TRX-4 axle based Gspeed V3
Vložit
- čas přidán 14. 07. 2021
- Quick rundown video over the components I used in building a trx4 based gspeed V3 chassis
GSPEED- gspeedchassis.com/
TGH- www.teamgaragehack.com/
Ottsix- www.ottsix.com/
3BRC- www.3brothersrc.com/
ITWRC- intheworksrc.com/
Hobbytown- www.hobbytown.com
Amain- www.amainhobbies.com/
Tower hobby - www.towerhobbies.com/.
Dlux fab- dluxfab.com/
IERC SCALER- iercscaler.com/shop/ols/products
dixielandrc.ecwid.com/
sorrca.com/
hardcore-rc.ecwid.com/
www.crawlpedia.com/4_link_sus...
supershafty.com/
www.beeftubes.com/store/c1/Fe...
www.vanquishproducts.com/
trealhobby.com/
SOR Racing- www.shopsorgraphics.com/
Man, after watching this I forsee big mods in store for my trx4 sport. Love that build and thanks for sharing 🤙
Great video! I will try to check in on tonight’s live stream. ✌🏼
Thks for sharing bro! Cheer
Great video my rc friend, thank for info. Great job 😃💪
So looking forward to this upload 🥳
Great work man.
Truck looks great.
I hate having poison ivy ! I feel for you bro!! Thanks to you soon I will be building myself a Gspeed chassis going try replicate pretty close to your builds! So awesome!!!
oh gosh nice truck
Subbed bud nice rigs
Nice build Rc fam homey try a 54t with a13 or 14t pinion gear✊🏽👊🏽
Dude, thank you very much for this very informative video! I have been wanting to build a TRX4 sport axle LCG rig for over a year now, and I have only been crawling with 2 RTR rigs for …about a year. So I am new at this. I just subscribed to your channel, it came up on my feed, I guess since I just contacted Gabe@ GSpeed looking for a little advice. I don’t do facebook, so that makes things a little difficult. I am a “Knights Ferry Crawler” I don’t compete, but we have some knarly terrain at knights ferry ca. I hope that I can ask you a couple of questions in the future if need be. I’m still trying to figure out what I need to make these axles work, before I buy/build them, or spend a bunch of money on stuff , just to find out, it won’t work well. Thinking about skid plates, and transmission now. I know everyone loves there outrunner motors, but both my rigs use hobbywing fusions(which I love), and I would like to use another in the future LCG rig. I’m not trying to stay within some competition guidelines either.
Hey tim, love the channel! Goin thru the menu for the links helps tons. Been wantin to get the hi-clear for my v3 chassis. U mentioned the trx4 trans bein to bulky. Have u tryed the VP vfd trans in the v3? Love it in mine. Motor is fwd n low, pulls lines my othe rigs wont
Yea i used the VFD for a little while, then went a different route but the VFD is definitely a solid transmission option
Another great video! Don't worry you're not the only one to mix up up stop and start on the camera, I do it all the time on the trail!
I have a trx4 donor rig in the pipeline, a v3 g10 and no budget lol, is there a skid plate to use stock links and tranny? I have searched but cannot find one, all are for scx10 etc, thanks again for the hard work.
Thank you. And I can’t confirm but some have mentioned using the brazin trx4 skid. ITWRC does make a kit for using the trx4 trans but you do have to use a stubby outrunner motor
Thank you sir I will investigate
Curious does it matter if the front drops out more than the rear? It looks like yours is lower in the rear ? That’s how mine is set up , I can lower the front but it won’t get full articulation on the passenger side
Great Build nice work, looks really good, what kind of steering angle you getting out the trx 4 axles? I'm running scx10 3 axles on my Gspeed I'm able to achieve really tight turns both directions? I was curious if the Trx4 axles allow for tight steering? 💯🤘🏼
10.3 portals will have better steering angles.
@@TRDAdventures just my thoughts 👍🏻Thx
Its Been a Year Tim , I have 2 G Speed Rigs now , Axial AR44 based build and the TRX4 Build , Just wondering what Hole You use in the GSpeed Multi Point Panhard Mount for the TRX4 Pan Hard link :) great to catch up on Your new Uploads , Have a nice day buddy :)
If I recall I used the outer most mount
Great build. Exactly what I want my trx4 sport to be like. I am thinking of putting in the stock tranny. What do you think?
If you get the appropriate skid it will work, I just don’t like the stock trans
@@TRDAdventures I want to use it until I can upgrade with stock links what skid do I need?
@@jettthomas9453
You can use the brazin scale flat skid with the sport transmission or the in the works skid just have to trim it down to 70mm
@@gabrielguadarrama8701 I got the v3x4 kit from in the works rc........now im just waiting on it to aee if i can use stock links and driveshafts......im also getting their x4 shock mods and springs.....and their bumpers
I used a 50 tooth Kimbrough spur gear with a 20 tooth Robinson Pinion , Harley Designs did the Math in one of his videos with over drive included in the equation , if that’s any help Tim 💁🏻♂️
Oh yea, imma have to rewatch that one.
I am very interested in building a very simular rig
Hey man love the rig! Do you know if the make a kit for panhard bar mounts for the axel??
