PlayStation 2 Optical Drive Repair!
Vložit
- čas přidán 25. 06. 2024
- Let's take a look at what's involved in fixing an original "fat" PlayStation 2 that won't read discs.
---------------------------------------------------------------------------
Please consider supporting my work on Patreon: / thisdoesnotcompute
Follow me on Twitter and Instagram! @thisdoesnotcomp
TDNC t-shirts and apparel can be found at www.redbubble.com/people/this...
This Does Not Compute
PO Box 131141
St. Paul, MN 55113
---------------------------------------------------------------------------
Music by Anitek (freemusicarchive.org/music/Anitek) and BoxCat Games (www.box-cat.com). - Hry
I found this video by accident while looking up DVD laser replacement tutorials. Really absorbing, fascinating stuff! I salute your deermination to get your PS2 working again. Definitely worth a like, I think.
it's possible to clean lens up and down, just move black plastic and little linguee
sometime it s important to clean back (slowly)
I wish I had seen this video before I started my PS2 fix endeavour! I managed to work this out myself fortunately.
I was a bit precious about fixing it as it is my launch one from all those years ago. I can confirm that both the wheel fix and the voltage fix worked for me, but eventually the laser burnt out completely. I knew this as the laser simply didn't turn on. A simple sign of this is the disk NOT SPINNING. I assume the console checks an initial laser read before starting the spin cycle. This at first I thought was the motor worn out, but it turned out to be the laser. I ordered a £6 replacement from the US installed it and it worked!
Another thing to check is to make sure that the screws attaching the laser rail are tight (the two metal rods). Mine were not and I thought my £6 were wasted. After tightening these it worked first time.
Working launch PS2 for the win!
Hey
Oooh, so if I understand correctly, the disc will only spin if the laser is working.
So before I try adjusting anything, I should take the lid off, and put the relevant type of disc in for the particular laser I'm testing, and only if the disc spins should I try adjusting the laser, if not then it needs to be replaced. This is a very handy diagnostic tip!
I'm not sure if 'll attempt this repair just yet, but this is easily one of the better repair instructional videos I've seen on youtube. Thanks for this
even if the ps2 stops reading games you can always just get a network adapter and a HDD and play your games off a HDD with much faster loading times
You need a mod chip still.
+Zestypanda Nope. You just need a Free McBoot memory card or a PS2 DVD like HD Advance/HD Loader. I got a PS2 with 120GB HDD, Network Adapter, and HD Advance, more then 30 games a running fine without DVDs inclding some of the best games like GT3, GTA San Andreas or Vice City.
@Gabi
Sounds neat. Hard Drives (PS2, Xbox) and SD cards (Dreamcast etc) are great when it comes to extending the lives of consoles.
or FreeMCBoot method
Makes playing the expensive retro games null and void though. Which to me is pointless, i'm into playing games off of a hard drive. But not at the cost of the old game discs though. Gaming should include both ways to play your titles via the laser playing drive mechanism or the HDD!
spent 2 hours trying other youtube videos until I found this one. this video had all the right advice and got our system back to reading CDs again. thank you.
I've watched your repair guide on GameCube laser adjustment and I learned a lot. Now, I already repaired 4 GameCube consoles. What I like about your tutorials, is that you really explained it very well and so simple for us to be able to do it by ourselves. Also I liked that you tell us the default voltage or ohms or whatever, of the laser.
Absolutely great video. Thank you for the detailed steps, I managed to get my PS2 working again.
In the nicest way possible, I'm glad it wasn't as simple as cleaning the laser for you. It was extremely intriguing watching you adjust the amount of power the laser was getting. Thank you for the video
Great directions. I will be using this video to repair a few systems I picked up at garage sales and thrift stores over the last few months. Thanks!
One of the fixes worked for me! I cleaned the laser, and adjusted that disc drive gear by 1 click. Thank you!
This video is hands down the best I've seen for a ps2. Not everyone explains it so detailed. Thank you so much you are a life saver.🎉🎉 🎉
This video was excellent Colin... you've saved my old PS2, which for many years now has just been kept in the loft as a sentimental brick ...or so I thought haha! I'm subscribed and looking forward to what other great videos you come up with :)
+Nick Crimmen Awesome, glad you were able to fix it! Thanks for watching!
+This Does Not Compute I did the step where you 🔌 it in and it did not come 🔛 what do I do?
