Only good advice in this is to use a recover battery outside the plane. Thanks for at least making a video but racing through the process isn’t the same as teaching it.
I have FrSky X18S with a R9 SX access receiver. I’ve been watching videos and I’ve managed to register and bind the receiver. I’ve been attempting to set up a model and gone through the steps, but I don’t get any reaction or movement to any servos. I see in the output page, I see things moving. Any help would be nice. Thanks When I register the receiver do I select both the 2.4 and 900?
Ciao, di recente ho acquistato una X20 con due riceventi TD R10. Con entrambe ho fatto registrazione e binding... i comandi degli aerei funzionano correttamente, ma non riesco a visualizzare i valori RSSI (nè 2.4, nè 900 Mhz) sul radiocamando. Mi sai spiegare quale potrebbe essere il problema? Grazie. P:S: ho aggiornato il firmware ETOS sull'RX, ma non quello del modulo interno perchè non funziona il sito FRSKY.
You can go to the TD R10 "Option" page of the receiver, check if the "telemetry" option is enabled, and go to the telemetry page and select "discover new sensors"
…who dares…or want to…or doesnt disgust…frsky…after how they treated and treat customers!!!…tx16 and edgetx or opentx as an example of the future in this hobby…
Sure would help if you do video without your hand in the middle of the radio screen so we could see what your tapping on.
Only good advice in this is to use a recover battery outside the plane. Thanks for at least making a video but racing through the process isn’t the same as teaching it.
I have FrSky X18S with a R9 SX access receiver. I’ve been watching videos and I’ve managed to register and bind the receiver. I’ve been attempting to set up a model and gone through the steps, but I don’t get any reaction or movement to any servos. I see in the output page, I see things moving. Any help would be nice. Thanks
When I register the receiver do I select both the 2.4 and 900?
Slow and again, please
Ciao, di recente ho acquistato una X20 con due riceventi TD R10. Con entrambe ho fatto registrazione e binding... i comandi degli aerei funzionano correttamente, ma non riesco a visualizzare i valori RSSI (nè 2.4, nè 900 Mhz) sul radiocamando. Mi sai spiegare quale potrebbe essere il problema? Grazie. P:S: ho aggiornato il firmware ETOS sull'RX, ma non quello del modulo interno perchè non funziona il sito FRSKY.
You can go to the TD R10 "Option" page of the receiver, check if the "telemetry" option is enabled, and go to the telemetry page and select "discover new sensors"
how to assign the switches
You can assign switches to control corresponding channels on the Mixer page
Brilliant ! Cover up the screen with your paws, say nothing, and pretend you know what you're doing.
…who dares…or want to…or doesnt disgust…frsky…after how they treated and treat customers!!!…tx16 and edgetx or opentx as an example of the future in this hobby…
WERE YOU JUST TRYING TO BE A SMART ASS
Too fast!!!!
Yes too fast and at times the hand blocking the screen.