All About Boat Bilge Pumps

Sdílet
Vložit
  • čas přidán 24. 07. 2024
  • Almost every boat that has a hull (aluminum or fiberglass) has a bilge pump. What does it do and how should you operate it? Good question. In this video we will cover all about boat bilge pumps:
    0:00 Intro
    0:34 How does a boat bilge pump work?
    1:40 How do I use the bilge pump?
    3:05 Boat bilge pump tips.
    _________________________________________________
    For more info check out these resources:
    Subscribe to our channel! / lenscove
    *What is a boat bilge blower?
    • What is a Blower on a ...
    *One on one boat chat to ask me questions:
    app.hubspot.com/meetings/sean715
    *Len's Cove Learning Center:
    www.lenscove.com/learning-cen...
    ________________________
    Connect with us!
    ▶lenscove.com
    ▶ / lenscove
    ▶ / lenscovem
    ▶ / lenscovem
  • Auta a dopravní prostředky

Komentáře • 62

  • @boatinglessons
    @boatinglessons  Před rokem +4

    Is your bilge pump automatic float switch wired directly to your battery (always on)? Tell us your opinion on this.

    • @thatboatbroad
      @thatboatbroad Před rokem

      The bilge pump most often is the only component that over rides the battery switch being turned off.

    • @brian395
      @brian395 Před rokem +4

      I rewired ours with its own fuse directly to the battery as our boat would have required leaving the battery switch on for the auto feature to work.

    • @SeanHorsfall
      @SeanHorsfall Před rokem +1

      @@brian395 well done!

    • @therealdylanlenton
      @therealdylanlenton Před 11 měsíci

      Always, preferably an all in one unit. My current boat has a separate switch that I attached a floaty to so it engages earlier and keeps the hull fully drained. I can't imagine any reason why not to have the bilge wired for always on. Sure there's a risk something happens and your battery is drained, if that's a huge concern, get a solar trickle charger. But as someone who's had a boat sink at the dock, it's worth it to just leave it on.

    • @ratdude747
      @ratdude747 Před 9 měsíci +1

      Mine is just an on-off switch, no float. 1976 simplicity!

  • @borg304
    @borg304 Před rokem +3

    Super good. ! I learned a lot.

  • @pcoladawg
    @pcoladawg Před rokem +1

    That was helpful; how about a video on bilge maintenance.

  • @brandoni3326
    @brandoni3326 Před rokem +5

    Great video, and thank you for the continued informational boating videos! Would you consider doing a video in the future on trailer maintenance (coupler / surge brakes, bearing lubrication systems such as grease, oil bath, vault, etc.)?
    Thanks!

    • @boatinglessons
      @boatinglessons  Před rokem +1

      Brandon. So are you suggesting reviewing what are common trailer maintenance items?

    • @brandoni3326
      @brandoni3326 Před rokem

      @@boatinglessons Yes, that would be great. With particular attention to bearings if you could please.

    • @SeanHorsfall
      @SeanHorsfall Před rokem

      @@brandoni3326 good timing - we are shooting today. I will see if we can for that in :)

  • @camilaheredia513
    @camilaheredia513 Před rokem

    Hi, I have a highfield 420 classic coach boat and I don’t know what to do with the scuppers at the end of the day. The bilge pump always runs (connected straight to the battery) and is automatic. On the manual it says (N/A) as opposed to (closed or open) so I don’t know if it’s best to leave them open overnight while the boat is still on the water, but not being used (moored). I’ve done some tests and I’ve realized that the bilge pump doesn’t pump all the water out, but when the scuppers (they look like plugs) are taken off the rest of the water in the boat that wasn’t initially pumped starts draining out through the scuppers and the bilge pump goes on and pumps water out. I started to think that the scupper plugs are connected to the chamber where the bilge pump is located and as water goes through the hole the bilge pump activates. I don’t know if there is a problem with leaving the scuppers open when the boat is moored. If you know the answer can you please explain why the boat has scuppers, why the bilge pump doesn’t pump all water out and why is the bilge pump hidden in a chamber?

  • @hornetsnestmedia
    @hornetsnestmedia Před 11 měsíci

    I remember growing up on Lake Norman, NC, my dad was dockmaster at a lakeside condo development. In the 8 or so years we lived there, 4 boats went down due to muskrats. My dad would go check the docks every morning, and he would find one down. Interesting times as a young lad.

  • @francus7227
    @francus7227 Před rokem +1

    Good idea to keep one with 20' of wire and two alligator clips for a portable back up. If you see a boat in distress, you can lend it ... even use it from your battery with boats tied together....

  • @Jay-he5kz
    @Jay-he5kz Před 25 dny

    Can you turn on pump when not in water

  • @drtlc9793
    @drtlc9793 Před rokem

    Hi Len, have you ever come across that the automatic float switch was not working. I was about to replace a new Float switch, after I remove the old float switch by cutting the 2 brown wires. I was testing to see if the bilge pump would work so I touched the 2 brown wires together and the bilge did not turn on. But I can manually hit the bilge button and the bilge does turn on.
    The five amp fuse of the automatic bilge pump was intact.
    Any thought ?
    My bilge is a rule 1100 GPH ( does not have a built-in automatic)
    Thanks in advance

    • @boatinglessons
      @boatinglessons  Před rokem

      Yes absolutely, the switches fail frequently. We replace several a year

    • @WellsLarry
      @WellsLarry Před rokem

      No matter how it is configured, one of the wires has to go to the bilge pump. Find out which float switch wire has continuity to the bilge pump to what polarity it is connected. If you don't have that, that's the problem. If you do, then the other side of float switch is open and you will know its polarity. You can make a test jumper to connect directly to the battery from the float switch to run the pump.

