Was watching this video for a future project, then realized you had silver lining as your profile pic. Was lucky enough to enjoy that boat when my uncle was the owner along side low altitude. Happy to find your channel.
They are great at marketing and customer service. There was a delay in getting my CAI for 2021 Denali HD and they sent me a $100 coupon and free shirts too. Been using their stuff since mid 80's. Plus enough stickers and badges for all of the tool boxes I have.
I was the same way when I was a kid now that I’m older I’m not dealing with drone. I want it to sound badass but when I’m in the cab I want it quiet. Banks caters to the adult market.
Careful removing the original sensor lines from the exhaust bungs. The exhaust on these vehicles gets so hot that the fittings on those sensors lines weld to the exhaust pipe. Sensor lines will bend prior to fitting busting loose. I know from experience.
This was great. I was looking into this but for the price, I will just cut off the reducer and use the 4 inch mandrel bent 45 degree elbow into a 6 inch tip. 9:18 - thanks for this. I was wondering what it looked like in the inside.
So I have been running my mentioned configuration for the year, 4 inch into a 6 inch tip. All good. No issues. Cost, $89 bucks. Question, how is the banks holding up... have you seen any real difference?
I would have held an anometer to both tailpipes to see if there was an air speed difference…..I’d be curious about that. You’d think the air speed would be less on Banks.
I've had my banks exhaust for over 6 years now I love it every one that hears it gives me complaints. I would suggest getting the tip welded. Or putting a set tapping screws through it.
@@DuraMaxDieHard101 On an L5P 6.6l Duramax!? Or is this on the Ram 1500 ecodiesel still? Not being rude legit question because my order is being built so that would be awesome with those results after hitting it with banks lol
i'm so confused. So that giant suitcase that i thought was the muffler is the DPF. So does it have a traditional muffler anywhere? And this is just a tip reroute and that's it would you agree? Because there's no power or sound with a tailpipe to tailpipe swap right? Am i seeing this right?
@@FROGMAN524 That’s why I just ordered this dpf back exhaust. It looks better than stock, and won’t blast my trailer with hot exhaust. I know there are cheaper, similar products, but I trust Banks quality and Gale Banks’ excellent engineering skills.
@@FROGMAN524 that’s great to hear, I just threw a pair on my 21 Silverado 1500 3.0 Duramax on Monday, they seem to be really great and nearly silent. haven’t done any off-roading, towing yet. With your input I think I’ll put some on my L5P work truck in the coming months.
Wow that is the worlds most expensive exhaust tip mod ever lol
Was watching this video for a future project, then realized you had silver lining as your profile pic. Was lucky enough to enjoy that boat when my uncle was the owner along side low altitude. Happy to find your channel.
Awesome. Win Farnsworth had a great collection. Still does I see, just ocean going now.
Yes TF motorsports has really done some cool things this last year down south @@FROGMAN524
They are great at marketing and customer service. There was a delay in getting my CAI for 2021 Denali HD and they sent me a $100 coupon and free shirts too. Been using their stuff since mid 80's. Plus enough stickers and badges for all of the tool boxes I have.
Lost me when you said you don't want to hear anything lol
You'll like quiet when you grow up.. young Jedi.
💯 seriously who wants a quiet Dmax!
I was the same way when I was a kid now that I’m older I’m not dealing with drone. I want it to sound badass but when I’m in the cab I want it quiet. Banks caters to the adult market.
I'm a family man and business owner... I need my truck sounding mean. Keep your Biden exhaust
Careful removing the original sensor lines from the exhaust bungs.
The exhaust on these vehicles gets so hot that the fittings on those sensors lines weld to the exhaust pipe.
Sensor lines will bend prior to fitting busting loose.
I know from experience.
I gave you a thumbs up for rockin' the flops!!
Patented Tip.... sick
Looks great nice job 👍
This was great. I was looking into this but for the price, I will just cut off the reducer and use the 4 inch mandrel bent 45 degree elbow into a 6 inch tip. 9:18 - thanks for this. I was wondering what it looked like in the inside.
So I have been running my mentioned configuration for the year, 4 inch into a 6 inch tip. All good. No issues. Cost, $89 bucks. Question, how is the banks holding up... have you seen any real difference?
My only concern is that it will void the warranty on a new truck. GM will use any excuses to void your warranty.
