SCX24 Brushless Combo?
Vložit
- čas přidán 26. 08. 2024
- Trying to find an alternative to the Holmes Revolver since its been discontinued. This surpass outrunner motor seems to be a great option. Especially for $17!! Paired with the castle micro sidewinder 2 it’s ultra smooth and mounts easily to the 380 mount from shapeways.
The best esc imo for the scx24 is the Furitek! Check out my videos on them and pick either model up here
Tegu esc with case & Bluetooth can be purchased here
www.avantlink....
Lizard esc with Bluetooth can be purchased here
www.avantlink....
Motor can be found here
Goolsky SURPASS High Performance 2204 1400KV 14 Poles Brushless Motor for RC Airplane Fixed-wing www.amazon.com...
New improved motor mount for surpass motor can be found here!
www.shapeways....
Gear set that I drilled for a pinion found here
GREEN FABWOOD 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear (Original Version) www.amazon.com...
If you can get the hot racing mod 5 spur conversion for the scx24 you can use this pinion with it! Get the 3mm for the surpass motor shaft.
www.ebay.com/i...
Don’t forget the fullsendrc.com DISCOUNT CODE 2fmrc for 15% off your order!
Full send site found here
fullsendrc.com/
Contact me at 2fastmattracing@gmail.com
If you’d like to donate to help support the channel & get a shoutout on the channel you can donate by PayPal here!
www.paypal.me/...
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~
Got myself a C10 a couple days ago and would just like to thank you for being great help, I'm new to the hobby and you're making everything clear and interesting. Keep up the great videos :D
Congrats! Thanks for the comment. Sorry I missed it until now. I don’t notified as much anymore so I have to search through the comments. Really appreciate you watching!
Maybe this is the most capable scx24 out there. Good job.
Did pretty much the same on a WPL C24 with a really cheap 1806 Racestar 2200kv and it is still Powerfull enough for the heavyer WPL. Had to modify the motor pretty much by building a new shaft with reduction from 3mm to 2mm. I have used a powerdrill an a dremel tool to simulate a Lathe. Drilling the pinion leads mostly to an untrue running of the gear, but it seems like you just got it right (no bad sounds from bad pinion mesh). I like that you modify your cars very much since the RC Hobby especially with cars is all about RTR nowadays. But for me tinkering is the real fun. Greetings from Germany
It's nice to know that it can reasonably be done without some kind of crazy fab-work or too much of a headache. I just got the gunmetal C-10 so will definitely be doing some good stuff to it before to long. Thanks man.
Watch your eyes on the holmes hobbies 050 motors for the enduro, but can fit the scx24 with the mounts, Also test out different brushless esc for the outrunner, Cheapo 30a brushless esc, see how they work, all and all great video as always and nice little rig !
Yeah I keep waiting for it. I seen they posted another one that WASN’T ready yet. Not too worried about it now. This motor is killer and will probably cost less anyway lol. I’m hoping to get a cheapo brushless esc running well with it soon. Merry Christmas!
That's a sweet setup. I was kinda wondering when someone was going to convert to brushless. Good going!
Merry Christmas!!
Oh yeah I’ve been running brushless in this one for about 6 months now. Just looking for motor options since the old one I had in it has been discontinued.
Merry Christmas!
@@2fmrc I haven't seen anyone else make the conversion yet. Just people talking about it.
@@rcclassiccrawlers4368 yeah it’s not too bad of a swap really. I’m gonna do another one from start soon hopefully and make an install vid on it
Couldn’t wait to watch the CZcams vid after seeing the teaser on FB! Well done
Thanks so much!
New Ray toys sells side-by-side diecast that are actually plastic just the Motors diecast heads up if you want a X3 or Polaris body on your rock crawler keep up the great work
I think it's amazing you should do some videos on a complete build
I'm keen to see the result of this, the castle sidewinder micro is out of stock everywhere in the UK right now. I've had my eye on a few amazon revolver style motors but I yet to find a heli/ plane esc with reverse that also has good low speed control...
Yeah same here. Waiting on a couple more to arrive now. Hard to find a good esc for this setup. The castle is king but insanely hard to find atm.
@@2fmrc nice i cant wait to see your video on that
This is incredible! I'm new to the hobby and had no idea you could modify these things to this extent. You definitely helped me decide to get an SCX24!
Nice!!! Welcome to the addiction lol. Let me know if you need anything!
@@2fmrc thank you!