Look at your creepy 😂 face
Thanks Colin, i adjusted the white plastic gear that changes the height of the laser, and now my ps2 works again! It now plays everything except dvd's but I can live with that😂
Live with a ps2 that is capable of only playing 3% of its library ....
I'm really liking this guy and his channel. Almost everything I search games maintenance related his videos pop up.
This video worked for me, I turned the cog back to the pin and it worked, I recently purchased Manhunt and the video playback was jittery, now it's incredibly smooth and games load as if the unit was brand new.
Sometimes I watch these videos because the music is BALLER! Love the music he has in his videos and I'm so glad he never changed his intro music.
I really appreciate this video, it gave me enough confidence to fix my ps2.
I’d like to say thank you so much for this breakdown tutorial. My PS2 stopped working a while back, but it has been moved about a bit. Now we are in lockdown, what better time to get fixing. Luckily I had all the tools. I had a rain storm when you said there are two lasers. So I tried ps1 games (CDs) and they worked. Ps2 games (DVD’s) didn’t. I got all the way to the cog part, took ages, but finally managed to get it to work! Amazing, I was losing hope. Be patient with the cog bit.
i cant thank u enough dude. out of every 10 CDs i bought at least 7 of them didnt load and i only cleaned the dust and the lens and i can play around 10 more of my old and new games thanks to u💚
Thanks for this video! 5 clicks clockwise on the adjustment wheel made all the difference. I believe the plastic laser arm that sets against a worm gear is sagging over time, so this adjustment compensated for that.
Thanks a lot!! My PS2 was reading DVDs and DVD games fine, but nothing CD related worked until I did the "Wheel adjustment", and now every CD i put in works fine
I love your videos, man. I coulda sworn I was already subbed, but now that's fixed. ONWARD, to replacing my PS2 Slim's optical drive!
I like it! the keep it simple approach! Start with the most common solution and work your way up. This will come in handy for me soon as my brother has A PS2 that gives disc read error messages with DVD based games.
Thank you! Just got a PS2 at Goodwill. The gear thing was the issue. Adjusted it and it lives!
By far the best PS2 informational video I've ever seen.
horrible editing though, his face appearing every 5 sec after such short clips of the console makes it really unwatchable
You are a GOD mister! My PS2 FAT did not readed PS1 CD-s anymore so well, so I decided to open it and try a laser calibration. I was just looking for a video in HD and a clean workspace like your's. The laser calibration worked like a charm with the only differece that my model got two of them to adjust and my upper case had no cables atached from the buttons. In my model the buttons cables was hidden inside what made everything more easy! You really saved my day! Thank you so much and have a blessed life! :)
Much thanks dude for. the info. Your video was the only one I could see and understand. My PS2 lives again. Keep up the good work. ✋👊🤘
This is my first time watching a video from your channel and I have to say that you do a great job, both content and production wise. My FAT ps2 is currently struggling to read discs, I'll try out your recommended methods in due course. Thanks for the help!
Achievement get: +1 subscriber
Worked like a charm. The only confusing bit was related to the replacement laser I purchased from Amazon. The seller stated that there was a piece of solder they used for ESD protection and it needed to be removed before the laser would work. However, they didn't explicitly identify the location of the solder. I compared my old laser to the new laser and was able to identify where I needed to remove the solder.
Worked like a charm for me. The white gear you recommended to turn is what fixed it for me. Had to go counter clockwise one notch. But for some reason mine gear was different then yours. Mine had a Phillips head screw on the top but I just adjust the notch bye hand instead and it fixed my blue disc issue. Thanks a lot. Liked and subbed.
I often wondered what Bob Lazar was up to since quitting Area 51. Now I find him here back engineering PS2's! Thanks ;)
Lmao you're mean
Good video.I like how you explain in your video, why something doesn't work properly,and what it takes to fix it.☺👍
Very good video! Thank you for putting this together. My model is an SCP 50004 with an HD7 laser but the concept is the mostly the same.
Virtua Fighter 4 Evolution was by far my favorite PS2 game kudos for that disk.
My compliments to Colin for this video, as this helped me fix my own PS2. Before, it worked fine with most DVDs and even PS1 games without a CD audio soundtrack, while most of the time it didn't like PS1 CDs with a CDDA soundtrack, PS2 CDs, and audio CDs. Before, if I try a bunch of times, use the Diagnosis mode, and with sheer luck, I could get it to work, but a lot of the time, it doesn't. Now, thanks to this video, it now consistently reads those CD formats. So, thank you for this video. 👍
I have been subscribed to you for a while. Currently I am fighting this with a PS2 I just picked up. Saw your video and smiled because, well, I subscribe to you and love your content. Great video.