I would have held an anometer to both tailpipes to see if there was an air speed difference…..I’d be curious about that. You’d think the air speed would be less on Banks.
How do you like? Will you be uploading sound clip & did you like?
How do you like? Will you be loading a sound video driving? Best regards
Did you notice any difference I performance or fuel mileage?
Woah! When are you doing the train horn review video?? Truck is lookin great!
Soon. Love it though.
I've had my banks exhaust for over 6 years now I love it every one that hears it gives me complaints. I would suggest getting the tip welded. Or putting a set tapping screws through it.
Has the chrome tip changed color any?
It’s gonna sound stock because it still is stock, muffler/Dpf filter is going to still restrict it. You pretty much just paid for an exhaust tip…
My exhaust exit is getting super hot and truck wasting more diesel. Is that normal
Its in regen mode cleaning the dpf
Is it worth $600?
Looks good.
Literally still sounds like gasser lol
Just wondering if you also have a Derringer hooked up and have you had any engine codes pop up? Thanks man, good video!
I do have the derringer. No coded everything is perfect like factory.
I have the Derringer, Exhaust, Cold Air Intake, Boost tubes all banks. 55 mph i get 32 mpg with 35x12.5x22
Mine dropped EGTs 100 degrees
@@DuraMaxDieHard101 On an L5P 6.6l Duramax!? Or is this on the Ram 1500 ecodiesel still? Not being rude legit question because my order is being built so that would be awesome with those results after hitting it with banks lol
@@DuraMaxDieHard101 is your truck deleted?
Looks like a wait of money
how do yall get the first o2 sensor off without twisting the pipe?
I'm sure it helped on back pressure. Did you do a before and after EGR test?? Apples to apples?
I did no scientific analysis, however, this for one redirects the heat away from the front of my boat trailer which I much appreciate.
Just curious if you've had any check engine lights come on! Since you've put this exhaust on. I put one on my 2023 and now I am getting a p24da
Exhaust caused me no coded.
Thanks, I'm the unlucky one.
Since it’s been a year since you did this video, have you had any discoloration on the Tip during regeneration?
None at all
i'm so confused. So that giant suitcase that i thought was the muffler is the DPF. So does it have a traditional muffler anywhere?
And this is just a tip reroute and that's it would you agree? Because there's no power or sound with a tailpipe to tailpipe swap right? Am i seeing this right?
Basically it looks better than the stock top and routes the exhaust heat away from blasting the front of your trailer during regen.
@@FROGMAN524 That’s why I just ordered this dpf back exhaust. It looks better than stock, and won’t blast my trailer with hot exhaust. I know there are cheaper, similar products, but I trust Banks quality and Gale Banks’ excellent engineering skills.
after having this for a while, what are your thoughts on this?
Love the looks, no difference in sound or performance that I can tell.
Nice exhaust but the sound is a let down
Did you notice a difference in mpg or horse power performance?
Not at all
Did you have a warranty issues after you Installed? My dealer says it could void it
I’d be curious to know this too.
Any concerns about melting plastic near bumper or mud flap during regent now that it's that much closer?
I guess he had no concerns…😂
Do you have 5th wheel gooseneck prep? Does this exhaust interfere with it at all?
I do and it doesn’t interfere at all.
Any idea if this exhaust would clear aftermarket airbags??
Clears my airlift kit just fine
@@FROGMAN524 thanks!!
Side note, How do you like those dueler revo 3’s?
They may be the best all around tires I’ve ever owned. Quiet, smooth, good in rain, dirt and rock.
@@FROGMAN524 that’s great to hear, I just threw a pair on my 21 Silverado 1500 3.0 Duramax on Monday, they seem to be really great and nearly silent. haven’t done any off-roading, towing yet. With your input I think I’ll put some on my L5P work truck in the coming months.
@@Farout397 great choice. I’ll be sticking with these on this truck and putting them in my 21 suburban when that comes due for new tires.
How do you like the bed cover?
Best cover I’ve owned
What cover is that?
Any info on if this voids any sort of warranty?
Only if it causes an issue per the magnuson moss act
Thanks but no thanks!
Let's play a game.....It's called "Just the tip"
Wait till the welds start cracking and rusting out, banks welds are shit! Save your money
Haha banks exhausts are such a joke. Their ram air and tuner is all that’s good