@@SeanOBTrini you need to check out my 4ws “dig rig” scx24 if you think this thing is impressive 😉
@@2fmrc Wow that thing is insane!It has immediately become clear that I will need more than one of these ! Got my Deadbolt today and am really impressed with it. Just created an instagram (mud_missions_rc) to share pictures of its adventures and mods if you are interested
@@SeanOBTrini sweet!! I’ll definitely check out the insta! I’m always posting on there as well. You will definitely need more than 1! Too hard to decide which way you wanna mod them because there are so many awesome ideas out there!
In my 1st capra, (to my Fms atlas 6x6), I used brushed outrunner rc plane motors. You can get any size with a 1mm to 5mm motor shaft size. Amazon, most are from $10 to $20 max.👍
Merry Christmas sir!
Man, that is a nice setup! That speed makes it so much more fun for me!
Thanks! Pretty fun for sure
@@2fmrc Do you know if it has enough speed to jump little card board ramps? I plan to run it kinda like a buggy inside my house.
@@jstyleent I’ll try it out!
@@2fmrc Thanks! I watched another youtuber Gamyrc who put a 130 size 50 turn motor thats pretty fast. I wondering what you had in yours? The ramps would be pretty small and I just want to know how if it can handle like a buggy in how it lands. I plan on making a hybrid buggy/crawling course in my living room lol
That’s bad ass you should look into trying out different brushless systems for these scx24s there’s a brushless sensored system for these on eBay that would make a great video
Add this to you great video!👍👍 I'd love to see a whole build put together. I'm not sure I'm up for doing one myself if I could watch one 1st would be very help.
Yeah I’m planning to do that. I’ll probably order another motor mount and do the complete build. Hoping to find a cheap esc option as well.
@@2fmrc sometimes you get what you pay for, but sometimes cheaper good too! Always stoked to see your new stuff, keep sharing please
Rig is looking good and performing good. Thnx for the research.
Thanks so much! Having a blast with it.
What a treat for xmas morning great video buddy
Merry Christmas!! Thanks so much. Hope you have a great day!
I've been looking for a outrunner motor since the hh 380 was discontinued but wasn't sure what to go with. Thanks for the great video, I'll probably order this motor option and hopefully find a sidewinder micro 2 in stock
Yeah it’s the perfect replacement! Good luck on the esc. I figure they’ll be back in stock eventually. I hope anyway!
@@2fmrc my local hobby shop has the esc motor combo, worst case I'll buy that but we'll see
@@The96civicrider luckily I bought one up before they got so hard to get. So it’s sitting in the package waiting for the perfect build lol
Nice job and 4ws yeah
Hah! Right on, I bought the same bag of gears.
Yes gears are a hard one to source.
3mm shaft? Dang!
Hey thanks for the info.
Oh hey, you ever try those drone batts?
One on each side of the motor, down low, run in parallel...
This is awesome share the knowledge from a to z so we can be enlightened.
I'd be all for getting this setup. Seems its all for PRE ORDER? I certainly want this setup
The motor and their conversion kit is up for preorder now. Their esc has been available for a bit.
Good upgrade
It sounds like it's got a turbo it looks sick great job
That’s one of my favorite things about an out runner! I love the sound lol
Really nice bro one of the better scx 24s I've seen. I dig the 4-wheel steering and the suspension on it has quite a bit of flex as well that's awesome. Like the course you have set up that's cool too can't wait to see what it looks like when you get everything figured out. Take care Merry Christmas happy holiday
Sweet so awesome great job
Thanks!
Do you have a video that shows your suspension setup on this rig?
I hate this video so much, where can i report it for being jealous? 😭🤣🤣 awesome stuff as always man Merry Xmas!!
Great video 😊🤩
Thanks!
Snappy fast reaction. Merry Christmas friend.
Merry Christmas!!
Awesome setup!! You're the SCX24 king!!
Thanks! Always messing with something lol
Have you figured out a better pinion gear? I got the motor and shapways mount from your link. Still waiting on the shapways. Going to use a micro mamba x
Yes! I’m running this one at the moment.
www.ebay.com/itm/0-5M12T-2mm-3mm-Bore-Hole-12-Tooth-Width-5mm-Module-0-5-Motor-Metal-Spur-Gear-/143818307321?_trksid=p2349624.m46890.l49292
I have ran 2 eflight 920 kv motors in my super size moa clod crawler. they have a 3 1/8th shaft to run standard pinions for the 32p. I am not sure if the 380 size revolver is bigger than these or not tho. but they have gobs of torque to turn 8" tires with a 6 tooth pinions. Love trying new motors to see whats what. I usually run the smallest setup for weight savings.