I fix the grinding sound and disc error with this review. Thanks man.
very clear instruction dude, double thumbs up for you
Finally, a very clearly outlined video to troubleshoot disc reading problems on a PS2. THANK YOU!!!!!!!!!
Thanks TDNC Man. I opened her up, and cleaned the lens with a alcohol pad and a baby Q-tip. My PS-2 works great now. Even found my old copy of San Andreas. today was a good day.
Putting the top cover on, the power buttons ribbon cable can be a pain though.
Thanks Jeffrey, I'm gonna try some of these tips and hope it works for me
When I tried doing all this when I was younger, I ended up breaking the plastic bit that locks the controller ribbons in place. Let's just say I never tried again after all that happened.
The same thing happend to me but the ribbon cable snapped to turn the ps2 on
I recently did this. I used thick paper (the type used in business cards) to push it against the contact and then used a hot glue gun to secure the connection. controllers and memcards work perfectly now.
Thank you for this video it helped me fix my PlayStation too I had to adjust the white gear 2 notches and boom it worked again thank you for the content!
That's what I did during the prime of PS1 before PS2 was launch by measuring the ohms of potentiometer like you did before I adjust it. My PS1 was already picky and after I adjusted it, the disc that don't work works again but some disc that still works don't work anymore so I adjusted the potentiometer back to its original resistance. Tilting the PS1 system 45 degrees helps read the disc. My PS2 still okay, though.
That almost sounds like the carriage mechanism that moves the laser is encountering to much resistance, cause a laser that is dying generally wont start working just cause you tilted the machine, but if the rails were gummed up tilting and letting gravity help would do the trick, it could also be a weak motor that just doesnt have the balls to move the sled when the machine is level, though from hearing the PS1 is known for failing disc drives, mine still seems to work, but maybe thats cause i tend to just use my PS2 to run PS1 games and my PS1 is a more of a show piece now, since both my PS1 and 2 are both first generation models that ive had since they were new.
You are a hero among men for posting this, gonna try it I have 6 ps2's with 5 of them being inoperable don't need that many paperweights. I just wish I could've had your warning about the power supply when I was a kid, instead I learned about that the hard way.
You don't have to take out the whole assembly of the laser, just to get access on the potentiometer. Just take out the one screw on the right side rod that's holding the laser. By doing that, you can now lift that rod and adjust the laser.
Thanks for this! So much easier!
Great video. Exactly what I was looking for.
Interesting video and offers some ideas even if you weren't able to repair your PS2 here, thanks.
Yup, the laser was just stuck and Think I needed to clean the lens. You Are Awesome! Thanks, teacher!!!!!!
Sir, you're the tops. Great video! My ps2 partially works, but the CD reader often grinds and freezes games when loading. I think the 1st tracking wheel tweak might do me.
Thank you. I got a PS2 from a bin, that wouldn't read game discs or DVD's, so I thought the drive was toast, but because of your video I found out that it was only the DVD laser that wasn't working.
I'll try tweking it, and if that doesn't work, I guess I'll get a new laser. In any event, your video was very helpful!
Hi Colin! I love the range of troubleshooting and repair vids you've got. Any chance you could also add one for the PS2 slim somewhere down the line?? ^^
Hey thanks for the video! Was able to clear the error by cleaning the laser.
really helpful thanks!
for me turning the hex 6 teeth counter clock wise did the trick
It seemed mine just needed a cleaning! Much appreciated tutorial!
I had no idea the optics were so easily accessed, got two of my phat systems (one failed the other marginal) back on line. The tip to try with a DVD and a CD was crucial. Thank you so much for getting me ready for an upcoming summer party with a game room with functional (albeit old) systems. Failed media drives happen so often on 90s era Sun Workstations, I'll have to try this technique my next opportunity.
nice tutorial my friend
so what did you do?
do you buy a new laser lens ?
oh my god... i totally fixed the DVD playback using your vid. the factory dvd pot on my scph-39001 was set to 1.373 ohms. i tried the hex adjustment first. it was way off. the hole did not line up with the notch from factory. bringing them in line did nothing. i adjusted the pot 1.246 then adjusted the notches.. nothing. second pot tweak to 1.014 then suddenly it started seeing the disc. i moved the notch one tooth at a time while turn the ps2 back on.. more success.. finally, 6 teeth off clockwise from "my factory setting" was the magic formula. Damn. thank you so much for your work on this. you really helped me out! :)
Thank you so much you helped me fix my ps2!!! It works just fine now
hey Colin, it's going good man thanks for asking as always,
awesome video !
