How To Tune Your Flipsky(Vesc) | Basic Setup For Your Flipsky 75200 Pro & BombMoto B1!
Vložit
- čas přidán 22. 04. 2024
- For More Vesc Videos & Info Check Out E-force CZcams Channel! - / @e-force-kc
Get your BombMoto B1 here! - bombmoto.com
Amazon affiliate link for a Flipsky 75200 pro v2 - amzn.to/4at6y2g
Or grab a plug & play kit from eforcemotorsandcontrollers.co
Desktop Vesc Tool Link! - vesc-project.com/vesc_tool
help support the channel by joining my patreon! - patreon.com/Emx_Brandon?...
BombMoto Electric Dirtbikes group - m. groups/6501191...
Mototec Electric Pitbikes Group - groups/10831...
Dm/follow me on instagram - / emxbrandon
music by my brother check out his channel on youtube - / theaustinely
if you like video games check him out on twitch too! - / waifuandhusbando
filmed on my insta360 one rs/galaxy s24 ultra
insta 360 affiliate link! - www.insta360.com/sal/ace-pro?...
Bikes-
72v mototec qs165
48v razor rsf650 etm kit
72v bombmoto b1
09 ktm 105xc - Zábava
Morgan walked me through a lot of this for my son's ebox with a Flipsky. He was very informative but this helps a lot as well since I'll be doing further mods. Appreciate the info
Morgan's the man! Hopefully this vid helps for your future projects!
Yess brother! The community is going to be stoked with this 🔥🔥🔥 Another great video, I appreciate the hard work bro 🤙🏼
Appreciate you brother and taking your time to help others! That's what it's all about!
He is the only guy that made the vesc tool app make sense for me setting up my scooter 14 inches direct drive dual motor 72v 100ah set up with tronic 2 dual controller.Thanks man . I subscribed just cus
I appreciate that! Stoked I could help!
Thanks for making this video. Helps clarify some of these settings.
Glad it was helpful!
Hi. Thank you for the good information. Can I know the advection that sets the phase current to 240amp when setting the flipsky motor current max? Is esc okay if I set it like that? I'm not sure about the concept of phase current.
great job on the video. I picked up 5 mph with the 12t.
Awesome, that's good to know I'll be testing that soon!
Hey I have a domino throttle and after I set everything up on vesc now whenever I turn it on it goes full throttle any idea how to fix it or how to wire the domino and the flipsky
What colors are the throttle wires? I've never dealt with a domino before but you make have 3.3v and adc1 backwards.
Hallelujah. Thank you for making this. I’m 💯 on the vesc bus now. This is probably a stupid noob question but do you know how I can find the specs on a FW11? Pole pair etc…. I don’t even know if it has a temp sensor 🤦🏻♂️. Thanks again, this is video is so helpful 🤙🏻
No problem! And I'm not sure of all the specs, it's definitely a 5pole pair. You might be able to find all the specs in eforcemotorsandcontrollers.co
Hey I’m stuck I just got a new flipsky 75200 pro and I have a qs138 I did everything up untell the test I run it and the wheel moves and everything but it says test failed vesc not detected so I’m confused and I can’t find any vid explaining how to
I'm not sure about that, I've never experienced that myself. I recommend jumping on some vesc groups on Facebook or some forums and asking others aswell.
Hey Brandon, I’m trying to find out exact dimensions for the battery compartment. I’m selling my razor and going to build one of these with a 72450. What size should I get from Allen for the controller to still fit in the compartment too? I don’t have chassis yet to measure. I would like my amps to be more than 100 that’s why I don’t want the bombmoto battery.
Hey! They have a list of batterys they make using the b1 battery case! Makes it super easy and you'll still be able to fit the controller
Hey bro i bought my b1 off of the market place. How do i know if i got a v1 or a v2. Basically need. To know which motor i have? If u coupd help me out that would be amazing. Thank u. Great videos btw
Are the pegs lowered under the frame? And does the motor have a waterproof 6 pin for the hall sensor? Is so you have a v2, if not you have a v1.
@EmxBrandon thanks brother. Much appreciated. I have the v2 then forsure!
I’m getting an over voltage fault, check voltage is below limit. Any help lol thanks
Just messaged you back on insta
This is a bit random but do you have any tips for wheelies? I watched your wheelie video and got some good tips, but I’m still having some trouble. My problem is that I either don’t get far back enough for balance point, or if I do I go too far back. When I get too far back, I hit the brakes too hard which brings me all the way down. However, I don’t want to hit the brakes too softly and then loop out. Any tips for this? Thanks in advance. Also, if it changes anything, I use a fardriver, not a vesc.
Honestly it sounds like your on the right path, keep going back further and pressing those brakes. Even if your hitting them too hard your getting it drilled into your reflexes. Eventually you'll start to soften up on the brake and learn to trust it! It's all about seat time and not giving up!
Hey when going above 10% throttle my vesc blinks red and cuts out. After a second it comes back.
No idea, never dealt with that issue one mine. Screen record the top rt data page as the problem is happening and check for any fault codes.
@@EmxBrandon yeah, it says overcurrent error. For some reason a little stock gearing mototec dirt bike is trying to draw 200 amps. When i set it to its default 35a it has almost no torque. hopefully somethings wrong and its not super slow.
Your setting battery amps to 35? Not motor amps correct? I'd set battery amps to like 50 and motor amps to 220 with motor absolute amps to 420.
@@EmxBrandonThanks for the advice. I ended using the setup again and just leaving the settings as is. Im using vesc 75100, which can only handle 200 amps .Also do motors draw hundreds of amps in vesc, is that meant to be happening?
I have a flipsky pro v2 on a bafang. But it gives a hard punch to the motor at the bottom of the gas handle. It feels just like a punch u also hear it. Can i get this away by curving the voltage / amps?
I'm not following you, is it cogging or just too much power for you on take off?
@@EmxBrandon I dont know what the problem is. The bike rides about 70 km/h. Its rly fast.. But it just gives a bang/punch at the bottom. Like at 0.1% throttle.... U dont have this on your bike? Might be the BAFANG motor.
English is also my native so. I think the torque kicks in. Like DIRECT DRIVE ..
O the VESC tool says my bike rides 300km/h u know how to fix this?
@ThePunis-Her hmm I'm not too sure about the bang at the beginning. Is this a hub drive motor on a scooter? I'm not familiar with bafang
Hi. Thank you for the good information. Can I know the advection that sets the phase current to 240amp when setting the flipsky motor current max? Is esc okay if I set it like that? I'm not sure about the concept of phase current.
Hey I'm not sure what your asking?