Sounded like Robocop had a baby with a blender! Guess its time for a sound kit right? Lol merry Christmas Matt
Haha! It sounds awesome in person. I love that sound! Merry Christmas!!
@9:12 - wisdom tooth removal PTSD triggered 😖
😂
Bruh you can literally drift 😂. that’s awesome! Merry Christmas!!!
Haha! Could be interesting!
I really like the quarry you have on your SCX24 ! Where can I find myself a set up like that? Hope somebody didn’t already ask this question in the thread. Anyhow, thanks
The quarry? Body?
@@2fmrc yeah sorry my auto correct messed that up 🤷🏻♂️. The body ?
@@Kevin_Casey I figured that lol. It’s actually off of a little toy car from a loves gas station. Kinda hard to find now. They had one very similar at wal mart for awhile.
Looks more like a heli motor . ive got some old losi 2.0 stuff ive been thinking about trying to myake work with the scx24
Yeah it’s a drone motor I believe lol
I would get more pinion gears like what you have on the revolver and drill one out to 3mm and use that over plastic. I can't imagine something with that power not destroying a plastic gear under a lot of stress
Can you do a review on the ebay AE-6 sensored brushless ESC motor combo reverse 3 wire Rx? Full set is motor + ESC + programming card for $123.. I haven't seen anyone review it yet
In my opinion that thing is way too high of a kv motor. They market it for an scx24 but it’s probably not going to do well in one. Maybe for more speed but I would think the torque would reall suffer. I’ll see if they’d be willing to work with me on trying one out though 😉
I hope they will work out a deal. I really want to see what it does. I cannot do much myself at this point. I ordered a c10 on the 11th. It was supposed to be here yesterday (the 15th). All I have right now is new tires for it 😂
Have you looked at or seen the rocket mini z motors? You can find them from anywhere between $20-$40. I was thinking of grabbing one. But I found out I fried my scx24 esc/reciever not my motor. But check them out on amazon.
I’ll have to order one to try out lol
@@2fmrc if you need the link let me know. Ill send it your way. I'm not a 100% keen on brushless kv I always forget whether higher or lower kv# is higher or lower torque. But ive seen them range between 3500 and 11000.
Thanks for the video. Merry Christmas. My dads Betty is #5549. He's getting it tomorrow.
Nice!!! Let me know how he likes it! Merry Christmas
Sounds awesome luv the rims and tires on it I'd like to put a set on my SCX24 C10 or maybe u could since u have a C10 😉 even just to see what it looks like thanks and merry Christmas 🎅 🎄 🎁
Where could I find them bodies the rock bouncer in the back ground and the one your talking about
The one I’m talking about is kinda hard to find. It came off of a toy from a loves gas station. Just have to keep an eye out at loves stations. There was one that’s similar to it at wal mart. It’s a small little Rc from wal mart. The orange caged rig came from a website called shapeways. They 3d print lots of stuff and have several cages to choose from. Hope this helps!
I wanna see a brushless c10 I havent had a chance to convert mine cuz of all the house projects.
Yeah I’m just running the barrage in my C10. Maybe I’ll go brushless eventually. Now that I’ve found a little cheaper option. Just gotta find that budget esc now.
I’m curious what the one wire that came with it’s the same connector on both ends no idea what it’s for
So I just got the shapeways 380 revolver motor mount and I have the 1400 KV motor what did you use for hardware to mount the motor
I’m not 100% sure what I used on mine. I looked over at my little magnetic tray and seen a couple screws that looked like they may work and they did! I’ll try to see if I can figure out what is actually needed.
How did you connect the moter to the trucks power supply??
Merry Christmas Matt at 2FM RC!!!!
Merry Christmas!!!
@2FM RC been searching though all your videos, Love em all ......Whats the name of the body\shell your running on this rig? Cheers!
Really appreciate that. This body actually came off a little toy car I picked up at a loves gas station. It came with some metal panels on it so I cut some out of lexan for it. Wal mart had a toy Rc that had a similar body at one time but they are getting a little harder to find now I think.
@@2fmrc Nice, I'm located in Australia lol so I guess I'll have to go with a differnt options for an after market body! Thanks for the reply and keep up the great work!