Thank you so much for this tutorial! I got my ps2 to read dvds again!
Aye bro,I’ve had my fat ps2 since my dad got it at launch, tonight my roommate and I got to the part where you had to turn that white gear a notch, now we playing MK Armageddon, thought I lost my relic forever,thank you💪🏻
Dude, the dial fixed it, thanks a lot!
Thank you! This was awesome and I got mine up and running!!!
Just fixed my PS2. Thank you, sir!
thanks for whole step-wise amazing instruction, My PS2 oddly works great for movies DVD but fails to run games.
Hey ! I tried adjusting the gears with a hexagonnal screw, two clicks clockwise and now my ps2 read my disc very fast. Thank you !!!!
Hi thanks. Really informative. I purchased a new laser online for $22 a us, but I had mucked around with it so much that I ended up breaking the laser data ribbon. Now I am waiting on that to arrive. Have to admit that yes I could.buy another one cheap but I am having fun with the repair, and at this point I have too much time invested in it, so it's like vendetta now. Really enjoyed your video. Thanks Glen in Australia
I fix game consoles on a daily basis and I can tell you that 99% of the time when a PS2 won't read a disc you can repair it simply by cleaning the surface of the lens with a q tip and alcohol as shown in this video... That being said, never jump a head in steps unless you know for certain that is not the issue.
Mines is the Laser wont read the disc, any solutions to that?
Tracking fixed mine! Many thanks
That was very helpful I really appreciate your work... thanks
7 year old video saved me. Great instructions my issue was the Adjustment Wheel.
Great job with this video! Just got yourself another sub.
The wheel adjustment is what worked for me. Although my model 50001 had two wheels to adjust. I was having trouble loading a certain part in Mega Man Legends and Okami had choppy audio in the intro. One turn in each wheel to the right did the trick. I would highly recommend against adjusting the potentiometer unless you know what you’re doing.
Excellent work! Very nice indeed. Thank you
Thank you for making such a nice tutorial video 👍👍👍
Thanks for the video, my ps2 came out of storage with an issue similar to yours. The lens alignment was off 6 clicks counterclockwise.
Thank you for walking all the way through to the innards with common errors bookmarked! Incredibly helpful! Infuriating sifting through vids w singular problem/solutions
Having the same problem right now. I just want to play my Romance of the three kingdoms games!!
Thx, this worked very well for me!
Great, as always !
Perfectly done tutorial. Very clear explanations paired with nicely shot video clips. Thank you. My ps2 is now reading discs after many years.
Thanks for the video it's great advice and help but do u have a website to purchase disc drives? I can't find them anywhere
This helped me, thanks!
where can I buy Optical Lens replacements for the PS2 model 390001
Thank you you helped me fix my ps 2
"Just pull the ribbon cable and it should come right out."
Yeah, have fun spending the next three years trying to reconnect it, though.
This fixed my ps2 thank u so much!!
Thanks Colin, I'll let you know how my fix goes!
Hi Colin how's it going?
The same thing happened with my PS2 Slim, the drive does not spin at all. Took it apart and the laser is clean and moved fine. Guess the motor's a gonner?
I don't have the same problem as what is shown here, but the information you give is clear and precise. I have a problem with one of the consoles I have were the disc twitches, so i'm assuming that the ribbon cable that connects the tracking servo to the motherboard may have lost connection. The laser seems to be working fine, and there appears to be no scratches on the lens. I'll find out tomorrow.
Thanks! Ohm at 1008 on DVD did the trick for me (CD was working, but not the DVD-rom nor DVD-video).
Works with me. Thank you! :)
Turing that calibration gear or whatever it's called REALLY WORKS! I had to turn mine passed 180 degrees clockwise before it worked. BUT IT WORKED!
For years, I thought my PS2 was just a memory. This video changed that! Thanks!
Awesome tutorial thanks!
Cleaning the laser did the job for me. I was surprised, I expected it to be dead.
Does exchanging the disc drive part with another ps2 from another region ps2 make it play those games or is there still a lock out region thing to overcome ? Cool video. ^_^
And the gear thing worked for me thank you so much
Out of curiosity did you try turning on diagnostics and putting a disk in before disassembly? Supposedly it helps Re-focus the laser but iirc it was for cd based ps2 games.
Great video. Can you do this tutorial on Wii U console? Thanks.