked that in 2024 with all the building science we have, know about and implement that we still use such an arcane sill sealer foam!! I’m surprised that these guys wouldn’t spend a bit more time to maybe use a non shrink grout? There has to be a better system?
As an EMT I used those Raptor shears a lot and they are the real deal. They aren't cheap so I hope you guys take care of them. They really do cut through about anything.
The way everyone gets along and jokes with each other is what makes this channel fun to watch.
I thought this day would never come.
I love that hat Jaime.
Man, bothe the banging on the nut tip and the foam cutting tip are like small but awesome protips Eric because you can use them in so many situations, gj!
Im here for the weather.... Last couple months down here in SE Arizona have been shit Hot... so this is cooool
Enjoy watching your videos. Great editing, great hats, enjoy the humor, enjoy seeing the mountains, and love everyone’s
personality and to learn something new everyday.
Is your family related to Francis Perkins? She worked as Secretary of Labor for President FD Roosevelt
Oh shit! Another Perkins Bros Video! Woooooooohooooooo
It’s nice to see you guys building headers this way because last place I built had boxed headers filled with insulation just like you guys did here and like I’ve always done it in the past. The building inspector walked through everything and said it’s all perfect except last minute as he walks out asked what’s in between the headers. I explained and he asked if there’s any blocking connecting both sides nailed together on both sides of the 2x10 or is it just hollow with insulation. I said no it’s hollow, he didn’t like that. After standing around scratching our heads with him on an easy way to fix it… which there really isn’t, he let it go and said next time add blocks and nail from each side to make it a “solid member” even though it was nailed top and bottom. Can’t really argue with an inspector can only work with them
I like the sneak peak of the trusses lol
Thank God! Done with the concrete forming!
Happy to hang out with you guys. Be safe and take care.
Whoa. Building walls.
It’s so good to know that you are actually going to be using hammers, nails & screws to build with wood yeah. It has seemed to us out here this has taken forever to get to this stage but no fear the Perkins Builders Boys are here. I know that I’m going to enjoy this part of the build as I imagine the homeowners are as well. Keep them coming to entertain us love you guys ❤❤❤
Great to see stud walls going up!!! And, I am getting ready to set some sill plates (Never done it before, either. So... your explanation of how to do it is real timely!!). Wish me luck!!
Ray is awesome. We need arlow to stop by again he is the real og.
I noticed on Matt R's latest video he talked about putting a line of Lexell both under and over the sill membrane. Something to consider for the future. It's also interesting that he's been a CZcamsr for a LONG time compared to you guys yet he's only got a couple hundred thousand users more than you. At your current rate of growth you're going to be surpassing him... maybe this year.
be interesting to see how the finish floor holds up during the build
I was thinking the same thing. Looks nice but might end up getting real beat up by the end.
Hello guys, amazing...from now on we will see faster progress in the construction. This math used to calculate the height gave me a headache. I am following this mega construction step by step. Big hug to the whole team here in São Paulo - Brazil.
Come on guy's let's get Building Jay's Way up to 100k 🎉❤
I could watch you boys everyday. Amazing chemistry and so skilled at your craft
Thank you 🎉
Should always square the foundation up and snap lines on the inside, instead of keeping the pressure treated plates flush with the outside of the foundation or slab. No matter how square you think you got it during forming
from jimmy james walker and then johno says thank you jake hahaha love u guys.
@12:45 - Doesn't it say, "107 7/8", not 107 1/8 ?
So happy to see framing going up!!!
In Ireland we bed on our wall plates on top of walls with mortar. To level them all up then fix them through it when the cement is dry..
Just as excited as you guys: framing!!!!
ill be honest i love watching the video's as they come out but cant wait till we can watch a start to finish view think its going to be another amazing build . thinking its going to be around 80 video's by the time its done.
This WOOD part of this build will last an eternity 😂
Hey guys as always I love your videos it’s a high light of my week jus some friendly advice about the tower here in the uk we have to have training on construction of the tower you too had rails should be on the inside and the lower one should be just above the short ends the reason for the hand rails being on the inside is if you to fall they could pop out if the clip end has failed but if to pole is in the way you wouldn’t fall hope this makes sense great work tho guys cheers John
good job. I love building ❤❤❤
So crazy to see people build a house with imperial measurements, the wild inaccuracy of it all.. but I guess it works in the end
I was about to comment you read the calculator wrong. I'm glad you caught that, pro move double checking...
like seeing those red tools 🧰
Cover the stamped concrete! I’ve had more nervous suspense than watching a thriller😂😬😬😬😬😬😬😬
Moving along 🎉
You guys are too awesome. An absolutely integral part of my day! Thank you!
😊 excellent video as always. Now retired, I loose track of days. Spent all day yesterday waiting for you guys just to realize it was Wednesday. Beautiful work & job site.
You guys should really check out the Bosch SpeedCut drills. They cut like BUTTER because it has a screw in the center that PULLS the drill through the wood. I honestly didn't think there would be such a dramatic difference between a regular flat-bit drill and those but they are insane!
I think that the OSHA Fall Safety law does not allow workers to be on scaffolding higher that 4 feet while it is moving.
However, that might have been changed since the law was re-written in the late 90's. Many companies use scissor lifts or extension booms (Genie) to keep their workers safe while moving.
i saw the 7/8 on the calculator and was then glad you decided to double check!!! Whew!!!
Spoiler alert on the ad reads. Trusses look good 😂
Wooood morning good to see some walls going up.
13:22 oh man, time to get a powder actuated nailer. Bang a few fixings in to hold your plate in place and then come back with your bolts or other threaded fixings to finish it off.
Framing finally. Holy cow this house has a lot of steps
nice to see a couple concrete pros like yourself branch out into woodworking, best of luck on the new endeavour!
Finally wood!!!
First video that played instantly first try, no ads
Coming together nicely. Looking good.