Very cool ! Thanks very much ! I'm sorry if you mentioned this in a different video but what kind of tires and rims are on that awesome rig . I'm asking because I can't find anything within the US or Canada online. Thanks again and MERRY CHRISTMAS buddy!
No booty too wide.... LOL The worst part about the brushless is that electrical wine. I have heard there are some motors or escs that cut that down tremendously. heard of 3 bros racing? I see they have a hornet outrunner in 540 size that are supposed to be quiet tek, but think they have a smaller motor coming out soon.
Where did you get the body shell for that rc car?
It came off a little toy from a loves gas station. It came with metal panels on it. I cut some lexan and made my own panels to lighten it up a bit.
Nice video and conversion. I have a C10 converted to brushless with the HH380 revolver and a micro sidewinder 2.
Love the setup and on 3S it’s a blast. Do you know if there is anyway to turn off the beeping on the esc? The esc beeps if the truck is sitting idle for a while (I believe to let you know it’s still on?!?). I wonder if there’s a way to program that notification beep away using the Tx.
do you know any stronger motor? i have a furitek komodo with a 20 tooth pinion on 2s. works great on my 2ws rig, but coggs alot on my 4ws.
dont want to change to 15tooth and change to 3s. big strong brushed 35t or something??
remember my 35t 450 motor on scx10, that was torq for 3 rigs and speed
did you have to program the micro sidewinder?
I don’t think you would have to if I remember correctly. I did mine because at first I used it with the barrage motor so I had to switch it to brushed mode. I did change a few minor settings while doing that but nothing that I think would have to be done honestly. I used the castle link for my pc.
Do they make metal internal transmission gears for the scx24 gearbox?
The only ones I know of are some on eBay like kyx and some other knockoff brands. I heard a few people say they weren’t very smooth and they had to go back stock. I’ve been running brushless setups in my scx24s for a good year now and haven’t had a single gear stripped so I just run the plastic ones.
@@2fmrc and those are the internal gears and not just the spur and pinion gears? Cuz u can get a metal spur and pinions but then the weak spot if the internal plastic gears inside the sxc24 transmission
why not use an inrunner motor? are there none that fit? or is the performance of the out runners just better?
There really isn’t any that run as smooth. All of the smaller inrunners really seem to lack torque and smoothness. A good esc helps but to me these outrunners are the way to go. Especially for the torque available.
@@2fmrc makes sense, looks like I'm gonna convert mine to brushless then, thanks for thr vid
Looks like you are going to need to make the course harder.lol. so easy now for your rigs.
Yeah I’ve been running a few stock trucks on it lately and it’s crazy how much more challenging it is with them than these modded rigs 😂. Hopefully I’ll be building a new course soon!
Did you ever come up with a alterNet esc for that castle running the little outrunner motors
Waiting on a slow boat from China lol. I have a couple options that should be coming within the next wk I’d say. Then I’ll do some testing!
@@2fmrc sweet can’t wait for that update video thanks for the killer content
Thats a sweet setup. What wheels are those?
Those are the rc4wd rage beadlocks. Kinetic-Kms makes a set very similar that I have as well.
Merry Christmas
Merry Christmas!!! Hope you have a great one!
@@2fmrc u did I got a red deadbolt scx24
@@braydonmckay7334 nice!!!
Are those hills made out of spray foam?
Yep! My indoor course in the garage lol
@@2fmrc could you do a video about how to make terrain?
@@gfyracing7632 one of my first videos actually shows how I built the 1st section of my course. I basically just repeated it for the second section and added a couple more obstacles. If you go to my channel and dig deep you should find it. Let me know if you can’t find it! It’s a 2 part video and should be titled
How To Build A 1/24 Indoor Crawler Course For Cheap! Part 1 of 2
Too much going on for me. Lol cool vid
What site did you buy the castle esc off of? All I’m finding is bundles for almost $100
I have a Hh revolver. I need an esc for it
That’s what I had in this truck before. I ran the castle micro sidewinder 2 esc with it. CRAZY SMOOTH!
I've been trying to find one without a motor . I'm curious on what your going to try .is hh the better option as a motor? I see the other looks to be bigger . Wondering if it had more torque cause of its mass. Id like to drop it in betty. Do u think there's enough room?
@@1aview yeah there’s room. Just gotta make it fit lol
Nice. Gona have to order that mount and find an esc. thanks for the info. I'm be watching 👀
I just orderd this to try. Sounds good on paper lol
I bet you haven't seen a rig like mine
I'm runningnlego wheels and they fit like they were made for the scx24 and rock creepers