Like a stronger panhard? On the axles
So I got capra axles and they do not have a mount for the panhard bar on the axle housing so I was wondering if they make a kit for that
@@tylernorton1216 oh ok didn’t know what axles you were referring too, yes TGH makes a panhard for Capra axles
Nice ok thanks!!
With your 80mm shocks what kind of wheel travel do you get ….. like 3.5” or 4” …?
Thanks
I tend to set mine about 1 tire height of travel
I have a V3 chassis with portal A.R. 45 axles just purchased a two low transmission I have no clue of what driveshafts I should use can someone please answer so I can order them and have them ready when the transmission comes in
Depending on your wheelbase either incision 10.2 shafts or a set of wild bores
Hi Tim, know what, I've been watching you videos for a week now and I like your contents, Something interest me thou, I want to build a crawler just like this one you featured in this video, would you guide me in building one?
This video has a all the parts I used for the build and I have other videos that Walk through the general assembly of a gspeed.
Hey quick question, do you know if the stock trx4 servo mount with the IERC lay down servo mount will work on a g speed v3 Chassis?
Not sure I haven’t used that mount
@@TRDAdventures oh ok, i guess i’ll order a chassis and hope it fits 😂🤙🏻
Anyone know what driveshafts work with a axial 3 gear trans and trx4 axles? 😬
I have used axial wildbores or incision
did you end up doing any grinding to get more steering radius?
Nope not since I changed to the treal parts
@@TRDAdventures hmm, do the Treal parts allow more throw?
@@jonthomas8487 I think a little bit yes
Use gpm aluminum c hubs
Guarantee tighter steering radius. I have a video of it beating my scx10iii
How can I message you with my first trx4 lcg build....I got the trx4 sport builders kit....gspeedv3 g10 kit and spacers, body mounts, and dual servo mount....then steel ssd beadlocks....and a crawlmaster pro and 1080 hobby wing.....I want this build to be budget minded since it's my first build ever.....can I use trx4 sport transmission until I can upgrade and can I use trx4 sport links and transmission on the v3, I need front and rear bumper what can I use budget wise? I'm going to probably get 3brc winch and servo, the yellow jacket I'm not quite ready for.....I watch you and want to use your trx4 v3 as a blue print to start my way into my local comp scene.....I watch you, Josh harley, sbg, and alot of exocage rc......your very knowledgeable man and I've learned alot so far but have questions on my trx4 build.
I’m best available thru the Facebook page, or even thru Instagram
@@TRDAdventures I'm going to Facebook you then when my gspeed and amain orders get here I got questions about overdrive.....dlux fab shocks....links....and knuckles, axle extensions etc. Thankyou, from Portland Oregon....I love your channel
The trx4 trans is the usually the issue, there are a few custome skids and stuff out there that can use the sticks trans and links, but the fitment then for motor is tight and have to run a stubby outrunner type motor. Or generally a cheaper option is like getting a element stealth trans or a scx 3 gear trans to use the more common skids.
Hi Tim , Could You do me a huge favour and let me know what the eye to eye length's of the pan hard link and the steering arm link are please , I'm getting slight bump steer , have ITW RC links and G Speed Skid with the TRX4 Axles , this final measurement is all I'm missing from the build , Thanks G9000 :)
Crap sorry just saw this I will measure tonight
Both oh mine are measuring 84mm
@@TRDAdventures I’ll try that measurement now , I’ve been getting bump steer and was about to try a different servo horn to see if that would solve the issue , Really appreciate the help Tim , thanks for taking time to measure 📏 the links 👍🏻✌🏻🤘🏻
@@grski900000000000000 I do have a longer horn on mine
@@TRDAdventures I still have the steering bump issue but the pan hard link seems much better , I’ll try and work with the different sized servo horns next and see if that will solve this last piece of the puzzle , thanks for the help Tim , looking forward to the next video ✌🏻
What is the wheelbase of this setup?
Ohhh, I see, 324MM. :)
Hey brother the names Kris and I’ve got the Rails for the Trx4 axles but I’ve had it since last April cause I have no clue on how to build? I’ve watched Phil’s first step video and is tons of help and I’ve talked to him personally and told me about you. Your an amazing builder and have great videos. And was hoping I could get some advice on my first build. I feel like I’m getting left behind in the comp crawler world and am basically still running a trail truck when I do. When I ask questions on the Facebook page I get made fun of so tried that 🙄
Please help bro I want it sooo baaad 🥺
I’m on the FB pages too and I help where I can. They scale comp scene is growing very fast. What ya got goin?
@@TRDAdventures the link pins for the skid I must have lost over time so my first question would be is where I can find or use in place of the ones provided? Can I use the 3gear axial trans with the Trx4 axles?
Would you or anyone be interested in a CR-01 shelf queen to buy or trade for a nice crawler ??????
What driveshafts did you couple to the 2lo and TRX4 axles bro ?
Just some regular scx10 Slshafts I had laying around. I have some incision shafts orderd
@@TRDAdventures any specs or a link on those dude ? I’ve used the stock TRX shafts but not super happy with them
@@RCAdventurers just search for scx10 ii incision driveshafts, should be the first thing piped up.
@@TRDAdventures cheers dude did you have to choose a specific length ?
@@RCAdventurers I didn’t for this one but if you have a longer wb you may need to look at longer custom options from like supershafty or Ottsix