  • @vincentrossi4153
    @vincentrossi4153 Před rokem

    What is your thoughts on boat lifts vs leaving a 21 feet open deck boat in the water with boat whips?

    • @boatinglessons
      @boatinglessons  Před rokem

      Boat lifts are always superior for protection and longevity of your boat. They cost more and require more maintenance.

  • @Natter20002
    @Natter20002 Před rokem +2

    Len, what is the % of boats that have water in their bilges that sit in the marina? I mean is it almost every single one?

    • @boatinglessons
      @boatinglessons  Před rokem +1

      Yes, bilges are almost always damp when they are in the water and only really dry when they have been on land, inside, with the drain plug out and at the right angle for a while

  • @crypto7162
    @crypto7162 Před rokem +1

    Can you do a video on Bimini tops. How to adjust it properly? Tight or loose? Mine is always coming loose. Big pain in the butt to always adjust it. I see the arms are all adjustable. Why?

    • @boatinglessons
      @boatinglessons  Před rokem

      What type of boat is it?

    • @crypto7162
      @crypto7162 Před rokem

      @@boatinglessons Hello! We have a Larson. 22ft cuddy.

    • @crypto7162
      @crypto7162 Před rokem

      @@boatinglessons We love your videos!

  • @OvertheRoadVideos
    @OvertheRoadVideos Před rokem +2

    What happens if the bilge stayed on because I forgot to to manual off. Does it burn out if no water? Thanks and sub'd

    • @Shade_Tree_Mechanic
      @Shade_Tree_Mechanic Před rokem

      They're mostly cooled by fluid flowing through them, much like fuel pumps. Running dry could certainly cause damage to the pump

    • @therealdylanlenton
      @therealdylanlenton Před 11 měsíci

      This is why it's better to just buy either a pump that's automatic (my personal preference) or one with a switch in the bilge, leaves a lot less room for human error.

  • @robertstorms5539
    @robertstorms5539 Před rokem

    Len, I know this is a bilge pump video but do you know the recommended time to replace a water pump. I have a 2020 Robalo. My mechanic recommended every 3 years which means I would be replacing it next year.

    • @boatinglessons
      @boatinglessons  Před rokem

      Hi Robert. I agree with that recommendation. It likely is ok to five years but the peace of mind is priceless. Have you seen our impeller video?

    • @boatinglessons
      @boatinglessons  Před rokem

      czcams.com/video/m97mrI5s3QU/video.html

    • @robertstorms5539
      @robertstorms5539 Před rokem

      @@boatinglessons I have watched that. I'm sure that might be on the maintenance list to but the mechanic made the water pump recommendation last year when I put the boat in. At the time the boat only had 165 hours on it. Thank you for the quick reply.

    • @SeanHorsfall
      @SeanHorsfall Před rokem

      @@robertstorms5539 the years (time) is often a bigger factor than the hours (use).

    • @brian395
      @brian395 Před rokem

      5 years is what I was always told but then again we are freshwater less corrosive issues

  • @KieranCox
    @KieranCox Před rokem +1

    Nice video! Small note: we don't have basements in the south western United States, so all those sump pump references mean nothing to like a third of America! Lol

    • @boatinglessons
      @boatinglessons  Před rokem +2

      I totally knew that, dumb of me not to remember - biased from the North! 🤣

    • @KieranCox
      @KieranCox Před rokem +1

      @@boatinglessons All good! Love your tutorial videos! Big ups from Las Vegas!

  • @rapidcars1
    @rapidcars1 Před 7 měsíci

    if my boat has a bilge pumps do i still need drain plug? and why?

    • @boatinglessons
      @boatinglessons  Před 7 měsíci

      A bilge pump does not completely drain a boat as it cannot suck every last drop out. The drain plug is to be removed when the boat is out of the water.

  • @BenVaserlan
    @BenVaserlan Před 2 měsíci

    1:33 'condensate"

  • @elmametzloff3017
    @elmametzloff3017 Před 11 měsíci

    Condensate is not a word.

  • @jaydowwg8150
    @jaydowwg8150 Před rokem

    Does a bass boat from 94 have one ???

    • @boatinglessons
      @boatinglessons  Před rokem

      Yes, it should. On a bass boat though they are often very rare to see/access

    • @jaydowwg8150
      @jaydowwg8150 Před rokem

      @@boatinglessons thanks

    • @elaineatkinson223
      @elaineatkinson223 Před rokem

      Lol, ya just change the old towel once a season. 😂

  • @A5JDZK
    @A5JDZK Před rokem +2

    Why do they fail so often??? The manufacturer seems to blame the dealer and vice versa. I hear these are common problems on Key West Boats.

    • @chevyon37s
      @chevyon37s Před dnem

      Because they’re extremely cheaply manufactured pumps that easily corrode inside and crappy cheap wiring attached to the pumps that corrodes and creates high resistance or a complete failure of the wire.

  • @ajcc0280
    @ajcc0280 Před 3 měsíci

    -1

  • @gerrys6265
    @gerrys6265 Před 11 měsíci

    "all" about? ..c'mon

  • @Chanharp
    @Chanharp Před rokem +1

    Sorry but no, not every boat has a bilge pump. Don't spread misinformation.

    • @donnellclark5949
      @donnellclark5949 Před rokem

      He said almost every…. Don’t be an idiot

    • @Curtis69213
      @Curtis69213 Před rokem +7

      He said “almost” every boat. You should have listened first

    • @Johnrider1234
      @Johnrider1234 Před rokem

      Well it is up to the owner to put one in.

    • @-Cece
      @-Cece Před 6 měsíci

      My basement doesn't have a sump pump. Sometimes I think it should......

    • @NotYet8
      @NotYet8 Před 5 měsíci

      Our education system has failed him 🥹